Theoretical Studies on the Abstraction Reaction of Atomic O（^3p） with Si2H6

The hydrogen abstraction reaction of O(^3P) with Si2H6 has been studied theoretially. Two transition states of ^3A″ and ^3A′ symmetries have been located for this abstraction reaction. Geometries have been optimized at the UMP2 leve with 6-311G (d) basis set. G3MP2 has been used for the final single-point energy calculation. The rate constants have been calculated over a wide temperature range of 200-3000K using canonical variational transition-state sheory (CVT) with small curvature tunneling effect(SCT). The calculated CVT/SCT rate constants match well with the experimental value.     

Brønsted Acidity and Aluminum Substitution Characteristics of Si(nAi) Sites in Zeolites: A Theoretical MNDO Calculation

The Brønsted acidity of the various Si(nAl) sites present in zeolites is evaluated from proton binding energy and LUMO energy calculated by the semiempirical MNDO quantum chemical method. The two calculated energy values both exhibit a linear correlation with the existing ²⁹Si NMR chemical shift and the IR hydroxyl stretching frequency data. The inter-convertibility between different Si(nAl) sites during an alumination or dealumination process is also evaluated based on the calculated substitution energy. The results indicate that alumination processes are less favorable to occur in zeolites than dealumination processes and the latter is more likely to occur for Si(nAl) clusters that contain the maximum number of aluminum nearest neighbors.     

Optimum performance of capillary GC columns as a function of tube diameter and film thickness under various operating conditions. Computer program for calculation of H-ū curves and minimum analysis times

The Golay-Giddings and Poiseuille equations are used to derive equations for the calculation of the maximum plate number and minimum time conditions for given columns at fixed, but selectable, outlet pressures. In addition, expressions are presented for the determination of minimum analysis times for separation problems requiring given plate numbers. In this instance, the optimum column length can be calculated as a function of outlet pressure. A Basic computer program, incorporating the equations for the various optima, together with the H-ū curves, is described. Input variables are either column length or desired plate number, column diameter, film thickness, capacity ratio of the solute, column outlet pressure, seperation temperature, and carrier gas. The carrier gas viscosity is automatically calculated in the case of hydrogen, helium, or nitrogen. For these gases, and if the solute is a n-alkane, the diffusivity of the solute in the mobile phase is calculated. In this case, the carbon number of the solute is needed in the computation. For high molecular weight polydimethylsilicone phases (e.g. SE-30), the program can approximate the diffusivity of n-alkanes in the stationary phase at the given temperature as a function of the carbon number. Of course, manually entered values of viscosity and diffusion coefficients can be included in the calculations.     

Neue Alkalioxoarsenate(V): NaLi2[AsO4] — ein neuer Formeltyp [1]

New Alkali Oxoarsenates(V): NaLi₂[AsO₄] — A New Type of Formula [1] . By heating of well ground mixtures of the binary oxides As₂O₃, Na₂O, and Li₂O₂, molar ratio As:Na:Li = 1.0:1.0:2.0, in a well closed Ni tube (650°C, 21 d) colourless single crystals of NaLi₂[AsO₄] were obtained for the first time. The new orthoarsenate(V) crystallizes orthorhombic (space group P mn2₁-C, No. 31) with Z = 2. The structure determination showed that it is isostructural to β_II-Li₃[VO₄] and that means the Li₃[PO₄]-type. The lattice constants a = 702.9(2) pm, b = 520.5(1) pm, c = 505.4(2) pm were taken from Guinier-Simon powder data. The structure was determined by four-circle diffractometer data [Philips PW 1 100, AgKα , 679 independent out of 2 373 I_o(hkl), R = 3.03%, R_w = 2.29%; parameter see text]. The Madelung Part of Lattice Energy, MAPLE, and Effective Coordination Numbers, ECoN, these calculated via Mean Fictive Ionic Radii, MEFIR, are calculated and discussed.     

高次非球面光路计算中的两个重要问题

提出在高次非球面的光路计算中运用变曲率的“辅助球面”概念,对某些文献在此方面存在的问题进行分析,提出迭代逼近精度的数值判据及浮动处理方法。     

Simple test system for single molecule recognition force microscopy

We have established an easy-to-use test system for detecting receptor-ligand interactions on the single molecule level using atomic force microscopy (AFM). For this, avidin-biotin, probably the best characterized receptor-ligand pair, was chosen. AFM sensors were prepared containing tethered biotin molecules at sufficiently low surface concentrations appropriate for single molecule studies. A biotin tether, consisting of a 6 nm poly(ethylene glycol) (PEG) chain and a functional succinimide group at the other end, was newly synthesized and covalently coupled to amine-functionalized AFM tips. In particular, PEG₈₀₀ diamine was glutarylated, the mono-adduct NH₂-PEG-COOH was isolated by ion exchange chromatography and reacted with biotin succinimidylester to give biotin-PEG-COOH which was then activated as N-hydroxysuccinimide (NHS) ester to give the biotin-PEG-NHS conjugate which was coupled to the aminofunctionalized AFM tip. The motional freedom provided by PEG allows for free rotation of the biotin molecule on the AFM sensor and for specific binding to avidin which had been adsorbed to mica surfaces via electrostatic interactions. Specific avidin-biotin recognition events were discriminated from nonspecific tip-mica adhesion by their typical unbinding force (∼40 pN at 1.4 nN/s loading rate), unbinding length (<13 nm), the characteristic nonlinear force-distance relation of the PEG linker, and by specific block with excess of free d-biotin. The convenience of the test system allowed to evaluate, and compare, different methods and conditions of tip aminofunctionalization with respect to specific binding and nonspecific adhesion. It is concluded that this system is well suited as calibration or start-up kit for single molecule recognition force microscopy.     

Effect of substituents (NH_2,OH,F) on structures and stability of lithofluorosilylenoids

Ｓｉｌｙｌｅｎｅｉｓｔｈｅｓｉｍｉｌａｒｉｔｙｏｆｓｉｌｉｃｏｎｔｏｃａｒｂｅｎｅ,ａｎｄ,ｌｉｋｅｃａｒｂｅｎｅｉｎｏｒｇａｎｉｃｒｅａｃｔｉｏｎｓ,ｉｔｐｌａｙｓａｖｅｒｙｉｍｐｏｒｔａｎｔｒｏｌｅｉｎｏｒｇａｎｏｓｉｌｉｃｏｎｒｅａｃｔｉｏｎｓ.Ｉｎｒｅｃｅｎｔｙｅａｒｓ,ｔｈｅｒｅｈａｖｅｂｅｅｎｍａｎｙｒｅｐｏｒｔｓｏｎｓｉｌｙｌｅｎｅｓｉｎｑｕａｎｔｕｍｃｈｅｍｉｃａｌｒｅｓｅａｒｃｈｅｓ[1—3].Ｉｎｖｅｓｔｉｇａｔｉｏｎｏｎｉｔｓｏｒｇａｎｉｃｒｅａｃｔｉｏｎｓｈｏｗｓｔｈａｔｒｅａｌｉ…     

Significance of Non-isothermal Kinetic Data. A statistical study

Arrhenius parameters values, in non-isothermal kinetic vaporisation processes for a series of compounds with related structures, have been calculated. This was made using a method of calculation that allows to find the most probable vaporisation mechanisms. According to this method DTG curves were compared with some theoretical ones reported in literature, whose shape results to be only a function of the mechanisms. In this way the choice of the mathematical functions which can be inserted in the kinetic equations, was influenced by the shape of the DTG plots and other thermal analysis signals thus allowing to choose the most probable mechanisms. The kinetic parameters derived from these mechanisms were compared, using statistical analysis, with those obtained from another method of calculation based on ‘a priori’ vaporisation mechanism chosen for the investigated liquid–gas transition. The standard deviations of the slope and of the intercept, together with the standard deviation and the square correlation coefficient (r ²) of the linear regression equations related to the mechanisms of the two methods were calculated. Student t-test, Fisher F-test, confidence intervals (c.i.) and residuals valueswere also given. Statistical analysis shows that the mechanisms obtained with the former method (diffusive and geometrical models) and the related Arrhenius parameters result to be more significant (in terms of probability) than the corresponding quantities of the latter for which a first-order model was chosen. This revised version was published online in August 2006 with corrections to the Cover Date.     

Insight into the cation–anion interaction in 1,1,3,3-tetramethylguanidinium lactate ionic liquid

In order to deepen the understanding of cation–anion interaction in ionic liquids (ILs), the structure and interionic interaction of 1,1,3,3-tetramethylguanidinium lactate ([tmg][L]) ion pair, including stable configuration, hydrogen bond, frontier molecular orbital, electron density, ion interaction energy and charge transfer, are studied by using ab initio calculations. It is found that more charge-localized character of [tmg][L], especially the C1 carbocation on [tmg]⁺, and the intermolecular –NH₂-associated hydrogen bonds can substantially increase the cation–anion interaction, the interaction energy is 65.3–109.3 kJ/mol higher than that of 1-n-butyl-3-methylimidazolium-based ILs. It is also found that the frontier molecular orbitals, i.e., the HOMO, HOMO + 1 of [L]⁻ and the LUMO, LUMO + 1 of [tmg]⁺, can effectively interact and more charges are transferred between cation and anion. Based on the above results, the physical property of ILs is discussed.     

锌族和钛族卤化物振动光谱的理论计算

采用ab initio RHF,MP2和B3LYP方法以及LanL2DZ和SDD基组计算了四面体锌族卤素阴离子化合物(MX₄^2-,M=Zn(Ⅱ),Cd(Ⅱ),Hg(Ⅱ);X=F^-,Cl^-,Br^-,I^-)和钛族卤化物(MX₄,M=Ti(Ⅳ),Zr(Ⅳ),Hf(Ⅳ);X=F^-,Cl^-,Br^-,I^-)的几何构型和振动频率。计算结果表明,LanL2DZ基组是合适的基组,能得到合理的电荷分布,几何参数以及振动频率。在锌族卤化物的计算中发现,角弯曲振动频率与实测值相当一致,键伸缩振动频率略为偏低,这主要是由于计算的键长略为偏长所致。MP2方法计算的振动频率更接近于实测值。在钛族卤化物的计算中,三种计算方法都相当地再现了实测值,而以B3LYP方法更为满意。