基于声粒子分布积分的无网格声场计算方法

小尺度封闭空间内部声场的数值计算是声学设计、噪声控制等领域的关键技术。由于波动声学及几何声学方法计算频率上的限制,中频段声场计算问题一直是个难点。本文以声学无网格法为基础,提出了一种基于声粒子分布积分的无网格声场数值计算方法。文中利用声线跟踪理论计算声场中的声粒子分布,并以某个时间点上的声粒子作为蒙特卡罗法中的积分点,将其应用于无网格法中,从而获得声场中的节点声压。利用该方法对一个矩形封闭空间的中低频声场进行了计算,并与模态叠加法、商用声场计算软件、经典无网格法的结果进行了对比,证明基于声粒子分布积分的无网格声场数值计算方法在中低频段相较于传统基于网格的方法具有更高的精度。     

Fabrication and testing of a newly designed slit system for depth‐resolved X‐ray diffraction measurements

A new system of slits called `spiderweb slits' have been developed for depth‐resolved powder or polycrystalline X‐ray diffraction measurements. The slits act on diffracted X‐rays to select a particular gauge volume of sample, while absorbing diffracted X‐rays from outside of this volume. Although the slit geometry is to some extent similar to that of previously developed conical slits or spiral slits, this new design has advantages over the previous ones in use for complex heterogeneous materials and in situ and operando diffraction measurements. For example, the slits can measure a majority of any diffraction cone for any polycrystalline material, over a continuous range of diffraction angles, and work for X‐ray energies of tens to hundreds of kiloelectronvolts. The design is generated and optimized using ray‐tracing simulations, and fabricated through laser micromachining. The first prototype was successfully tested at the X17A beamline at the National Synchrotron Light Source, and shows similar performance to simulations, demonstrating gauge volume selection for standard powders, for all diffraction peaks over angles of 2–10°. A similar, but improved, design will be implemented at the X‐ray Powder Diffraction beamline at the National Synchrotron Light Source II.     

An algorithm for computing minimal Geršgorin sets

The existing algorithms for computing the minimal Ger?gorin set are designed for small and medium size (irreducible) matrices and based on Perron root computations coupled with bisection method and sampling techniques. Here, we first discuss the drawbacks of the existing methods and present a new approach based on the modified Newton's method to find zeros of the parameter dependent left‐most eigenvalue of a Z‐matrix and a special curve tracing procedure. The advantages of the new approach are presented on several test examples that arise in practical applications. Copyright © 2015 John Wiley & Sons, Ltd.     

Improvement of Contact Tracing with Citizen’s Distributed Risk Maps

The rapid spread of COVID-19 has demonstrated the need for accurate information to contain its diffusion. Technological solutions are a complement that can help citizens to be informed about the risk in their environment. Although measures such as contact traceability have been successful in some countries, their use raises society’s resistance. This paper proposes a variation of the consensus processes in directed networks to create a risk map of a determined area. The process shares information with trusted contacts: people we would notify in the case of being infected. When the process converges, each participant would have obtained the risk map for the selected zone. The results are compared with the pilot project’s impact testing of the Spanish contact tracing app (RadarCOVID). The paper also depicts the results combining both strategies: contact tracing to detect potential infections and risk maps to avoid movements into conflictive areas. Although some works affirm that contact tracing apps need 60% of users to control the propagation, our results indicate that a 40% could be enough. On the other hand, the elaboration of risk maps could work with only 20% of active installations, but the effect is to delay the propagation instead of reducing the contagion. With both active strategies, this methodology is able to significantly reduce infected people with fewer participants.     

Distribution characteristics and source tracing of petroleum hydrocarbons in the northeastern South China Sea

In recent years, oil spills caused by human activities have occurred frequently, and the resultant oil pollution has received extensive attention worldwide. In this paper, a total of 50 water samples were collected from the northeastern part of the South China Sea, and total petroleum hydrocarbons (TPHs) and n-alkane content in the samples were analyzed by gas chromatography-flame ionization detector (GC-FID) technology. The petroleum hydrocarbon characteristic indices, such as carbon predominance index (CPI) and terrigenous/aquatic ratio (TAR), were calculated to trace the source of petroleum hydrocarbons. The measured value of TPHs ranged from 121.31–603.02 μg/L. For surface waters, the TPHs in the northern coastal waters and the central waters were higher than that in the far shore. For vertical waters, the TPHs sharply decreased at first, and then increased slowly and finally reached a steady state. The n-alkanes in the water samples were concentrated in C10-C38, and they were mainly from terrestrial higher plant. The waters in the near shore, mid-layer and deep sea showed a strong reducing terrestrial characteristic, while the surface waters in the open sea showed an obvious oxidizing endogenous characteristic.     

气动光学头罩光传输数值仿真

 气动热环境下光学头罩由于受气动热效应作用,其形状和光学性质都将发生改变,从而影响头罩内的光传输。建立气动光学头罩有限元分析模型,根据热光效应和弹光效应理论,对头罩的折射率场进行数值计算,采用四阶龙格-库塔法编制光线追迹程序对气动光学头罩内红外辐射光线传输进行了数值仿真,得到了头罩光学系统出射波面波像差和调制传递函数。研究结果表明：气动热环境下热光效应对光学头罩光传输的影响远比弹光效应大,且气动光学头罩成像质量受到气动热效应的影响严重下降,为了提高高速飞行器的制导精度,不能忽视气动热对头罩光传输的影响。     

光纤耦合激光束输出光空间分布及其影响因素分析

通过分析光纤出射端面的光强分布,研究了光纤传输过程中激光二极管出射光束进入光纤时的指向角对出射端面光场分布的影响.提出一种影响光纤输出端光场的新因素,对数值孔径和光纤芯径两个影响因素进行了补充.在光纤传输过程中,将激光二极管出射的光束等效为大量光线,在二极管输出光的位置以及空间分布确定的情况下,使用光线追迹方法依次分析...     

基于p-FTIR和p-XRF测试组合的大汶口文化蛇纹石质玉器无损检测及产地溯源分析

出土玉器溯源是探索华夏玉器文明起源与演化的关键所在,无损测试技术的进步推动了学术界对出土玉器产地溯源的研究,但至今为止,无损技术仍然是制约出土玉器溯源研究的瓶颈所在。利用便携红外光谱（portable Fourier transform infrared spectroscopy,p-FTIR, 带漫反射附件）+ 便携X射线荧光光谱（portable X-ray flourescence, p-XRF）技术组合对山东省文物与考古研究院发掘的大汶口文化出土蛇纹石质玉器的物相和化学组成进行了无损测试以及出土玉器产地溯源的探索。测试结果显示,大汶口文化的蛇纹石玉存在两种成因类型,其中7件玉器（M1005:3,M1006:4,M1013:12,M20:30,M11,T333:2B①：2,M49:04）属于超基性岩型,Fe,Cr和Ni含量较高,含较多磁铁矿包体,磁性较强,Cr/Ni值小于1且多数小于0.7,与现代泰山玉的产地特征基本一致,最大可能就地取材于附近的泰山山麓,为泰山玉的使用时间提前到5500年前的大汶口文化时期提供了重要的科学依据。另外4件玉器（M2004:1、B型环、M25：26、M26）具有低Fe,Cr和Ni含量,为富镁碳酸盐接触交代变质类型,其来源有待进一步研究确认。上述研究结果确认p-FTIR和p-XRF结合能够实现对考古现场及馆藏多数未知玉器材料的快速鉴定,具有无需制样、矿物类型和元素组成可相互验证、无荧光干扰等优点,对部分特定类型的蛇纹石质出土玉器/材料可进行产地来源分析,是一种有优势的出土玉器无损测试技术组合。     

基于子网划分的电网关键节点识别

结合电网拓扑结构和潮流追踪技术,提出一种基于子网划分的电网关键节点识别方法。首先,根据发电机节点的邻域信息和功率将发电机节点划分为不同的子集,然后根据电网的系数分配矩阵将负荷节点划分到为其提供最大功率的发电机节点子集中,完成子网划分。接着采用多属性决策法对每个子网的节点进行排序,进一步改进并计算每个子网的结构系数,作为衡量子网重要性的指标。根据子网重要性,从每个子网中提取特定比例的候选关键节点,对这些候选节点依据多属性决策法重新排序,得到关键节点的最终排序。以IEEE14、IEEE57和IEEE118三种节点系统为例进行分析,得到各个系统的子网划分结果和各个标准网络的重要节点排序结果。采用本文方法、PageRank法和多属性决策法分别进行关键节点排序,并对排序靠前的关键节点进行级联故障性能实验和网络效能实验。实验表明,本文算法选择的关键节点对整个网络的传播性能影响最大,优于其他两种关键节点识别方法。     

Performance calculations of the X‐ray powder diffraction beamline at NSLS‐II

The X‐ray Powder Diffraction (XPD) beamline at the National Synchrotron Light Source II is a multi‐purpose high‐energy X‐ray diffraction beamline with high throughput and high resolution. The beamline uses a sagittally bent double‐Laue crystal monochromator to provide X‐rays over a large energy range (30–70 keV). In this paper the optical design and the calculated performance of the XPD beamline are presented. The damping wiggler source is simulated by the SRW code and a filter system is designed to optimize the photon flux as well as to reduce the heat load on the first optics. The final beamline performance under two operation modes is simulated using the SHADOW program. For the first time a multi‐lamellar model is introduced and implemented in the ray tracing of the bent Laue crystal monochromator. The optimization and the optical properties of the vertical focusing mirror are also discussed. Finally, the instrumental resolution function of the XPD beamline is described in an analytical method.