一种应用于LCoS光机的复眼照明系统仿真设计

复眼照明系统利用复眼透镜,可实现高亮度和较好的亮度均匀性,并且有较成熟的偏振处理方法,在投影系统特别是基于偏振光的投影系统中能提供比光棒照明系统更加高的亮度和好的均匀性的画面,使得光能利用率和图像均匀性有了较大的提高。在对复眼照明系统的原理进行分析的基础上,设计了一种用于投影光机的复眼照明系统,并用Matlab对该系统进行了光线追迹的仿真程序设计。对复眼照明系统的光线追迹进行了仿真。实际应用证明,在LCoS中采用本方案设计的照明系统比光棒照明系统具有更高的亮度和更好的均匀性。     

孔梯度陶瓷纤维复合膜管的制备及特性

陶瓷过滤管具有孔隙率高、耐腐蚀、耐高温、机械强度高、便于清洗、使用寿命长等优点,是高温烟尘处理用的高效过滤元件.本文研制了一种具有梯度孔结构堇青石陶瓷纤维复合膜过滤元件,该过滤元件是由多孔支撑体、过渡层和分离膜层组成.其中支撑体、过渡层和分离层的气孔率分别为35～40;、50～60;和60～70;.文中主要分析了孔梯度陶瓷纤维复合膜管的材料结构和抗热震性能,同时对复合膜管进行含尘气体过滤的冷态模拟试验.对于烟气中粒径大于或等于0.1μm的颗粒,复合膜管的截留率达到99.8;以上.     

基于激光吸收光谱乙炔在线监测技术的研究

乙炔作为有机化工产品原料,广泛应用于化学工业中,但易燃易爆,在储存和工业生产中有必要对其进行实时在线监测.可调谐半导体激光吸收光谱(TDLAS)技术具有高选择性、高灵敏、快速响应等特点,在痕量气体检测中得到了广泛的应用.文章研究了乙炔气体在近红外波段的吸收线分布特征,详细地讨论了基于近红外可调谐二极管激光吸收光谱技术的乙炔在线监测系统设计方案;建立了实验测量系统,研究了信号检测方法和浓度反演算法,对长度10 cm的样品池和已知标准浓度乙炔气体配制的不同浓度乙炔气体进行检测,检测限可以达到1.46 cm3·m-3;进行了动态检测实验,测量结果具有较好的稳定性和可靠性.分析表明系统设计方案可行,由此发展的乙炔在线监测系统可用于乙炔储存、运输和使用过程中泄漏报警.     

Discrete Boltzmann Method with Maxwell-Type Boundary Condition for Slip Flow

The rarefied effect of gas flow in microchannel is significant and cannot be well described by traditional hydrodynamic models. It has been known that discrete Boltzmann model(DBM) has the potential to investigate flows in a relatively wider range of Knudsen number because of its intrinsic kinetic nature inherited from Boltzmann equation.It is crucial to have a proper kinetic boundary condition for DBM to capture the velocity slip and the flow characteristics in the Knudsen layer. In this paper, we present a DBM combined with Maxwell-type boundary condition model for slip flow. The tangential momentum accommodation coefficient is introduced to implement a gas-surface interaction model.Both the velocity slip and the Knudsen layer under various Knudsen numbers and accommodation coefficients can be well described. Two kinds of slip flows, including Couette flow and Poiseuille flow, are simulated to verify the model.To dynamically compare results from different models, the relation between the definition of Knudsen number in hard sphere model and that in BGK model is clarified.     

基于经验模态分解的SO_2浓度检测信号处理方法

荧光法测量SO2浓度是大气监测中常用的检测手段.双光路技术可以消除光源和光路的噪音干扰,但光电转换器件在激发光照射下产生的背景噪音也会影响定量分析的准确度.本文采用经验模态分解滤波算法降低检测中存在的各种噪音,在实现有效降噪的基础上较好地保存了有用的原始信号.仿真结果表明,针对SO2浓度检测系统,利用经验模态分解去噪后信号的信噪比达到204.273 6,均方误差为0.007 0.与小波去噪法相比,经验模态分解检测效果更佳.最后将经两组不同方法处理后的信号应用于气体检测系统中,实验数据的线性关系更好地验证了经验模态分解方法应用到浓度检测系统的可行性.     

基于布拉格光栅的边坡监测实验研究

提出了一种基于分布式光纤光栅的边坡监测与报警系统.根据强度折减法,利用ANSYS软件分析出边坡的软弱面及滑体所在的具体位置,从而在该处安装经过特殊封装的拉线式光纤光栅位移传感器.滑体的位移通过拉线转换为作用在光栅上的应力,而光纤光栅反射波长与应变具有良好的线性关系,因此通过检测光栅反射光的中心波长的偏移量,就可以解调出...     

Computer simulation of some dynamical properties of the Lorentz gas

We carried out molecular dynamics simulations of a Lorentz gas, consisting of a lone hydrogen molecule moving in a sea of stationary argon atoms. A Lennard-Jones form was assumed for the H₂-Ar potential. The calculations were performed at a reduced temperatureK ^* =kT/_{H 2–Ar} = 4.64 and at reduced densities ^*= _{Ar Ar} ³ in the range 0.074–0.414. The placement of Ar atoms was assumed to be random rather than dictated by equilibrium considerations. We followed the trajectories of many H₂ molecules, each of which is assigned in turn a velocity given by the Maxwell-Boltzmann distribution at the temperature of the simulation. Solving the equations of motion classically, we obtained the translational part of the incoherent dynamic structure factor for the H₂ molecule,S _tr(q, ). This was convoluted with the rotational structure factorS _rot(q, ) calculated assuming unhindered rotation to obtain the total structure factorS(q, ). Our results agree well with experimental data on this function obtained by Egelstaffet al. At the highest density ( ^*=0.414) we studied the dependence ofS(q, ) on system size (number of Ar atoms), number of H₂ molecules for which trajectories are generated, and the length of time over which these trajectories are followed.     

制冷剂过热气体热力性质的隐式拟合方法

准确、快速、稳定地计算制冷剂热力性质是计算机辅助设计和工程计算的要求。本文将 隐式拟合方法与Ｍａｒｔｉｎ－Ｈｏｕ方程相结合,提出制冷剂过热气体热力性质的隐式拟合方法,该方法 不仅具有形式统一、精度高、速度快、外推性和稳定性好的优点,而且保证了过热区与两相区之间 热力性质的连续性。     

气粒混合物非灰辐射特性合并宽窄谱带K分布模型

气粒混合物辐射问题具有全场性、非灰性、耦合性等特点,准确预估高温燃气/粒子非灰辐射特性是非常重要的。本文将合并宽窄谱带K分布模础(CWNBCK)与离散坐标法(DOM)结合,开展了非灰气粒混合物辐射换热问题的模拟工作,分别验证了一维和三维情况下应用该模型的准确性,给出不同工况下的热流源项、壁面热流或辐射热流等。结果表明:该模型能够给出与SNB模型精度基本相同的结果,考虑其计算效率的提高,可以在工程实际中应用该模型计算非灰气粒混合物辐射换热。     

分布式冷热电三联供系统的单耗分析模型研究

基于"单耗分析"理论,建立了针对燃料为天然气的分布式冷、热、电三联产系统的常见运行模式下的多热源、多冷源的燃料单耗模型和成本单耗模型.利用该模型进行了案例计算,结果清楚地表明了系统各个环节燃料附加单耗的分布.通过对计算结果的分析,得出了一些有益的结论.