发射光谱法对早期激光诱导铝合金等离子体诊断研究

对激光诱导等离子体参数进行诊断有多种方法,其中采用发射光谱法对其诊断是一种重要的方法。文中采用Nd∶YAG固态激光器,输出波长1 064 nm红外激光与铝合金样品相互作用,深入研究了铝合金等离子体产生早期(<1 μs)谱线轮廓、谱线强度、线背比、谱线半峰宽及位移等随时间演变规律。研究表明,激光与物质相互作用早期,电子数密度非常大,电子与离子及原子之间的相互作用非常强烈,谱线的Stark展宽效应非常明显,导致多重谱线重叠在一起,随时间演变,电子数密度及电子温度的降低,多重谱线的半峰宽越来越窄且谱线轮廓对称性越来越好。MgⅠ285.212 6 nm谱线强度早期逐渐增强,大约100 ns左右谱线强度达到最大值,然后谱线强度呈逐渐减小的趋势,这是由于等离子体产生早期,电子及离子占主导地位,故早期原子谱线强度较弱,随时间演变,电子与离子之间的复合,原子数密度逐渐增加,故原子谱线逐渐增强,达到最大值之后,由于等离子体激发温度的降低,故谱线强度逐渐减弱。以NIST波长位置为参考,等离子体产生的早期谱线发生了红移,连续背景强度随时间演变呈幂函数形式急剧递减,与之相反,谱线的连续背景强度与谱线强度相比,连续背景衰减的速度更为迅速,故导致谱线信背比随时间演变呈增大趋势,本研究对等离子体早期这些现象从理论角度进行了深入探讨。     

应用于激光外差辐射计的高精度太阳跟踪仪

报道了一套适用于激光外差辐射计的高精度太阳跟踪仪,为激光外差辐射计提供用以反演大气成分的柱浓度和垂直廓线的太阳光。太阳跟踪系统采用太阳运行轨迹跟踪与光电跟踪相结合的跟踪方式,具有精度高、全时空特点。测量了该太阳跟踪仪的跟踪精度,X和Y轴方向跟踪精度分别达到0.068°和0.06°,能够满足激光外差辐射计在大气和天文领域中对太阳光收集的要求。进而把太阳跟踪仪与实验室研制的激光外差辐射计集合起来,测量了3.5 μm附近的太阳光谱,得到了CH₄在整层大气中的吸收情况,为下一步反演整层大气中CH₄的柱浓度和垂直廓线奠定了基础。     

Volatolomics of Sardinian and Spanish Bituminaria: Characterization of Different Accessions Using Chemometrics

The present study aims to determine the volatile compositions of 15 different accessions of native Sardinian populations of Bituminaria morisiana (Pignatti & Metlesics) Greuter, Bituminaria bituminosa (L.) C. H. Stirt. (B. b.), and Spanish native accessions of B. bituminosa. Furthermore, we particularly focused on the essential oil characterization of these accessions and discriminated within populations with low furocoumarin content useful for fodder production in Mediterranean environments or furocoumarin extraction for pharmaceutical utilization. The plant extracts were analyzed by GC/MS, showing great variability in the content and composition. No differences were found in Bituminaria bituminosa (L.) C.H. Stirt. var. bituminosa essential oils, while the varieties Bituminaria bituminosa (L.) C.H. Stirt. var. crassiuscula P. Méndez, Fern. Galván & A. Santos and Bituminaria bituminosa (L.) C.H. Stirt. var. albomarginata P. Méndez, Fern. Galván & A. Santos are characterized by the presence of a high concentration of long-chain alcohols and of salicylic acid benzylic ester. In B. bituminosa var. albomarginata, we observed a different profile with predominance of a large concentration of alcohols as dodecanol and tetradecanol. The endemic B. morisiana can be identified for the predominant presence of farnesene. In methanolic fractions, we detected the presence of maltol, methyl citrate, methyl cumarate, santonin, and methyl linoleate. B. morisiana showed a low content of psoralens, and the accession of B. morisiana, from Siliqua indicated the presence of apocynin.     

一种大F数微透镜阵列的制备方法

针对大F数(大于10)微透镜阵列难以制备的现状,提出了一种制备大F数微透镜阵列的方法.首先采用传统光刻胶热熔法及刻蚀技术制作出成形的微透镜阵列,再将一层具有较高粘滞系数的光刻胶均匀地涂覆在该微透镜阵列上,在光刻胶的粘滞作用以及烘烤过程中光刻胶自身表面张力的共同作用下,微透镜阵列的F数得到提高.采用该方法制备的二氧化硅微透镜阵列的F数达40,与传统大F数微透镜阵列的加工方法相比,该方法简便易行、制备的微透镜阵列面形良好,且只需调节光刻胶的粘滞系数,即可获得F数不同的微透镜阵列.     

具有在线形貌矫正能力的组织体光学参数测量系统

针对具有复杂形貌的大面积组织体,基于空间频率域方法,提出并搭建了一种具有在线形貌矫正能力的绝对光学参数测量系统.首先利用相位轮廓术获取组织体三维表面轮廓,用余弦辐射公式法矫正由组织体表面复杂形貌引起的光照度的差异.然后,采用漫反射板代替传统方法中的参考仿体,基于空间频率域测量模式进行绝对光学参数测量,并利用提出的光学参数反演方法实现组织体吸收系数的重建.组织仿体实验结果表明,对于表面高度小于29mm的仿体,经矫正后,吸收系数的测量相对误差从60%下降到13%.     

放射性次级束流分离器真空系统的压力分布

放射性次级束流分离器是强流重离子加速器装置中,连接增强器和高精度环形谱仪的束流输运线,用于传输重离子束流以及放射性次级束流。为了满足束流传输的要求,并维持相连增强器和高精度环形谱仪的极高真空,放射性次级束流分离器真空系统的平均压强应低于5×10-7 Pa。因此,需要验证真空系统设计方案的可行性,以及设计方案能否满足要求的压强范围。通过现有的同步储存环CSRm中的真空计监测数据以及软件BOLIDE的模拟结果对比,对真空压力计算软件VAKTRAK的使用方法和计算结果进行验证;采用VAKTRAK模拟计算不同真空参数下（流导、出气率以及泵速）放射性次级束流分离器真空系统的压力分布。根据计算结果,放射性次级束流分离器真空系统的平均压强可以达到1.79×10-7 Pa （H₂）,满足物理实验和工程设计的要求。通过模拟计算结果,放射性次级束流分离器真空系统的设计方案的可行性得到验证,系统设计的真空度满足要求。HIAF Fragment Separator(HFRS) is connected with Booster Ring(BRing) and Spectrometer Ring (SRing) in the HIAF and used to transfer the ion beams and radioactive secondary beams. To satisfy the requirements of beam transmission and maintain the extremely high vacuum of BRing and SRing, the average pressure of HFRS vacuum system should be lower than 5×10-7 Pa. Therefore, the feasibility of the design scheme and whether the design scheme would fulfill the required vacuum range or not should be verified. Based on the measured data on the current sychrontron CSRm and the simulation results of BOLIDE, the calculation results of VAKTRAK are verified and then VAKTRAK is used to calculate the pressure profiles of different parameters(such as the conductance, out-gassing and pumping speed) for HFRS. According to the calculation results, the average pressure of HFRS vacuum system could be 1.79×10-7(H₂) which achieves the required pressure for physics experiments and engineering design. According the calculation results of this paper, the feasibility of the designed HFRS vacuum system has been verified and the design of system satisfies the vacuum requirements.     

一种应用于HIRFL-CSR上的非拦截式剩余气体电离束流剖面探测器(英文)

兰州重离子加速器冷却储存环主环（CSRm）上成功应用了一种剩余气体电离剖面探测器（IPM）,这种新型非拦截式剖面探测器的应用服役对CSRm的束流冷却研究及常规调束的实时剖面监测具有重要意义。IPM探测器通过收集束流与剩余气体之间的电离产物（气体离子或电子）,利用偏转静电场将电离产物加速至多重微通道板（MCP）,并在其上进行电子放大,放大的信号电子随后在荧光屏（P46等）上进行电子-光子转换,最终含有束流剖面信息的投影光子被真空靶室外的CCD相机获取。在正式应用于CSRm之前,IPM探测器还在分离扇回旋加速器直线（SSC Linac）上进行了束流实验,并与传统单丝扫描剖面探测器进行了对比。IPM探测器与单丝刮束器的剖面测量结果相近,并且具有较好的信噪比和约60 μm的较高空间分辨率。这种IPM探测器可以利用电阻串联进行均匀分压,较便捷地应用于真空度较低的直线加速器,还可以改造为分离电极单独供压的结构,应用在超高真空需要烘烤的环形加速器。最后还介绍了一种全新紧凑型结构的IPM探测器设计,该设计利用一套IPM探测器实现束流横向水平与垂直两个方向的剖面测量功能,这种紧凑型IPM结构尤其在空间紧缺型的强流直线加速器上具有重大的应用价值。A new non-intercepting beam profile monitor, residual gas Ionization Profile Monitor (IPM), has been developed and tested at the main Cooling Storage Ring of Heavy Ion Research Facility in Lanzhou (HIRFL-CSRm). It has been successfully used for studies of electron cooling mechanisms, as well as profile monitoring under normal-mode operation in HIRFL-CSRm. The IPM measures the distribution of ions resulting from the residual gas ionization during the beam passage. The gas ions are collected and multiplied by tandem-type MCPs and a phosphor screen, and eventually captured by a commercial CCD camera outside the vacuum chamber. Before formally applied in HIRFL-CSRm, the IPM was tested and compared with a conventional wire scanner profile monitor at Sector Separated Cyclotron Linac (SSC Linac). Both results show good agreement. Besides, the IPM has higher signal to noise ratio than the wire scanner. It also has a very high spatial resolution of around 60 μm. This monitor can be used for low vacuum like Linac with resistance for bias voltage, or for ultra-high vacuum with discrete electrodes for bias voltage where the bakeout process is essential. Furthermore, a novel and compact design of one IPM with capability of detecting both horizontal and vertical profile is proposed. This compact IPM is quite suitable for non-invasive profile diagnostics at space shortage and high-current Linac.     

平行板间超支化聚合物流体的密度分布和溶剂化力

在密度泛函理论(DFT)框架下,应用改进的基本度量理论(MFMT)和统计力学理论结合加权密度近似(WDA)分别表示硬球作用和聚合作用对自由能泛函的贡献,建立了描述ABg型超支化聚合物流体的化学势,得到了聚合物流体在平行板间的密度分布表达式,计算了聚合物流体在两平行板间的密度分布,并探讨了体积分数、反应程度和单体中B类官能团数对体系密度分布的影响.此外,通过体系密度分布,进一步分析了反应程度、板间宽度与溶剂化力的关系.     

Effects of ultraviolet radiation, temperature and moisture on aging of coatings and sealants - A chemical and rheological study

Photodegradation of polymeric materials leads to significant modifications in both chemical properties and mechanical-rheological behaviors over time. Thus, it is important to characterize both properties to gain a better understanding of the durability of the materials. In this contribution, the chemorheological tools based upon Fourier transform infrared (FTIR) spectroscopy and dynamic mechanical thermal analysis (DMTA) were used to study the effects of temperature and moisture on photodegradation of a model sealant/coating system based upon a styrene-butadiene-styrene triblock copolymer. Specimens were exposed coincidentally to ultraviolet-visible radiation between 295 nm and 600 nm, and one of four different combinations of temperature and relative humidity (RH), i.e., (a) 30 °C and <1% RH, (b) 30 °C and 80% RH, (c) 55 °C and <1% RH, and (d) 55 °C and 80% RH. The rate of photodegradation was examined in terms of formation of oxidation species and evolution of mechanical-rheological data, including glass transition temperatures, moduli, and the number of effective crosslinked butadiene chains per unit volume per exposure time. Environmental exposure resulted in similar degradation modes for all four environments but the rate of photodegradation was found to depend strongly on temperature. Conversely, the role of moisture on photodegradation was not significant. The study shows that chemical modification can be directly related to the corresponding rheological modifications. In addition, the relative stability of styrene and butadiene against photodegradation as a function of temperature and moisture was compared.     

Removal of Ar+ beam‐induced damaged layers from polyimide surfaces with argon gas cluster ion beams

An Ar Gas Cluster Ion Beam (GCIB) has been shown to remove previous Ar⁺ ion beam‐induced surface damage to a bulk polyimide (PI) film. After removal of the damaged layer with a GCIB sputter source, XPS measurements show minor changes to the carbon, nitrogen and oxygen atomic concentrations relative to the original elemental bulk concentrations. The GCIB sputter depth profiles showed that there is a linear relationship between the Ar⁺ ion beam voltage within the range from 0.5 to 4.0 keV and the dose of argon cluster ions required to remove the damaged layer. The rate of recovery of the original PI atomic composition as a function of GCIB sputtering is similar for carbon, nitrogen and oxygen, indicating that there was no preferential sputtering for these elements. The XPS chemical state analysis of the N 1s spectra after GCIB sputtering revealed a 17% damage ratio of altered nitrogen chemical state species. Further optimization of the GCIB sputtering conditions should lead to lower nitrogen damage ratios with the elemental concentrations closer to those of bulk PI. Copyright © 2010 John Wiley & Sons, Ltd.