电感耦合等离子体发射光谱法测定锌精矿中的铟

应用电感耦合等离子体发射光谱法测定锌精矿中的铟,确定了最佳工作条件,选择了最佳分析谱线,并利用标准加入法和基体匹配法验证了方法的准确性。样品用氟化氢铵、盐酸、硝酸、高氯酸溶样,用盐酸定容。结果表明,电感耦合等离子体发射光谱法与萃取分离盐酸羟胺示波极谱法测定的铟含量结果一致。方法准确,快速,加标回收率为99.6%～101.7%,相对标准偏差为0.97%～2.1%。     

用钐和四氯化钛体系一锅法合成咪唑烷衍生物

在四氢呋喃溶液中,用Sm/TiCl4体系还原亚胺合成了咪唑烷衍生物.发现当没有促进剂1,2-二溴乙烷时,咪唑烷衍生物的产率小于20%,加入1,2-二溴乙烷后,产率大大提高.产物的结构通过IR,1HNMR和MS光谱确证.根据实验结果提出了一个可能的反应机理.     

Rational synthesis of covalently bonded organic-inorganic hybrids

Hybrid materials based on covalently linked inorganic polyoxometalates (POMs) and organic species containing a delocalized pi system have drawn increasing attention. These hybrids, traditionally prepared by cluster assembly approaches that lack predictability and controllability, can now be synthesized through common organic reactions by using organically functionalized POM clusters as building blocks. This minireview highlights some of the most recent advances on a particular type of hybrids where the organic and inorganic components are connected by an imido linkage.     

二硫化钼基复合材料的合成及光催化降解与产氢特性

随着环境污染和能源短缺的加剧,无污染环境修复技术及清洁能源替代工程已成为一项重要而紧迫的任务。作为层状结构的过渡金属硫化物,二硫化钼带隙较窄,边缘具有高的反应活性,容易与其他物质形成复合结构,是近年来光催化环境修复及清洁能源领域的研究热点。本文详细介绍了半导体二硫化钼及其复合物的合成方法和光催化降解与产氢行为,重点阐述了二硫化钼及其复合物的具体复合方式、光催化降解污染物活性、光催化产氢活性以及具体的降解与产氢机理等方面的内容,并举例说明。二硫化钼及其复合物在光催化降解污染物和光催化产氢方面具有绿色、廉价、高效等优点,在环境修复及清洁能源领域具有巨大的潜力和应用发展前景。     

8-羟基喹啉-硅胶介质的合成及其在海水中痕量铅检测的应用

详细研究了以大孔硅胶为基质,一步合成8羟-基喹啉(8-HQ)型金属螯合色谱填料的方法,采用正交试验对合成方法进行了优化。与传统合成方法所得的填料进行了比较,从理化指标等方面来看,新的合成方法为佳。将该法用作微柱流动注射(FIA)在线分离、富集和电感耦合等离子体质谱(ICP-MS)分析流程中的固定相,对大洋海水中的痕量铅进行了在线分析,得到了较满意的结果。     

Thermal behaviour of hexanuclear titanium(IV) oxo isopropoxide carboxylates,and their usability as a single-source TiO2 CVD precursors

Hexanuclear oxo titanium(IV) isopropoxide carboxylates, of the general formula [Ti₆O₆(OPrⁱ)₆(O₂CR)₆] (R = Bu^t (1), CH₂Bu^t (2)) and [Ti₆O₆(OPrⁱ)₆(O₂CC(CH₃)₂Et)₆] · 0.5(C₇H₈) (3), have been synthesized as polycrystalline powders in order to study their thermal properties and usability as TiO₂ CVD precursors. Analysis of thermogravimetric and variable temperature (VT-IR) data shows that the thermal stability of the synthesized complexes decreases as follows 3 > 2 > 1. The composition of the vapors formed during the thermolysis of 1–3 were qualitatively analysed with VT-IR methods and mass spectrometry (MS-EI). According to obtained results, the decomposition of 1 and 2 proceeds with a partial decomposition and the formation of a volatile and stable titanium species, sufficient for their transport in vapors. The formation of volatile titanium-containing derivatives is an important factor that decides the application of 1 and 2 as precursors in CVD experiments. The high stability of 3 causes the thermal decomposition of this complex to be observed just above 573 K, and volatile titanium-containing derivatives were not detected in vapors. These results indicate that 3 could not be used as a precursor in CVD processes.     

The mechanical properties and tribological behavior of epoxy resin composites modified by different shape nanofillers

Mechanical properties and tribological behavior of epoxy resin (EP) and EP nanocomposites containing different shape nanofillers, such as spherical silica (SiO₂), layered organo‐modified montmorillonite (oMMT) and oMMT‐SiO₂ composites, were investigated. The SiO₂‐oMMT composites were prepared by in situ deposition method and coupling agent modification, and transmission electron microscopy (TEM) analysis shows that spherical SiO₂ is self‐assembled on the surface of oMMT, which forms a novel layered‐spherical nanostructure. The mechanical properties test results show that oMMT obviously improves the strength of EP and SiO₂ enhances its toughness, but oMMT‐SiO₂ exhibits a synergistic effect on toughening and reinforcing EP simultaneously. A pin‐on‐disc rig was used to test friction and wear loss of pure EP and EP nanocomposites. The tribological test results prove that these nanofillers with different shapes play different roles for improving the wear resistance of EP nanocomposites. Morphologies of the worn surfaces were studied further by scanning electron microscopy (SEM) observations, and it was clarified that the EP and EP nanocomposites undergo similar wear mechanisms. Copyright © 2006 John Wiley & Sons, Ltd.     

Incorporation of Fe3O4 Nanoparticles into Organometallic Coordination Polymers by Nanoparticle Surface Modification

Surface‐modified Fe ₃ O ₄ nanoparticles (NPs) can be obtained by substituting [(η⁵‐semiquinone)Mn(CO)₃] for oleylamine surface protecting groups. The resulting NP can function as a nucleus or template to generate crystalline coordination polymers that contain superparamagnetic Fe₃O₄ NPs. Hybridized magnetic properties can be obtained by introducing paramagnetic metal nodes, such as Mn²⁺, into the polymers (see picture).

     

延性单晶非均匀变形的三维有限元模拟

对延性单晶在拉伸载荷作用下的应变局域化和颈缩等非均匀变形过程进行了三维有限元数值模拟。将相关晶体塑性本构模型及一种新的数值积分方法补充到ABAQUS6.1商用有限元软件中。该方法的特点是，利用晶体塑性的动力学方程，获得一个关于晶体弹性变形梯度的演化方程，采用半隐式积分方案进行求解。本文推导出一种新的应力变本构矩阵。按此方式更新本构矩阵，计算速度和计算稳定性大大提高。加载方式，边界条件和变形程度等因素影响着滑移系的启动状况，这是平面模型所不能预测的。本文利用三维有限元方法模拟了不同取向下滑移系的启动状况，全面地考虑了FCC单晶材料12个可能滑移系在变形过程中的启动状况，合理地模拟了FCC面心立方单晶沿不同取向加载时晶轴旋转导致的应变局域化和颈缩等非均匀变形过程。