负载型复合半导体V2O5-TiO2/SiO2表面V2O5和TiO2的相互修饰作用

 采用表面改性法制备了负载型复合半导体材料V2O5-TiO2/SiO2,并用X射线衍射、比表面积测定、拉曼光谱、程序升温还原和紫外-可见漫反射光谱等技术对固体材料的结构和光响应性能进行了表征. 结果表明,V2O5和TiO2在负载型复合半导体V2O5-TiO2/SiO2表面有相互修饰的作用. 一方面,V2O5能扩展TiO2的光响应范围,使TiO2的吸光区域由紫外光区拓宽至可见光区,从而提高了复合半导体对光能的利用率; 另一方面,TiO2则有助于提高V2O5在载体表面的分散程度,抑制VOx的聚合,减小V2O5的微晶尺寸,提高固体材料的能隙值和氧化还原能力.     

紫外线预照射对TiO2上三氯乙烯气相光催化氧化反应的影响

 用紫外线照射法对TiO2光催化剂进行了预处理,并利用热重分析比较了预照射法和高温加热法对TiO2上三氯乙烯气相光催化氧化反应的影响. 结果表明,紫外线预照射可加快三氯乙烯的气相光催化反应. 这可能是紫外线预照射使TiO2 的表面状态和表面结构发生了变化,使催化剂表面活性基团羟基自由基的量增加所致.     

固体强酸催化剂Pd/WO3-ZrO2的制备及其对正庚烷异构化反应的催化性能

 采用共沉淀方法制备了固体酸载体WO3-ZrO2,考察了W含量和焙烧温度等对WO3-ZrO2酸性和物相结构的影响,并且考察了Pd/WO3-ZrO2催化剂对正庚烷异构化反应的催化性能. 结果表明,Pd/WO3-ZrO2催化剂的催化性能与固体强酸的W含量及晶相结构密切相关. 在w(W)=13.2%～15.8%时,经700～800 ℃焙烧,WO3在ZrO2表面达到单层分散,且大部分ZrO2以四方晶相存在,所制备的0.5%Pd/WO3-ZrO2对正庚烷异构化反应的催化活性可达到70.4%,选择性可达到81.0%.     

Pd/MoO3-TiO2/SiO2光催化CO2与C2H6合成烃类氧化物的反应性能

 采用化学反应改性和等体积浸渍法制备了负载型Pd/MoO3-TiO2/SiO2催化剂,并用IR,FT-Raman,TPD-MS,UV-Vis DRS和活性评价等方法研究了催化剂的表面结构、光吸收性能、化学吸附性能及光催化CO2与C2H6合成烃类氧化物的反应性能. 结果表明,SiO2负载的MoO3和TiO2之间存在着强相互作用,并能部分形成Mo-O-Ti键联,使得两种氧化物微粒均匀分布于载体表面; 表面MoO3和TiO2的复合作用使TiO2/SiO2的吸光带边红移,扩展了其吸光域,Pd的引入明显提高了固体材料的可见光吸收率; CO2和C2H6能较好地吸附在催化剂表面,在紫外光的激发下,CO2吸附态能解离生成CO,而C2H6单位吸附态能部分转化为C和H同时吸附在两个晶格氧上的双位吸附态; 光促CO2和C2H6反应主要生成丙醛、乙醇和乙醛; 在合适的条件下,烃类氧化物的选择性可超过90%.     

TiO2/SiO2/γ-Fe2O3-SiO2磁性光催化剂的制备与表征

 A γ-Fe2O3-SiO2 composite was prepared by sol-gel method followed by calcination at 700 ℃ for 30 min starting from tetraethoxysilane and iron nitrate. Upon further coating with SiO2 and TiO2, a TiO2/SiO2/γ-Fe2O3-SiO2 magnetic photocatalyst was obtained. XRD results show that Fe in the composite converts to the γ-Fe2O3 phase up to a processing temperature of 700 ℃, and further increase in temperature results in the formation of the α-Fe2O3 phase. The TiO2/SiO2/γ-Fe2O3-SiO2 samples obtained are monodisperse spherical particles with 200～250 nm diameter, well coated firstly by an amorphous SiO2 layer and then by an anatase TiO2 layer. The TiO2/SiO2/γ-Fe2O3-SiO2 particles retain their magnetic property well and show high activity for the photocatalytic degradation of salicylhydroxamic acid.     

The Incorporation of Titania into Modified Silicates for Solar Photodegradation of Aqueous Species

A new class of sol-gel-derived photocatalytic materials has been synthesized and used in solar-assisted photodegradation studies. The materials are comprised of a homogeneous dispersion of commercial TiO₂ powder into silica and organically modified silicate (Ormosil) hosts. The efficiency of the photocatalytic properties of these TiO₂-containing materials was determined by their relative performance in the solar photodecomposition of aqueous rhodamine B. The improved adsorption properties of the modified materials compared to commercial TiO₂ increase the photodecomposition rate and the buoyancy properties, although excess hydrophobicity decreases the wetted section of the catalyst and its photocatalytic performance. These materials can be used as floatable catalysts for solar-assisted water purification.     

A Shifted Double-Diamond Titania Scaffold

Photonic crystals are expected to be metamaterials because of their potential to control the propagation of light in the linear and nonlinear regimes. Biological single-network, triply periodic constant mean curvature surface structures are considered excellent candidates owing to their large complete band gap. However, the chemical construction of these relevant structures is rare and developing new structures from thermodynamically stable double-network self-organizing systems is challenging. Herein, we reveal that the shifted double-diamond titania scaffold can achieve a complete band gap. The largest (7.71 %) band gap is theoretically obtained by shifting 0.332 c with the dielectric contrast of titania (6.25). A titania scaffold with similar shifted double-diamond structure was fabricated using a reverse core–shell microphase-templating system with an amphiphilic diblock copolymer and a titania source in a mixture of tetrahydrofuran and water, which could result in a 2.05–3.78 % gap.     

Gold Nanoparticles Supported on Mesoporous Titania Thin Films with High Loading as a CO Oxidation Catalyst

In the present work, 2.4 nm gold nanoparticles (Au NPs) are uniformly dispersed on mesoporous titania thin films which are structurally tuned by controlling the calcination temperature. The gold content of the catalyst is as high as 27.8 wt %. To our knowledge, such a high loading of Au NPs with good dispersity has not been reported until now. Furthermore, the reaction rate of the gold particles is enhanced by one order of magnitude when supported on mesoporous titania compared to non‐porous titania. This significant improvement can be explained by an increase in the diffusivity of the substrate due to the presence of mesopores, the resistance to agglomeration, and improved oxygen activation.     

钢渣与污泥协同资源化研究进展

钢渣和污泥作为传统大宗固体废弃物,始终面临处理成本高、回收利用率低等问题,但其内部含有大量可利用物质,具有较高的资源化利用价值,现已成为国内外的研究热点。为了提高钢渣与污泥绿色、高效、协同资源化利用,综述了近年来国内外钢渣在建筑、道路、水处理、农业等领域资源化利用的研究进展,立足固废无害化、减量化,从钢渣和污泥的资源化进行分析与总结,指出不同研究方法的特点和优劣,为固废资源化利用提供参考。并基于我国发展现状对钢渣与污泥资源化利用的未来发展方向进行了展望,以期为固废处理行业的良性发展提供一定的理论支撑。