Direct transition of potential of water droplets to electric energy using aligned single-walled carbon nanotubes

In this paper, we report that an electromotive force (EMF) can be induced in a rope of aligned single-walled carbon nanotubes (SWNTs) when water droplets fall on this rope. The magnitude of this EMF depends sensitively on the slant angle of the SWNTs. Most interestingly, both the magnitude and the direction of the induced EFM can be modulated by applying a current to the SWNTs. The concepts of electrical slip and no-slip are proposed and can be quantitatively described by ``electrical slip resistance'. This kind of generator does not need any magnet, rotor, {etc} and shows quite a different operating mechanism and design compared with a conventional large scale hydroelectric power generator.     

A study on photo-generated charges property in highly ordered TiO2 nanotube arrays

In this study TiO₂ nanotube arrays were fabricated by potentiostatic anodization of titanium sheet. The X-ray diffraction (XRD) pattern and field emission scanning electron microscopy (FE-SEM) image indicated the TiO₂ nanotube arrays were of pure anatase form and highly ordered. The properties of the photo-generated charges in the nanotube arrays were investigated by transient photovoltage (TPV) technique and surface photovoltage (SPV) technique based on lock-in amplifier with dc bias, in comparison with the commercial powder derived film. The separation processes of the photo-induced charges in the system of TiO₂ nanotubes on Ti have been demonstrated to be correlated with the incident light intensity, surface trapping states, and the interfacial electric field between Ti and TiO₂. The results also show that the highly ordered nanotube film could generate much stronger SPV responses under external electric field than the commercial powder derived film.     

基于铟锡氧化物/Ti复合电极的高亮度碳纳米管场致发射冷阴极

通过制作亲碳性铟锡氧化物(ITO)/Ti复合电极,改善移植型碳纳米管(CNT)冷阴极的导电电极与CNT膜层之间附着性能,从而消除CNT与电极间的界面势垒和非欧姆接触对CNT阴极场发射均匀性和稳定性的影响.采用磁控溅射技术和丝网印刷工艺制作了ITO/Ti基CNT阴极.用X射线衍射仪和场致发射扫描电子显微镜表征CNT阴极结构,结果显示热处理后的ITO/Ti基CNT阴极中可能有TiC相生成,从而使得导电电极与CNT形成有中间物的强作用体系.该体系降低甚至消除电极与CNT之间的界面势垒,增加了CNT与电极间形成欧姆接触的概率.用四探针技术分析电阻率,结果表明ITO/Ti复合电极具有电阻并联效果,CNT阴极导电性能提高.场致发射特性测试表明ITO/Ti基CNT阴极的场致发射电流达到384μA/cm2,较普通ITO基CNT阴极的场致发射电流有显著提高,能够激发测试阳极发出均匀、稳定的高亮度荧光.制作ITO/Ti复合电极是实现场致发射稳定、均匀的低功耗CNT阴极的有效途径.     

氮掺杂及水分子吸附碳纳米管电子场发射第一性原理研究

对闭口碳纳米管(CNT)顶端分层掺氮及吸附不同数目水分子体系,运用第一性原理研究了有电场存在时的电子场发射性能.结果表明：掺氮并吸附水分子的CNT结构稳定;外电场愈强、水分子数愈多,体系态密度(DOS)向低能端移动幅度愈大且最高分子占据轨道(HOMO)/最低分子空轨道(LUMO)能隙愈小.吸附能,DOS/LDOS,HOMO/LUMO及其能隙分析一致表明,第三层氮掺杂CNT吸附不同数目水分子体系的场发射性能最佳. 关键词： 氮掺杂 水吸附 密度泛函理论 电子场发射     

微弧等离子喷涂碳纳米管/纳米Al2O3-TiO2复合涂层的吸波性能研究

将碳纳米管与纳米Al₂O₃-TiO₂陶瓷粉末超声共混制备了碳纳米管/纳米Al₂O₃-TiO₂复合粉末,测试了复合粉末在2—18GHz波段的电磁参数.研究表明：随着碳纳米管质量分数的增加,碳纳米管/纳米Al₂O₃-TiO₂复合粉末的复介电常数和损耗角不断增大.当碳纳米管质量分数和厚度增加时,复合粉末对电磁波的反射率峰值先增加后减小,而谐振频率不断向低频移动.采用微弧等离子喷涂制备了7wt%碳纳米管/纳米Al₂O₃-TiO₂复合吸波涂层,当厚度为1.5mm时,涂层最小反射率为-24.0dB,当厚度为2.0mm时,涂层小于-10dB的频带宽为3.60GHz,当温度为500℃高温时,1.0mm厚的涂层最小高温反射率为-12.2dB,小于-10dB频带宽为2.0GHz.复合涂层的实际厚度D与理论厚度d呈线关系：d=0.898D+0.515. 关键词： 等离子喷涂 碳纳米管 2O₃-TiO₂')" href="#">纳米Al₂O₃-TiO₂ 吸波性能     

填充碳纳米管/石墨的复合型电磁波屏蔽膜

介绍一种填充碳纳米管／石墨的复合型电磁波屏蔽膜的组成、制备及其对耐老化性能,实验发现：当碳纳米管／石墨的配比为1／7－1／2、有机聚合物／导电填料的配比为29．6／70．4－32．4／67．6时,该屏蔽具有最佳的电性能、屏蔽性能和加工性能,且在一定条件下具有负的温度系数。用多层结构模型讨论了该屏蔽膜的导电性,并与铜、镍、危险性膜的屏蔽特性进行了比较。     

平栅极结构碳纳米管场发射性能实验

研究了碳纳米管(CNT)场发射显示器(FED)三电极结构的平栅极结构,得到了进一步降低场致发射的开启电压和缩小动态调制电压范围的方法,同时也为相关的场发射安全操作提供了借鉴。实验表明:二极结构场发射调制电压范围较大,调制电压达上千伏,而在三电极的平栅极结构中通过调节阳极电压不仅可控制显示亮度,还对栅极调制电路有保护作用。适当升高阳极电压、适当缩短阴极和阳极之间的距离以及阴栅极经老化后可减小栅极调制电压, 同时还能有效的降低场致发射的动态调制电压的范围。这对新一代的显示器研制提供帮助。     

双金属/TiO2纳米管复合结构中增强的光电流

将传统半导体材料与金属微纳结构相结合,利用其表面等离激元共振效应,可有效地增强复合结构的光电转换效率,使其广泛地被用于光电化学和光电探测等领域.本文以氧化铝纳米管为模板,采用原子层沉积技术制备出高有序的TiO2纳米管,并通过电子束热蒸发技术在大孔径的纳米管薄膜中分别负载金、铝和双金属金/铝纳米颗粒,形成金属纳米颗粒/T...     

碳纳米颗粒的放射性99mTc标记

探索了影响氯化亚锡还原法制备碳纳米管和不同粒径纳米碳黑的99mTc标记化合物的多种因素, 在给定实验条件下, 99mTc的标记率能够稳定达到90％以上。 细胞培养液中标记物的放射化学纯度在2.5 h中保持在(86±4)%范围内。 制备的标记化合物满足碳纳米颗粒细胞摄取率测定和细胞毒性机制研究的实验要求。 实验结果提示, 99mTc标记过程是基于还原得到的低价Tc在碳纳米颗粒表面上的物理吸附机理。 The effects of experimental conditions on preparation of 99mTc labeled carbon nanotubes and nanocarbon blacks by SnCl2 were investigated. At given conditions the labeling yields were over 90%. In a culture medium, the radiochemical purity of the labeling compounds kept (86±4)% within 2.5 h. The 99mTc labeled multi walled carbon nanotubes (MWNTs) and nanocarbon blackes (NCBs) obtained in this work met satisfactory experimental demands for study of cellular uptake and toxicity. The experiments showed that the labeling process was based on physical adsorption of low valent technetium resulted from reduction reaction on the surface of the carbon nanomaterials.     

碳纳米管的变温场发射

考察了温度变化对沉积在钨丝针尖上的碳纳米管场发射的影响，发现碳纳米管场发射电流随温度升高而增大，场发射电流的稳定性基本没有变化. 多根碳纳米管的场发射特性随温度变化出现偏离Fowler-Nordheim理论的现象，这种现象可能来自碳纳米管的不均匀性.