多思路巧妙测量阻尼常数及计时仪器的开发

本文从物理实验测量和计时仪器开发两个方面同时入手,从运动学角度出发,分别选用U形和条形遮光片,且灵活利用通用计数器的各个功能,综合提炼出7种实验方案测量阻尼常数,其测量值在1.31～1.53之间,实验结果重复性和一致性较好.同时开发新的计时仪器,直接应用于本实验,使测量过程变得简单易行.     

Copula理论在复合期权定价中的应用

本文使用风险中性评价方法分三部分计算了复合期权的价值,针对需要计算联合分布的第二部分,通过选取边缘分布为GARCH模型的二元正态Copula模型进行推理验证,结果求得的联合分布与使用风险中性评价方法的计算结果一致.进一步计算得到了时间相依的复合期权的价值,并且给出了使用Bayes时序诊断法和Z检验来诊断期权定价时其出现价格大的波动时的局部拐点的方法.     

Investigations on Timing Jitter by Chirp Selection of External Modulator in Return-to-Zero Optical Soliton Pulse Transmission at 10 Gb/s

Abstract

We investigate the chirp selection of externally modulated return-to-zero soliton pulse at 10 Gb/s for fiber optical communication system for the reduction in timing jitter. The chirp range (?5 to +5), as well as the effect of the post compensation, have been examined up to ten regenerated fiber spans in the link. Here, it is shown that the chirp value of the external modulator should be set to either 0 or ?1 to reduce timing jitter. Moreover, for more number of spans, it will be better to adopt other chirp values.     

A dexterous feature selection artificial immune system algorithm for keystroke dynamics

The main problem in security protecting the computer or resources from intruders. The password and username are the most common means to provide security. But this method has many loop holes such as password sharing, shoulder surfing, brute-force attack, dictionary attack, guessing, and many more. Keystroke dynamics is one popular and inexpensive behavioral biometric technology, which identifies the authenticity of a user when the user is working via a keyboard. Keystroke features like dwell time and flight time of every user are evaluated in this paper by preprocessing techniques such as Hausdroff timing, mean, median, and standard deviation. The artificial immune system is used for feature selection, and comparison between preprocessing techniques is shown.     

智能型高速CCD相机的时序电路的研制

首先详细地介绍了几种传统时序电路的实现方法与各自存在的优缺点 ,然后对 isp L SI器件的性能特点以及 TDI- CCD相机的组成结构、工作原理进行了简要地阐述 ,最后对采用 isp L SI器件实现 CCD相机时序电路的全过程进行了全面、细致地分析。本文结合实际课题 ,已由在线可编程大规模逻辑器件实现了高速 TDI- CCD相机的时序电路。此相机系统具有一些重要参数 (行周期、TDI级数、视频信号的增益、偏置参数 ) ,并可以灵活控制。同时该系统又具有高可靠性、高稳定性、低功耗等特点。     

Synchronous vibration parameters identification by tip timing measurements

The Blade Tip Timing (BTT) measurement system is a technique to measure vibration parameters of a rotating bladed disk. In particular for synchronous vibrations the BTT provides signals versus the rotation speed of the disk starting from the measurement of the time of arrival (TOA) of each blade under the tip timing probes. The signals must be post processed in order to obtain the interesting parameters of each blade vibration. The paper presents a method to extract the main parameters (amplitude and frequency) in resonance condition from the tip timing measurements. The proposed method is a revision of the already existing well known Two-Parameter Plot (2PP) method which requires a minimum of two probes. Improvements to the existing 2PP method are here suggested mainly in the part of engine order identification.The proposed method is then applied to the BTT measured signals coming from a rotating bladed disk excited at different engine orders. At the same time on the disk the vibration of one blade was detected by strain gauges. The strain gauges were calibrated and they provide the reference values of the vibration parameters. The vibration parameters derived by the proposed method are in agreement with those obtained by the strain gauges methodology.     

OJ287: Post-Newtonian Calculation in Harmonic Coordinate and Pulsar Timing Residual Confirmation

We calculate and discuss the motion of the binary black hole OJ287 based on Post-Newtonian approximation in a harmonic coordinate. With gravitational waveform obtained, theoretical timing residual of PSR B1855+09 induced by gravitational radiation of OJ287 is presented and compared with observed data, further shows that hypothesis referring to OJ287 as a binary BH system might be proper. The energy flux of gravitational radiation from binary is also provided, from which we find that the flux changes sign successively: ?_N >0, ?_1PN <0, ?_2PN >0, in agreement with the relative signs of forces of each PN order, revealed in the previous work.     

Study on autonomous navigation based on pulsar timing model

The basic principle of pulsar timing model was introduced, and the general relativistic corrections were analyzed when pulse time of arrival (TOA) was transferred to coordinate TOA at the Solar System Barycentre. Based on the shifting, an iterative method of autonomous position determination for spacecraft was developed. Accordingly, the linear form of the position offset equation was evolved. Using the initial estimated value of spacecraft’s position as the input of pulsar timing equation, through calculation of the offset between measured or transferred and predicted TOA, the position offset can be solved by Least Squares. At last, the main error sources including modeling error and parameters error were discussed. Supported by the National Defence Laboratory Foundation of China (Grant No. 9140C3601010901) and Science Foundation of Shaanxi Province (Grant No. 2007F12) and the Technology Specialism Foundation of Shaanxi Education Department of Shaanxi Province (Grant No. 07JK332), and the Innovative Research Plan of Xi’an University of Technology (Grant No. 105-210714)     

Performance testing of a long-strip two-end readout multi-gap resistive plate chamber

Multi-gap Resistive Plate Chamber （MRPC） is a new generation of gas detector with good timing and spacial resolution, whose technique is widely applied in some recent high energy （nuclear） physics experiments. In this letter, we report a long-strip two-end readout MRPC and its test beam performance. The measurements show that the long-strip performs a transmission line characteristic and the impedance is independent of the length of strip. The MRPC module we developed is presented to gain a timing resolution of -80 ps and a spacial resolution of -6.4 mm. The possible application of the MRPC is also discussed.     

基于GPS和短波的高精度时钟系统研究与设计

介绍了全球定位系统GPS、短波授时技术;在对高稳恒温晶振及其频率特性进行分析的基础上,设计了一种基于GPS卫星、短波无线电授时的高精度时钟系统;系统通过利用GPS接收处理模块、短波授时接收模块得到的秒脉冲信号、时间信息,经过信号检测,时延修正处理、性能优选,脉冲数量统计、脉冲滤波与卡尔曼算法处理、PWM脉冲调压控制,实现对高稳恒温晶振频率的校准,获得一个短期及长期频率准确度都比较优良的时间频率标准,同时利用校频后恒温晶振分频出的1 pps信号对RTC时间芯片进行校准,对外输出高精度时间信息;对恒温晶振校频系统的基本工作原理及关键技术进行了详细说明,试验结果表明,在时间不长于1 h内,频率准确度优于0.9*10-9;该系统实用方便,达到了将恒温晶振校准到较高指标的目的。