The Effect of Selenium Supplementation on the NMR Proton Relaxation Time T1 in Plasma

Selenium has been identified as an essential dietary trace e1ementQ)which is a component of glutathione peroxidase (GSH-Px)(₂)and a cytochrome C-like protein(₃), The enzyme,the four subunits of which each contain one atom of selenium in the form of selenocysteine, the selenium containing active centre being amenable to chemical modification, catalyses the reduction of H,O,and organic hydroperoxides to water.In this way GSH-Px plays an important role in the protection of the cell from oxidative stresses such as the superoxide anion,organic hydroperoxides and H₂O₂     

Ultrasound-assisted extraction of phenolic compounds from Laurus nobilis L. and their antioxidant activity

Bay leaves (BL) (Laurus nobilis L., Family: Laureceae) are traditionally used to treat some symptoms of gastrointestinal problems, such as epigastric bloating, impaired digestion, eructing and flatulence. These biological properties are mainly attributed to its phenolic compounds. In this paper, ultrasound-assisted extraction of phenolic compounds from Laurus nobilis L. (Laureceae) was studied.Effects of several experimental factors, such as sonication time, solid/liquid ratio and concentration of solvent on extraction of phenolic compounds were evaluated through a randomized complete block design with factorial treatment arrangement (3³). The best extraction conditions were: 1 g plant sample with 12 mL of 35% ethanol, for 40 min, obtaining a yield of phenolic compounds of 17.32 ± 1.52 mg g^?1 of plant. In addition, free radical-scavenging potential of DPPH and lipid oxidation inhibition, by linoleic acid peroxidation of the selected extract was measured in order to evidence their antioxidant properties. Results indicated that high amounts of phenolic compounds can be extracted from L. nobilis by ultrasound-assisted extraction technology.     

γ-irradiation effect on the spectroscopic and electrical properties of K2SO4—Na2SO4 mixed system

Abstract

Measurements of electron paramagnetic resonance, infrared and electrical properties were carried out for the K₂SO₄—Na₂SO₄ mixed system before and after γ-irradiation. EPR measurements revealed the presence of a quartet of lines characterized by an isotropic g-value of 2.0034. These lines are mainly attributed to the formation of a SO^? ₃ center which results from the interaction of γ-rays with the sulfate ion. A decrease in the absorption intensity of the Infrared radiation was observed after γ-irradiation due to radiation damage in the sulfate group. The electrical conductivity, σ, was measured for the K₂SO₄—Na₂SO₄ system before and after γ-irradiation in the temperature range from 30 up to 430°C. A considerable decrease in the conductivity value accompanied by an increase in the activation energy was observed after γ-irradiation. The energy of formation of Frenkel defects was estimated to be 2.94eV. The current-voltage characteristics were measured at different temperatures in order to estimate the type of conduction in the samples. Isothermal annealing kinetics was investigated at different temperatures before and after γ-irradiation. The electrical conductivity decreases with increasing time of annealing and the annealing process is dominated by a unique rate process.     

ESR response of gamma-irradiated sulfamethazine

In the present work, characteristic features of the radiolytical intermediates produced in gamma-irradiated solid sulfamethazine (SMH) were investigated by electron spin resonance (ESR) spectroscopy. The heights of the resonance peaks, measured with respect to the spectrum baseline, were used to monitor microwave saturation, temperature and time-dependent kinetic features of the radical species contributing to the formation of recorded experimental ESR spectra. Three species having different spectroscopic and kinetic features were observed to be produced in gamma-irradiated SMH. SO₂, which is the most sensitive group of radiation in the SMH molecule, was found to be at the origin of radiation-produced ionic radical species. Based on the experimental results derived from the present study, the applicability of ESR spectroscopy to radiosterilization of SMH was discussed. In the dose range of interest (0.5–10 kGy), the radiation yield of solid SMH was calculated to be very low (G=0.45) compared with those obtained for sulfonamide aqueous solutions (G=3.5–5.1). Based on these findings, it was concluded that SMH and SMH-containing drugs could be safely sterilized by gamma radiation and that ESR spectroscopy could be successfully used as a potential technique for monitoring their radiosterilization.     

A normalised residence time transport equation for the numerical simulation of combustion with high-temperature air

This study concerns the numerical simulation of turbulent non-premixed combustion in highly preheated air streams. One of the objectives is to settle an efficient computational procedure to proceed with the numerical simulation of large-scale industrial devices. It is also expected that the availability of such a computational framework may facilitate comprehensive sensitivity analyses as well as the development of mathematical models able to represent turbulence-chemistry interactions (TCI) in such conditions. Based on the salient physical ingredients that characterise scalar mixing, propagation, and self-ignition processes, a turbulent combustion modelling framework is thus introduced and applied to the numerical simulation of well-documented laboratory flames. In the corresponding geometries, the bulk flow velocities of the reactants streams can reach rather large values, which lead the flame to lift from the burner rim. Partially premixed flame edges thus stabilise the whole flame structure and the temperature of the oxidising stream can be increased by vitiation with burned gases so as to promote the corresponding flame-stabilisation processes. For sufficiently large values of the vitiated airstream temperature, self-ignition mechanisms may be triggered thus leading to a competition between mixing, propagation, and ignition processes. In this context, the ratio of the residence time to the self-ignition delay is thought to be a relevant variable to delineate the possible influence of ignition phenomena. Therefore, a modelled transport equation for this normalised residence time is considered. The performance of the corresponding modelling proposal is analysed with special emphasis placed on its ability to reproduce ‘memory’ or ‘lagrangian’ effects related to thermal aging processes. In this respect, it is noteworthy that the present set of computations makes use of tabulated quantities associated to (i) steady laminar one-dimensional diffusion flamelets, so as to describe the composition of combustion products, (ii) steady laminar one-dimensional premixed flamelets, to describe the flame brush propagation, and (iii) temporal evolution of zero-dimensional homogeneous mixtures to account for the possible occurrence of self-ignition phenomena. In particular, the tabulated self-ignition time value is used to evaluate the increase in the normalised residence time. Finally, two modelling parameters are put into evidence and studied through a detailed sensitivity analysis.     

Acquisition Time for Ground-to-Satellite Optical Communication System in Weak Atmospheric Turbulence with Spatial Diversity

Abstract

In this article, various issues involved in a ground-to-satellite optical communication link (i.e., acquisition time, uncertainty area, and channel noise) are discussed. Acquisition time of a free-space optical link is evaluated for coherent (sub-carrier BPSK and QPSK) and non-coherent (OOK and -PPM) modulation schemes over weak turbulent channel with transmit diversity. In the analysis, both uncorrelated and correlated beams are considered. It is seen that an increase in transmit diversity order helps to improve the acquisition time, irrespective of turbulence strength in the atmosphere. At high correlation, a marginal change in acquisition time is observed with the increase in diversity order.     

Mass Spectrometry,Review of the Basics: Electrospray,MALDI, and Commonly Used Mass Analyzers

Abstract

Mass spectrometry (MS) has progressed to become a powerful analytical tool for both quantitative and qualitative applications. The first mass spectrometer was constructed in 1912 and since then it has developed from only analyzing small inorganic molecules to biological macromolecules, practically with no mass limitations. Proteomics research, in particular, increasingly depends on MS technologies. The ability of mass spectrometry analyzing proteins and other biological extracts is due to the advances gained through the development of soft ionization techniques such as electrospray ionization (ESI) and matrix-assisted laser desorption ionization (MALDI) that can transform biomolecules into ions. ESI can efficiently be interfaced with separation techniques enhancing its role in the life and health sciences. MALDI, however, has the advantage of producing singly charges ions of peptides and proteins, minimizing spectral complexity. Regardless of the ionization source, the sensitivity of a mass spectrometer is related to the mass analyzer where ion separation occurs. Both quadrupole and time of flight (ToF) mass analyzers are commonly used and they can be configured together as QToF tandem mass spectrometric instruments. Tandem mass spectrometry (MS/MS), as the name indicates, is the result of performing two or more sequential separations of ions usually coupling two or more mass analyzers. Coupling a quadrupole and time of flight resulted in the production of high-resolution mass spectrometers (i.e., Q-ToF). This article will historically introduce mass spectrometry and summarizes the advantages and disadvantages of ESI and MALDI along with quadrupole and ToF mass analyzers, including the technical marriage between the two analyzers. This article is educational in nature and intended for graduate students and senior biochemistry students as well as chemists and biochemists who are not familiar with mass spectrometry and would like to learn the basics; it is not intended for mass spectrometry experts.     

Copper Defects and Conductivity in Bi—Pb—Sr—Ca—Cu—O Glasses

Glass ceramics of the composition (Bi_0.8Pb_0.2)₄Sr₃Ca₃Cu₄O₈ prepared by the melt quenching technique and the crystalline phases produced by the rapid thermal annealing have been studied by electrical resistivity and electron paramagnetic resonance (EPR) measurements in the temperature range from liquid helium up to room temperature. The concentration of the EPR active Cu^2? paramagnetic centers decreases as conductivity increases for the glass ceramics and disappears after crystallization and the growth of superconducting phases, similar to bulk high-T_c superconductors. The KPR spectra of both glass and crystallized ceramics after short-time annealing indicate the coexistence of Cu^2? paramagnetic ions and the exchange coupled clusters.     

Conductivity anomalies in Y–Ba–Cu–O at 40K and 100K under high quasihydrostatic pressures

Electrical resistance measurements at low temperatures and high quasihydrostatic pressures on superconducting and non-superconducting varieties of Y_0.8Ba_1.2Cu₂O₅ (obtained by annealing in oxygen and air respectively) show striking anomalies in the vicinity of 100K and 40K. Arguments are presented to show that these anomalies as also the occurrence of T 's in the oxide superconductors either in the vicinity of 100K or of 40K are connected with their layered structure containing planes of Cu-O otahedral complexes.