语音清晰度和平均混响时间在车内声学中的应用

乘用车的车内声学性能直接影响人的主观感受,但仅靠主观评价来判定是不够的;必须通过引入有力的客观参量来刻画车内听觉的舒适度效果。而如何来设计车内噪声试验方案来诊断和改善声学水平则成了一个重要的环节。在乘用车车内噪声品质的开发过程中,综合应用语音清晰度和平均混响时间两个指标对车内吸声性能进行了对比分析。通过对实车主观评价和客观测试,讨论了语音清晰度、车内平均混响时间、吸声系数和声压衰减斜率的概念及相互关系,从而确定了高速道路行驶工况下的语音清晰度主要取决于车内吸声材料的性能。提出了将车内相关部位进行材料吸声改进作为改善语音清晰度的主要措施之一。     

前后光栅周期对于双光栅结构薄膜太阳能电池光俘获效应的影响

本文用时域有限差分法对硅层等效厚度为100 nm的具有不同前后光栅周期的介质/金属双光栅结构薄膜太阳能电池进行了模拟分析,比较了三角形最佳相同与不同周期光栅结构的吸收光谱特性,分析了光栅高度、填充比、硅吸收层厚度对最佳相同和不同周期光栅结构光吸收特性的影响,以及相应结构中导致光吸收增强的共振模式.结果表明前后光栅周期为1:1的共形双光栅结构中存在光泄漏现象,偏离1:1后的光栅结构可有效地抑制低级次衍射光的泄漏,前光栅周期小于后光栅周期的结构光吸收性能的提高来自于平面波导模式在吸收层中的有效激发和传播,而前光栅周期大于后光栅周期的结构光吸收性能的提高则来自于后光栅界面上所激发的等离子体极化模式.在较厚的硅吸收层厚度,前后光栅周期比为1:2和1:3的电池结构也会出现光泄漏现象,从而使具有最大光吸收效率的结构偏离这些周期比结构的位置.     

石墨烯的声子热学性质研究

声子是石墨烯导热过程中的主要载体,而声子的弛豫时间又是其中最基本、最重要的物理量.本文采用简正模式分解法研究了石墨烯声子的弛豫时间,并且借此分析了不同声子在导热过程中的贡献.该方法通过平衡分子动力学模拟实现,首先通过模拟得到单个声子的能量自相关函数衰减曲线,并进一步采用拟合和积分两种方法得到单个声子的弛豫时间.然后,研究了弛豫时间与波矢、频率和温度的关系.结果发现,弛豫时间随波矢的变化与对应的色散关系相近,弛豫时间与频率和温度的关系符合理论模型:1/τ=νnTm,其中声学支的n为1.56,而光学支结果较为发散,指数m对于不同声子支结果略有不同.最后,还研究了不同频率声子对导热的贡献,发现低频声子在态密度上占有绝对优势,并且其弛豫时间整体高于高频声子,所以低频声子对导热的贡献占据主导地位.     

Searching for new physics in D^0→μ^＋ μ^-,e^＋e^-,μ^±e at BES and/or the super charm-tau factory

In contrast with B0-ˉB0, Bs-ˉBs mixing where the standard model（SM） contributions overwhelm that of the new physics beyond standard model（BSM）, a measured relatively large D0-ˉD0mixing where the SM contribution is negligible, definitely implies the existence of the new physics BSM. It is natural to consider that the rare decays of D meson might be more sensitive to new physics, and the decay mode D0→μ＋μ-could be an ideal area to search for new physics because it is a flavor changing process. In this work we look for a trace of the new physics BSM in the leptonic decays of D0. Concretely we discuss the contributions of unparticle or an extra gauge boson Z while imposing the constraints set by fitting the D0-ˉD0mixing data. We find that the long-distance SM effects for D0→lˉl still exceed those contributions of the BSM under consideration, but for a double-flavor changing process such as D0→μ±e, the new physics contribution would be significant.     

Measuring the solidification time of silicone rubber using optical inspection technology

A room temperature vulcanization silicone rubber was widely used as the mold making material due to its high elasticity, good heat-resistance and low surface energy. To enhance the efficiency of making the silicone rubber mold, accurately measuring the solidification time is an important issue. This study demonstrated a non-invasive measurement system to measure the solidification time of silicone rubber. The solidification time can be determined rapidly from the thickness of silicone rubber according to the predicted equation. The maximum relative error of the predicted equation is about 8.26%. The temperature rise of the silicone during the solidification process is an important phenomenon to determine the solidification behavior of silicone rubber. The solidification mechanism of silicone rubber mold is demonstrated.     

基于主动式时间反转镜的声呐目标强度测量研究

为提高目标强度测量过程中的抗噪声、混响以及浅海多途干扰性能,从军标文件中的目标强度测量方法以及主动式时间反转镜的基本原理出发,经过研究和推演,发现可将基于单阵元的主动式时间反转镜与相关器结合应用于目标强度测量过程,提出了一种新的目标强度测量方法。该方法利用了主动式时间反转镜的抗多途特性,使得测量具有抗多途的性能;利用噪声与信号的不相关特性,算法结合相关器起到了很好的抗随机噪声效果;混响中的体积混响是随机的,算法具有抗体积混响的性能。论文分别从理论仿真和水池实验验证了算法的有效性和正确性。     

Spontaneous excitation of a circularly accelerated atom coupled with vacuum Dirac field fluctuations

We study the spontaneous excitation of a circularly accelerated atom coupled with vacuum Dirac field fluctuations by separately calculating the contribution to the excitation rate of vacuum fluctuations and a cross term which involves both vacuum fluctuations and radiation reaction, and demonstrate that although the spontaneous excitation for the atom in its ground state would occur in vacuum, such atoms in circular motion do not perceive a pure thermal radiation as their counterparts in linear acceleration do since the transition rates of the atom do not contain the Planckian factor characterizing a thermal bath. We also find that the contribution of the cross term that plays the same role as that of radiation reaction in the scalar and electromagnetic fields cases differs for atoms in circular motion from those in linear acceleration. This suggests that the conclusion drawn for atoms coupled with the scalar and electromagnetic fields that the contribution of radiation reaction to the mean rate of change of atomic energy does not vary as the trajectory of the atom changes from linear acceleration to circular motion is not a general trait that applies to the Dirac field where the role of radiation reaction is played by the cross term.     

Regenerative queueing processes and their qualitative and quantitative analysis

Recently developed methods of qualitative analysis for regenerative processes arising in queueing are presented. These methods are essentially qualitative and use notions such as coupling, probability metrics, etc. They are developed for studying various properties of regenerative models, including convergence rate to a stationary regime, continuity of their characteristics with respect to some parameters and first-occurrence time of an event such as queue overflowing. In spite of their qualitative nature they lead to good quantitative estimates of underlying properties with computer methods available to calculate them.     

A survey of retrial queues

We present a survey of the main results and methods of the theory of retrial queues, concentrating on Markovian single and multi-channel systems. For the single channel case we consider the main model as well as models with batch arrivals, multiclasses, customer impatience, double connection, control devices, two-way communication and buffer. The stochastic processes arising from these models are considered in the stationary as well as the nonstationary regime. For multi-channel queues we survey numerical investigations of stationary distributions, limit theorems for high and low retrial intensities and heavy and light traffic behaviour.