以太阳为光源测量大气污染物研究中精确跟踪太阳的方法

本文给出了通过计算太阳在天空中移动的轨迹和利用在实验中所采集到的太阳光谱主动精确跟踪太阳的方法,并且通过在以太阳为光源测量大气中污染物浓度的实验研究中的实际应用,证明了该方法的可靠性和实用性.     

Simultaneous Measurement of Individual ATPase and Mechanical Reactions by a Single Myosin Molecule at Work

Based on techniques for single molecule imaging and nanomanipulation by optical tweezers, we have developed a new technique that allows simultaneous measurement of individual ATPase and mechanical reactions from a single myosin molecule during force generation. We show how the ATPase reaction couples to the mechanical reaction directly at the single molecule level. The results show that the myosin head can produce force even after releasing the bound nucleotide, probably ADP, suggesting that the chemical energy driven by ATP hydrolysis can be hysteretically stored in the myosin molecule. This view does not support a widely accepted hypothesis in which the force generation is tightly coupled to ligand dissociation.This paper was originally presented as an invited paper at the seventh Meeting on Near Field Optics, which was held on July 1, 1998 at Nagoya University, Nagoya, organized by the Research Group on Near Field Optics of the Optical Society of Japan, an affiliate of the Japan Society of Applied Physics.     

Escape over Fluctuating Barrier for a Stochastic Model of Motor Proteins in the Case of Environmental Perturbation

We study the mean first passage time (MFPT) over the fluctuatingpotential barrier for a stochastic model of motor proteins in the case of environmental perturbation proposed by J.H. LI et al. [Phys. Rev. E57 (1998) 39171. The MFPT is derived for a particle over the fluctuating potential barrier. It is shown that (i) there is resonant activation for the MFPT as a function of the flipping rate of the fluctuating potential barrier; (ii) the additive and multiplicative noises can weaken the resonant activation, but the correlations between them enhance the resonant activation; (iii) the susceptibility of the resonant activation to the multiplicative noise is far larger than that to the additive noise.     

压电超声电机的非线性动力学研究进展

压电超声电机 (ultrasonic motor, USM) 是一个具有闭环控制的机电耦合强非线性系统,在大功率情况下,会表现出明显的非线性现象．其非线性因素主要表现为: (1) 定子与动子之间的接触非线性; (2) 定子材料非线性; (3) 温度、磨损等因素引起的缓变因素; (4) 驱动电网络中的非线性因素．由于诸多非线性因素的存在,使得 USM 系统具有跳跃、滞后、共振频率漂移、死区和饱和等非线性现象,同时,给 USM 的非线性动力学建模带来了困难．而 USM 闭环控制要求有一个合理的动力学模型,因此,研究 USM 的非线性动力学建模是 USM 研究中的一个重要内容．针对超声电机系统中普遍存在的非线性因素和非线性动力学建模方法进行了归纳,对已有文献中有关超声电机非线性动力学的研究进行了总结,指出了有关该方面的若干研究方向．      

Computational Power of Asynchronously Tuned Automata Enhancing the Unfolded Edge of Chaos

Asynchronously tuned elementary cellular automata (AT-ECA) are described with respect to the relationship between active and passive updating, and that spells out the relationship between synchronous and asynchronous updating. Mutual tuning between synchronous and asynchronous updating can be interpreted as the model for dissipative structure, and that can reveal the critical property in the phase transition from order to chaos. Since asynchronous tuning easily makes behavior at the edge of chaos, the property of AT-ECA is called the unfolded edge of chaos. The computational power of AT-ECA is evaluated by the quantitative measure of computational universality and efficiency. It shows that the computational efficiency of AT-ECA is much higher than that of synchronous ECA and asynchronous ECA.     

一种创新型感应电机调速系统的设计与实现

鉴于传统电力电子相关课程实验既无法直观了解电路内部构造,也不能有效提升实际动手能力的情况,设计了一种基于实验室环境的开放式创新型感应电机变频调速系统,改造了主电路和控制电路的电源,在适应实验室用电环境的同时,能实现主电路低压可测量和提升学生实验的安全性;并设计了采样电路和保护电路,能加深学生对电路的了解,增强实际动手能力.经实验验证,该系统能完成多段速运动控制、模拟量与数字量给定调速等相关实验.     

基于电磁力近似算法的驱动电机NVH快速仿真方法

电动汽车驱动电机产生的电磁噪声是汽车NVH关注的重点问题,对其进行全转速段多工况NVH仿真通常需要耗费大量时间和计算资源。该文通过有限单元分析揭示了电机气隙电磁力随转速变化的规律,并根据这一规律提出了基于外特性曲线的电磁力时间缩放及插值的近似算法。文章采用电磁力到结构网格的映射算法对结构振动有限元模型进行激励力加载,使用声场有限元方法计算电机的辐射噪声,最终实现了车用驱动电机的电磁振动及噪声的快速仿真。使用该方法对车用电机进行全转速段振动噪声仿真,可大大压缩多工况电磁场有限元分析所需的计算时间,提升仿真效率。     

由定子电流信号分析陀螺电机滚珠轴承故障诊断与分类（英文）

在陀螺电机中,轴承故障是最普遍的失效形式。针对陀螺电机球轴承中各组成部分出现故障难以区分,而更换整套轴承又造成巨大浪费的问题,提出了一种基于电流信号分析的陀螺电机轴承故障分类方法。该方法通过采集定子电流信号,并应用数学分析工具,提取出定子电流的特征信号。通过使用顺序递推法排除了冗余和无效特征,然后用最佳的特征信号建立特征空间。通过使用隐马尔科夫模型,对轴承的典型故障(外环故障、内环故障、球故障和保持架故障)进行了准确的分类。该方法的有效性在一台具有不同轴承故障的直流无刷陀螺电机上得到验证,实验结果显示分类的正确率达到97.1%。     

水波聚焦的研究

利用水波槽装置观察到了水波聚焦现象,并利用流体力学中的表面波理论,借用光学中对折射率的定义,推出了与光线通过薄透镜聚焦完全对应的水波聚焦理论公式,以及焦距随水深变化的关系曲线,从而将水波的几何特性与光波的几何特性统一起来。     

透射式能见度仪动态范围扩展方法

提出了一种利用光学衰减片与电机组合,扩展透射式能见度仪动态范围的方法。通过改变加载到LED光源的调制信号的幅度,控制LED光源的发射光强;设计测量系统,选择固定透过率的衰减片;设置合理的系统阈值完成数据测量。对测量数据作拟合分析,结果表明:采用透过率为60%的中性密度衰减片,系统动态范围扩展了0.6倍;透过率为12%时,系统动态范围扩展了6.9倍。同时,通过选择不同透过率的中性密度衰减片,可实现系统动态范围的灵活扩展。