柠檬酸铝/聚丙烯酰胺胶态分散凝胶反应动力学和机理的研究

采用粘度法研究了柠檬酸铝（AlCit)与部分水解取丙烯酰胺（HPAM）胶态分散凝胶体系的反应动力学。结果表明，胶态分散凝胶体系的交联反应是一级反应。并推导出胶态分散凝胶体系的反应动力学方程。     

C_(74)的结构、电子光谱及三阶线性光学性质的理论研究

用密度泛函（DFT）方法（BLYP/3－21G~*）研究了C_(74)的稳定几何构型。用 ZINDO及ab initio GIS两种方法对C_(74)的电子光谱进行了计算，预测C_(74)在红 外区域有光谱吸收。计算了C_(74)的三阶非线性光学系数<γ>为1.483 * 10~(-32) esu，它比C_(60)的<γ>（8.84 * 10~(-34) esu）要大得多。预测C_(74)亦将是 一种有很好应用前景的磁性材料。     

Lattice Thermal Transport in the Homogeneous Cage-Like Compounds Cu3VSe4 and Cu3NbSe4: Interplay between Phonon-Phase Space,Anharmonicity, and Atomic Mass

Understanding the correlation between crystal structure and thermal conductivity in semiconductors is very important for designing heat-transport-related devices, such as high-performance thermoelectric materials and heat dissipation in micro-nano-scale devices. In this work, the lattice thermal conductivity ( ) of the cage-like compounds Cu₃VSe₄ and Cu₃NbSe₄ was investigated by experimental measurements and first-principles calculations. The experimental of Cu₃NbSe₄ is approximately 25 % lower than that of Cu₃VSe₄ at 300 K. The relevant important physical parameters, including the sound velocity, heat capacity, weighted phonon phase space (W), and third-order force constants along with atomic mass were theoretically analyzed. It is found that W is the dominant parameter in determining the , and the other factors only play a minor role. The physical origin is the relatively “soft” lattice of Cu₃NbSe₄ with heavier atomic mass. This research provides deep insight into the correlation between the thermal conductivity and crystal structure and paves the way for discovering high-performance thermal management device and thermoelectric materials with intrinsically low .     

聚合物共混物脆韧转变性能研究 Ⅲ.分散相形态参数之间的关系

为了研究形态（特别是分散状态）对聚合物共混物韧性的影响，建立了准网络形态模型，定义了分散相分布系数（ξ，０＜ξ１），并给出其物理意义，推导了基体层厚度的计算公式，研究了形态参数的变化对基体层厚度的影响．对于常见的无规形态，ξ≈１．对于准网络形态，ξ＜１，并且不是常数．计算结果表明，减小ξ和分散相粒径及其分布、增大其体积分数有利于减小基体层厚度．从理论上证明了准网络形态比无规形态更有利于减小基体层厚度．     

带电胶体离子扩散与交换动力学的比较

Taking soil colloid and hydrated silica (quartz sand) as the experimental material, the comparative study has been made on the kinetics of ion diffusion and ion exchange in charged colloid and charged coarse disperse systems. The results showed that ion exchange kinetics in the two systems conform to the kinetic law of ion diffusion. Besides, through this comparative study on the kinetics of ion exchange and ion diffusion, a method has been advanced theoretically to estimate the quantity of adsorbed ion that is located in the inner of the Helmholtz layer. As far as hydrated silica is concerned , there were about 33 per cent of the total adsorbed quantity of Mg2+that were located in the inner of the Helmholtz layer under the given experimental conditions, bu tfor soil colloid the percentage was only 7.5.     

Dispersion polymerization of methyl methacrylate: Mechanism of particle formation

The mechanism for the formation of micron-size polymer particles in the dispersion polymerization of methyl methacrylate was investigated by applying dynamic light scattering to monitor the evolution of the average particle size in the early stages of the polymerization. In addition, the contributions of physically adsorbed stabilizer and graft copolymer were evaluated by measuring the bound, unbound (adsorbed), and free stabilizer, and by determining the amount of added stabilizer required in seeded dispersion polymerizations. Twenty nanometer particles (termed nuclei) were the smallest particles detected and are considered to be formed by aggregation of growing polymer chains precipitating from solution as they exceed their critical chain length. Aggregation of these nuclei with themselves and their aggregates continues until mature and stable particles are formed. This occurs when sufficient stabilizer occupies the particle surface which includes both the polymeric stabilizer [poly(vinylpyrrolidone)] and its graft copolymer which is created in situ. The effects of process variables are discussed based on this mechanistic picture of the dispersion polymerization process. © 1994 John Wiley & Sons, Inc.     

带甲基侧基的环氧树脂增容剂对炭黑在丁苯橡胶中分散度的影响

用自制的带甲基侧基的环氧树脂(TMBP)作为界面增容剂, 从拉伸性能、键合胶含量、动态性能、扫描电镜和流变性能等方面, 研究了TMBP对炭黑在丁苯橡胶中分散度的影响, 并与市售通用双酚A型环氧树脂(E-51)和橡胶工业常用软化剂邻苯二甲酸二辛酯(DOP)进行了比较. 结果表明, 带甲基侧基的环氧树脂TMBP在提高炭黑分散性方面的效果远比E-51好， 其作用模式具有典型的增容特性.     

Comparison of the Diffusion of Aqueous Glycine Hydrochloride and Aqueous Glycine

A Taylor dispersion tube has been used to measure mutual diffusion in aqueous solutions of glycine hydrochloride at 25°C and concentrations from 0.0005 to 0.5 M. Analysis of the dispersion profiles shows that the diffusion of glycine hydrochloride (GlyHCl) produces a subtantial additional flow of hydrochloric acid that is liberated by the dissociation: GlyH⁺ + Cl^- Gly + H⁺ + Cl^-. Diffusion in this system is, therefore, a ternary process described by the equations J ₁(GlyHCl) = – D ₁₁C ₁ – D ₁₂C ₂ and J ₂(HCl) = –D ₂₁C ₁ – D ₂₂C ₂ for the coupled fluxes of total glycine hydrochloride (1) and hydrochloric acid (2) components. The ratio D ₂₁/D ₁₁ of measured diffusion coefficients indicates that up to two moles of HCl are cotransported per mole of GlyHCl. Although protonated glycine diffuses with relatively mobile Cl^– counterions, the main diffusion coefficient of glycine hydrochloride, D ₁₁, is lower than or nearly identical to the diffusion coefficient of aqueous glycine. A model for the diffusion of protonated solutes is developed to interpret this result and the large coupled flows of HCl. Diffusion coefficients are also reported for the aqueous hydrochlorides of 3- and 4-aminobenzoic acids.     

Chemical Liquid Phase Deposition of Thin Aluminum Oxide Films

Introduction Inorganic oxide films have attracted a lot of interest in the last several decades. Among them, silicon dioxide films are widely used in modern microelectronics, optics and mechanics. This material has been grown by various methods including thermal oxidation, chemical vapor phase deposition, plasma-enhanced chemical vapor phase deposition, and so on.1,2 Recently, Nagayama et al.3 have reported that SiO2 thin films could be produced by a new chemical method of liquid phase depos…     

MoO3、NiO、ZnO在小表面金红石上的分散行为

Dispersion of MoO3, NiO, ZnO on rutile TiO2 with low specific surface area was studied with Mercury Porosimeter, SEM, XPS and Ammonia Extraction method. The dispersion thresholds of MoO3, NiO, ZnO on three rutile TiO2 carriers were obtained with XPS, and com-pared with those on anatase TiO2 with high specific surf are area. Ammonia Extraction method was used to identify the surface oxide species interarting with support surface in different strength and it was found that the proportions of oxides that can not be extracted by ammonia extraction are different for MoO3, NiO and ZnO which are supported on rutile TiO2.