Cross-phase modulation induced phase fluctuations in optical RZ pulse propagating in dispersion compensated WDM transmission systems

The basic mechanism of cross-phase modulation induced phase fluctuations in optical RZ pulse propagating in a periodically dispersion compensated transmission line has been investigated. Ordinary differential equations have been derived using variational analysis to estimate the phase fluctuation and the analytical result is verified by numerical simulations based on split-step Fourier method. We therefore explore the impact of different dispersion compensation maps on phase fluctuation for 10 Gb/s and 40 Gb/s WDM transmission systems. The effects of initial pulse spacing between channels, channel spacing and residual dispersion on phase shift have been studied. We find that cross-phase modulation induced phase fluctuation can be mitigated by proper adjustment of channel spacing and/or residual dispersion.     

Distributed strain measurement using a tellurite glass fiber with Brillouin optical correlation-domain reflectometry

A tellurite glass fiber with a high Brillouin gain was employed for distributed strain measurement with Brillouin optical correlation-domain reflectometry (BOCDR). First, the spatial resolution of BOCDR was evaluated using the tellurite fiber. With the high Brillouin gain of the fiber, it was confirmed clearly in the experiment that the spatial resolution is limited by the Rayleigh scattering-induced noise. Then, the dependence of the Brillouin frequency shift (BFS) on strain in the tellurite fiber was investigated, showing a negative dependence with a coefficient of −0.023 MHz/με. Using this tellurite fiber, the distribution of the BFS around a 1-cm strain-applied section was successfully measured with BOCDR of a nominal spatial resolution of 6 mm.     

Ytterbium-doped Y2O3 nanoparticle silica optical fibers for high power fiber lasers with suppressed photodarkening

We report efficient laser demonstration and spectroscopic characteristics of a Yb-doped Y₂O₃ (or Y₃Al₅O₁₂) nanoparticle silica fiber developed by conventional fiber fabrication technique. The spectroscopy study evidences modification in the environment of Yb ions by the Y₂O₃ nanoparticles. As a result, photodarkening induced loss is reduced by 20 times relative to Yb-doped aluminosilicate fibers. The fiber is suitable for power scaling with good laser slope efficiency of 79%.     

Spliced-fiber mode filter for 1060-nm single-mode transmission

We present a novel mode filter operating for the 1060-nm band, which selectively removes the power of the high-order mode (HOM) from a conventional single-mode fiber (C-SMF) that supports two modes at the short-wavelength band. Our mode filter is fabricated very easily by fusion-splicing a short section of short-wavelength single-mode fiber in the middle of the C-SMF link. By using our spliced-fiber mode filter (SF-MF), a high HOM suppression performance of > 18 dB has been achieved with a low insertion loss of < 0.3 dB over the full band of optical communications from 1050 nm to 1650 nm. We have also developed a new mode power measurement scheme that takes advantage of the bending sensitivity of the HOM guidance. This measurement scheme enabled us to evaluate accurately the performance factors of the fabricated mode filter.     

Generation of picosecond soliton pulses with tunable repetition rate by modulational instability

Picosecond soliton pulse train has been obtained from a passively mode locked erbium-doped ring fiber laser. The passive mode-locking mechanism that is at play in this laser relies on the modulational instability (MI) theory. By accurately adjusting the polarization setting of the circulating cavity light, the repetition rate can be tuned from 58 to 114 GHz. Theoretical explanations has also been given.     

The analysis of spatial light to Bragg fiber coupling ratio

On the basis of the electromagnetic field mode matching theory, the coupling efficiency ratio from spatial light to Bragg fiber is analyzed, which shows that the coupling efficiency ratio is related to the radius of focused facular, the core radius of Bragg fiber and wave number of the core. By optimizing the value of such parameters appropriately, the Bragg fiber coupling efficiency ratio can be improved. It is also important for the analysis of the coupling efficiency of Bragg fiber, which can be applied to the free optical communication system and laser radar system.     

Switchable dual-wavelength Erbium-doped fiber ring laser with cascaded fiber Bragg gratings

We have experimentally shown wavelength mode switching in a dual-wavelength Erbium-doped single cavity fiber laser where the initial two wavelengths of 1 nm spacing are determined by the cascaded reflection type short-period fiber Bragg gratings having two different centre wavelengths of 1550.5 and 1551.5 nm. The lasing mode depends on the polarization in the ring cavity to migrate from one wavelength to another or operates in both modes in a polarization beam splitter output. To effectively control the polarization in the ring cavity, the polarization controllers were positioned before and after the polarization beam splitter. This method of wavelength switching provides a simple way of mode tuning in dual-wavelength fiber lasers.     

Regeneration of surface roughness by the Langevin equation using stochastic analysis on AFM image of a carbon fiber

A new method was developed using AFM images of a fiber surface to regenerate the surface roughness in 3D geometry, such as the cylindrical shape of a “model” fiber. The Langevin equation was used to derive the fluctuations of a carbon fiber surface image. The equation contains two quantities, D⁽¹⁾ (h) and D⁽²⁾ (h) which in physics represent drift and diffusion coefficients. Knowing this coefficient and adding a proper noise function, a similar surface of larger dimension with the same statistical properties of the initial data was created. The generated surface was mapped into cylindrical coordinates, then a mesh generated. The resulting reconstructed surface, input over the geometry of a cylindrical shape, can be implemented for finite element analysis of a single fiber surrounded by matrix and generalized to a many fiber model.     

Silver nanoparticles on amidoxime fibers for photo-catalytic degradation of organic dyes in waste water

Herein we report that a new photo-catalyst of silver nanoparticles attached on the surface of amidoxime fibers was developed and evaluated. The nanoparticles had different sizes from tens to hundreds of nanometers and varied shapes of cube, plate, and sphere; and there were coordination interactions between the nanoparticles and the amidoxime fibers. The developed photo-catalyst demonstrated high activities for degradation of an organic dye of methyl orange, particularly under sunlight; and the catalyst could be re-activated for several times by simple tetrahydrofuran treatment. The results also suggested that the silver nanoparticles initiated and/or mediated the photo-oxidation reaction of methyl orange through localized surface plasmon resonance under sunlight, and the photo-catalytic activities were primarily determined by sizes and/or surface-to-mass ratios instead of shapes of the silver nanoparticles.     

Exact stationary-wave solutions in the standard model of the Kerr-Nonlinear optical fiber with the Bragg grating

By using dynamical system method to the standard model of the Kerr-Nonlinear optical fiber with the Bragg grating, under fixed parameter conditions, all possible exact parametric representations of the bounded stationary wave solutions are obtained from the double sine-Gordon equation.