Electron Probe Microanalysis of HfO2 Thin Films on Conductive and Insulating Substrates

Quantitative electron probe microanalysis of highly insulating materials is a complicated problem, partially solved by coating samples with grounded thin conductive layers or using novel scanning electron microscopy (SEM) techniques, such as low-voltage and/or variable pressure SEM. In this work, some problems of quantitative X-ray microanalysis of thin HfO₂ films, in particular the possibility to determine mass thickness correlated to the density of the layer material, are discussed. For comparison, Al₂O₃, Ta₂O₅ and TiO₂ films grown onto both semiconductive Si and insulating quartz substrates were also analysed. All the films studied were synthesized by atomic layer deposition method.     

Mass transfer to horizontal gas-generating electrodes

Mass transfer to a horizontal electrode during electrolytic evolution of oxygen and hydrogen at current densities of 100 to 10 000 A/m² is studied. The mass transfer intensity is evaluated from the diffusion layer thickness, which varies from 60 to 5 μm at such current densities. Calculations show that the decrease in the diffusion layer thickness is due to bubbles with a stationary interphase surface crossing the diffusion layer. During the hydrogen evolution, the diffusion layer thickness is nearly the same for vertical and horizontal electrodes. During the oxygen evolution, the diffusion layer is much thinner for a horizontal electrode. Additional decrease of the diffusion layer thickness during the evolution of oxygen is associated with the lesser solution density in the near-electrode layer and with its transport away by means of natural convection.     

Heterometallic lead-titanium oxyalkoxide precursors to lead titanate thin films

Two lead titanium oxyalkoxides with composition Pb₂Ti₄O₂(O₂CCH₃)₂(OC₂H₅)₁₄ and Pb₂Ti₂O₂(O₂CCH₃)₂(OCH(CH₃)₂)₈ have been isolated and characterised by elemental analysis, IR, ²⁰⁷Pb NMR and molecular weight measurements. X-ray structural analysis of the 1:2 complex confirmed the presence of two Pb₂Ti₂O units which are linked by a common Pb···Pb edge and are held together by alkoxide and acetate bridges. The acetate groups have migrated from the Pb to the Ti centres during the reaction. Hydrolysis of the 1:1 Pb/Ti complex produced clear gels providing the H₂O/complex ratio was less than 4. Heat treatment of the gel results in loss of residual organics below 400°C. The XRD pattern indicates the presence of the pyrochlore and perovskite phases after heating at 500°C but the sample is poorly crystalline. Complete conversion to the perovskite phase of lead titanate occurs on heating to 600°C for 1 hour. Thin films of lead titanate were deposited by dip-coating a solution of this complex in isopropanol. Analyses of the films, carried out using electron microprobe, Scanning Auger Spectroscopy and Rutherford Backscattering, indicated that they were of excellent quality, crystalline after heating at 600°C and with relatively sharp substrate-coating interface.     

Linked crystallites in the conducting topmost layer of polymer bilayer films controlled by temperature: from micro- to nanocrystallites.

Temperature has great impact on the structure and size of the linked crystallites of the conducting topmost layer formed at the surface of a polycarbonate film via the reaction BEDT-TTF+IBr [BEDT-TTF=bis(ethylenedithio)tetrathiafulvalene]. We show that fine temperature control permits formation of a semiconducting topmost layer of alpha'-(BEDT-TTF)(2)(I(x)Br(1-x))(3) crystallites with either micro- or nanometre size, a result that opens a route to miniaturized conducting plastic materials.     

Selective Formation of Spinel Iron Oxide in Thin Films by Complexing Agent-Assisted Sol-Gel Processing

The structure of iron oxide was controlled by regulating the hydrolytic polymerization of aquo iron complexes with organic polydentate ligands such as diols. Iron oxides were prepared by calcining the precursor polymers obtained from iron nitrate nonahydrate and diols. When the diols were 1,2-pentanediol, 1,2-hexanediol and 1,2-octanediol, α-Fe₂O₃ with corundum structure appeared exclusively or as the main crystalline phase, in spite of the amount of diol used and the calcination temperature. In the case of 1,2-decanediol and 1,2-dodecanediol, when five moles of the diols were used to one mole of iron nitrate and the calcination temperatures were below 400°C, ψ-Fe₂O₃ with spinel structure appeared as the main phase and, when less than five moles of the diols were used, α-Fe₂O₃ appeared exclusively or as the main phase, irrespective of the calcination temperature. This tendency was also observed in thin films. Thus, a transparent magnetic film composed of γ-Fe₂O₃ could be prepared by applying a benzene solution of the iron polymer, obtained with 5 equivalents of 1,2-decanediol, on quartz and calcining the gel film at 350°C.     

Quantification of Valerenic Acid in Valeriana jatamansi and Valeriana officinalis by HPTLC

A simple, rapid, cost-effective and accurate high performance thin layer chromatographic method has been developed for quantification of valerenic acid in Valeriana jatamansi and Valeriana officinalis which is one of the stable compounds of Valeriana officinalis and designated as a key marker compound. Valerenic acid makes substantial contribution to the sedative and spasmolytic activity of the essential oil and extract of Valeriana officinalis. Separation and quantification was achieved by HPTLC using ternary mobile phase of hexane: ethyl acetate: acetic acid (80:20:0.5 v/v) on precoated silica gel 60F₂₅₄ aluminium plates and densitometric determination was carried out after derivatization with anisaldehyde-sulphuric acid reagent at 700 nm, in absorption-reflectance mode. The calibration curves were linear in the range of (500 ng–2.5 μg). This is the first HPTLC report for the identification and quantification of valerenic acid in Valeriana jatamansi and Valeriana officinalis.     

溶胶-凝胶法制备高取向Bi4Ti3O12/SrTiO3(100)薄膜

Bi4Ti3O12具有良好的铁电、电光等性能山、特别是Bi4Ti3O12薄膜很适合作永久性存储材料，也可用于电光器件问．在微电子学、光电子学、集成光学、集成铁电学等领域均有广泛开发和应用前景，国外已用溅射法、激光沉积法制备出c轴取向Bi。Ti3Ol。薄膜【’，＼山东大学用MOCVD法制     

Voltammetric, chronocoulometric and spectroelectrochemical studies of electropolymerized films based on Co(III/II)- and Zn(II)-4,9,16,23-tetraaminophthalocyanine: effect of high pH

Electropolymerized thin films of Co(III/II)- and Zn(II)-4,9,16,23-tetraaminophthalocyanine, immersed in solutions of relatively high pH, have been studied electro- and spectroelectrochemically. Cyclic voltammetry and chronocoulometry were used to characterize films deposited on glassy carbon electrodes. Spectroelectrochemistry and ellipsometry measurements were performed on indium tin oxide (ITO) surfaces coated with the zinc and cobalt complexes and correlated to the electrochemical information collected using glassy carbon electrodes. Studies at high pH are motivated by the efficient increase in luminol chemiluminescence at high OH⁻ concentration, and by potential application in luminescence sensors. Although the films are not removed, some structural changes occur when they are exposed to solutions of high pH. In addition, an estimation of the number of monolayers has also been calculated. The atomic diameters of cobalt and zinc are very close in value, but the estimated number of monolayers, based on cyclic voltammetric data, for a given number of electropolymerization cycles is approximately four-fold higher in the zinc-based film. This would correspond to three-fold thicker films when zinc is the central metal ion. Ellipsometry measurements have been correlated with cyclic voltammetric data to confirm that film thickness varies among the different complexes, even though the conditions of electropolymerization are the same.     

Effect of Inorganic Ions on Oleate Adsorption at a Nigerian Hematite–Water Interface

Using “pure” natural hematite selected from a high silica Nigerian hematitic ore, oleate adsorption densities at the hematite–water interface were determined in the presence of various inorganic ions (anions and cations) of different charges and at varying concentrations. Adsorption density was determined using electrical conductivity measurements. The specific surface area of the hematite particles was determined using the method of adsorption of paranitrophenol in aqueous solution. Inorganic ions in solution depressed oleate adsorption at the aqueous hematite surface. The charge of the ion proved to be the dominant factor determining the depression of oleate adsorption. Ionic strength also was an influence, up to a limiting value at which monolayer oleate coverage of the hematite surface occurred. The inorganic ions in solution are considered to function through nonspecific adsorption in the diffuse region of the electric double layer.     

Acetylation and molecular mass effects on barrier and mechanical properties of shortfin squid chitosan membranes

Chitosan samples with different N-deacetylation levels were obtained from β-chitin under heterogeneous alkali conditions. Oxidative depolymerisation was performed to attain low-acetylated chitosan samples with different molecular mass. Water vapour permeability, membrane swelling and tensile mechanical properties were analysed in plasticized self-supporting chitosan membranes. The main purpose was to describe unambigously the effect of the biopolymer molecular mass and acetylation degree on these properties. Commercially available chitosan samples derived from α-chitin were also studied for comparison. The equilibrium degree of swelling in water and the water vapour permeability increase by increasing the molecular mass or the degree of acetylation. Regarding the effect on the mechanical properties, generally harder and tougher membranes were obtained for chitosans with higher molecular mass or lower acetylation degree. These observations are tentatively explained based on the different structural characteristics of the polymer and can lead to a better understanding of the tools necessary to tailor a specific type of chitosan membrane.