Morphology and spectral properties of thin films of benzoxazole derivatives of biphenyl

We have studied the spectral properties and morphology of thin films (TVD films) formed by thermal vacuum deposition of 4,4′-bis[(E)-1-(1,3-benzoxazol-2-yl)-2-ethenyl]-1,1′-biphenyl and its substituted derivatives. We have shown that introducing bulky 2,2′-oxyhexyl substituents into the biphenyl units leads to a shift of the fluorescence maximum for the TVD films toward shorter wavelengths, a decrease in their photostability, and aggregation of the films during storage. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 3, pp. 300–303, May–June, 2007.     

胶束薄层色谱法测定食品及药用胶囊中的合成食用色素

在聚酰胶片上以13%SDBS(十二烷基苯磺酸钠)+7%Triton X-100〔聚乙二醇-对-(1.1,3,3-四甲基)丁基苯基醚〕+(2+3)氨水(1+5+1)为展开剂,用胶束薄层色谱法分离和测定了柠檬黄、亮蓝、苋菜红、胭脂红和赤藓红。测定波长分别为440、632、535、525和528 nm,线性范围分别为0.1～2、0.05～1、0.05～1、0.05～1和0.05～1μg/斑点。方法用于测定软饮料糖果及药用胶囊中的合成色素,获得了满意的结果。此外,还对展开剂的最佳组成进行了单纯形法优化。     

酞菁钴薄膜的折射率及吸收特性

通过真空镀法在单晶硅片上制备了酞菁钴薄膜，在波长扫描和入射角可变全自动椭圆偏振光谱仪上研究了ＣｏＰｃ薄膜的椭偏光谱并分析了其电子结构。     

Structural and electrical properties of crystalline (1−x)Ta2O5−xTiO2 thin films fabricated by metalorganic decomposition

Polycrystalline (1−x)Ta₂O₅−xTiO₂ thin films were formed on Si by metalorganic decomposition (MOD) and annealed at various temperatures. As-deposited films were in the amorphous state and were completely transformed to crystalline after annealing above 600 °C. During crystallization, a thin interfacial SiO₂ layer was formed at the (1−x)Ta₂O₅−xTiO₂/Si interface. Thin films with 0.92Ta₂O₅–0.08TiO₂ composition exhibited superior insulating properties. The measured dielectric constant and dissipation factor at 1 MHz were 9 and 0.015, respectively, for films annealed at 900 °C. The interface trap density was 2.5×10¹¹ cm⁻² eV⁻¹, and flatband voltage was −0.38 V. A charge storage density of 22.8 fC/μm² was obtained at an applied electric field of 3 MV/cm. The leakage current density was lower than 4×10⁻⁹ A/cm² up to an applied electric field of 6 MV/cm.     

Thick grids with circular apertures: A comparison of theoretical and experimental performance

In this paper a comparison between a rigorous electromagnetic model for transmission through a hexagonal array of circular waveguides in a series of thick, metallic screens and experimental measurements in the far infrared is made. It is found that there is excellent agreement between theory and experiment when the frequency is below that where any diffracted orders propagate. The agreement is still very good above this frequency. Below a frequency approximately equal to the cut-off frequency of the circular waveguides little power is transmitted. As the thickness of the screen is increased, this decrease in transmission becomes more abrupt. Also, for thick screens, resonances appear in the transmission spectrum which are analogous to those which appear in the spectra of two grids separated by a distance comparable to the wavelength of the radiation being used.     

A novel approach to thermal Analysis of Thin films

A novel instrument is described called the Thin film Analyser (TFA) which quantitatively measures changes in mechanical and rheological properties of drying films in-situ on a test panel. It is based around a simple force-sensing device, capable of carrying various probes, which can be positioned in anX-Y plane over the panel. Temperature control is achieved by means of a heating block under the sample. By imposing a thermal gradient along the block, measurements can be obtained at a series of temperatures in a single experiment. Several applications of the TFA to the drying of curable and latex-based coatings are discussed, as well as some more specialized uses. The TFA concept represents a novel approach to the thermal analysis of thin films.The authors gratefully acknowledge the design, engineering and software development work of the Instrument Group at ICI Paints, in particular John Hayton, Neil Burrows, Tony Evans and Ian Francis, who have now built three versions of the TFA.     

Morphological and chemical study of the initial growth of CdS thin films deposited using an ammonia-free chemical process

We study the initial growth stages of CdS thin films deposited by an ammonia-free chemical bath deposition process. This ammonia-free process is more environmentally benign because it reduces potential ammonia release to the environment due to its high volatility. Instead of ammonia, sodium citrate was used as the complexing agent. We used atomic force microscopy (AFM), Rutherford backscattering (RBS) and X-ray photoelectron spectroscopy (XPS) to investigate the morphological and chemical modifications at the substrate surface during the first initial stages of the CdS deposition process. Additionally, X-ray diffraction (XRD) and optical transmission spectroscopy measurements were carried out to compliment the study. XPS results show that the first nucleation centers are composed by Cd(OH)₂ which agglomerate in patterns of bands, as demonstrated by AFM results. It is also observed that the conversion to CdS (by anionic exchange) of the first nucleus begins before the substrate surface is completely covered by a homogenous film.     

动态广义球对称含荷黑洞的统计熵

利用改进了的brickwall膜模型,计算了动态广义球对称含荷黑洞的熵,研究结果表明,对于动态黑洞,将黑洞熵表示为与视界面积成正比时,则比例系数总与动态黑洞的视界速度有关 关键词： 广义球对称黑洞 黑洞熵 brick-wall膜模型 WKB近似     

Improved coating method for uniform polymer layer in infrared hollow fiber

An improved coating method was proposed in order to form a uniform polymer layer in the fabrication of cyclic olefin polymer-coated silver (COP/Ag) hollow fiber. A COP solution was flowed in a closed loop, in which the silver-coated tube was used as a part of the loop. Owing to the constant flowing speed of the COP solution and the airtight flowing environment, a COP layer was uniformly formed. The hollow fibers attain high performance and deliver multi-wavelength laser light from the infrared to the visible simultaneously. The method was successfully applied to the fabrication of practical hollow fibers with 2 m length for the near and mid-infrared lasers.     

Chemical synthesis of p-type nanocrystalline copper selenide thin films for heterojunction solar cells

Nanocrystalline thin films of copper selenide have been grown on glass and tin doped-indium oxide substrates using chemical method. At ambient temperature, golden films have been synthesized and annealed at 200 °C for 1 h and were examined for their structural, surface morphological and optical properties by means of X-ray diffraction (XRD), scanning electron microscopy and UV-vis spectrophotometry techniques, respectively. Cu_2−xSe phase was confirmed by XRD pattern and spherical grains of 30 ± 4 - 40 ± 4 nm in size aggregated over about 130 ± 10 nm islands were seen by SEM images. Effect of annealing on crystallinity improvement, band edge shift and photoelectrochemical performance (under 80 mW/cm² light intensity and in lithium iodide electrolyte) has been studied and reported. Observed p-type electrical conductivity in copper selenide thin films make it a suitable candidate for heterojunction solar cells.