Chitosan/UiO-66 composites as high-performance adsorbents for the removal of methyl orange in aqueous solution

UiO-66 and chitosan/UiO-66 composites were successfully synthesized by varying the mass addition of chitosan which were 0%, 2.5%, 5%, 10%, and 20% of the mass of UiO-66, denoted as UiO-66, Cs(2.5)/UiO-66, Cs(5)/UiO-66, Cs(10)/UiO-66, and Cs(20)/UiO-66, respectively. UiO-66 was modified with chitosan using the impregnation process. The X-ray diffraction patterns of the synthesized materials showed characteristic peaks at 2θ of 7.25° and 8.39°, which matched to that of the reported UiO-66. In addition, the Fourier transform infrared spectroscopy spectra of the materials showed absorption bands at the same wavenumber as UiO-66 and chitosan previously reported. The surface morphology of UiO-66 observed from scanning electron microscopy images was in the form of agglomerated small cube particles, where the smaller particles were observed for Cs(10)/UiO-66. From the N₂ adsorption isotherms, it was found that the Brunauer-Emmett-Teller surface areas of UiO-66, Cs(5)/UiO-66, and Cs(10)/UiO-66 materials were 825.7 m²/g, 835.4 m²/g, and 882.2 m²/g, respectively. The results of the study on adsorption of methyl orange in aqueous solutions showed that Cs(5)/UiO-66 had the highest adsorption capacity of 370.37 mg/g and followed the pseudo–second-order adsorption kinetic with a Langmuir isotherm model.     

Removal of Cd(II), Cu(II), and Pb(II) by adsorption onto natural clay: a kinetic and thermodynamic study

In this work, we study the elimination of three bivalent metal ions (Cd²⁺, Cu²⁺, and Pb²⁺) by adsorption onto natural illitic clay (AM) collected from Marrakech region in Morocco. The characterization of the adsorbent was carried out by X-ray fluorescence, Fourier transform infrared spectroscopy and X-ray diffraction. The influence of physicochemical parameters on the clay adsorption capacity for ions Cd²⁺, Cu²⁺, and Pb²⁺, namely the adsorbent dose, the contact time, the initial pH imposed on the aqueous solution, the initial concentration of the metal solution and the temperature, was studied. The adsorption process is evaluated by different kinetic models such as the pseudo-first-order, pseudo-second-order, and Elovich. The adsorption mechanism was determined by the use of adsorption isotherms such as Langmuir, Freundlich, and Temkin models. Experiments have shown that heavy metals adsorption kinetics onto clay follows the same order, the pseudo-second order. The isotherms of adsorption of metal cations by AM clay are satisfactorily described by the Langmuir model and the maximum adsorption capacities obtained from the natural clay, using the Langmuir isotherm model equation, are 5.25, 13.41, and 15.90 mg/g, respectively for Cd(II), Cu(II), and Pb(II) ions. Adsorption of heavy metals on clay is a spontaneous and endothermic process characterized by a disorder of the medium. The values of ΔH are greater than 40 kJ/mol, which means that the interactions between clay and heavy metals are chemical in nature.     

基于(火积)理论的“+”形高导热构形通道实验研究

基于构形理论和■理论,对"+"形高导热通道的方形构造体开展导热实验研究,并对不同优化目标和不同高导热通道布置形式下的构造体导热性能进行比较.结果表明:对于"+"形高导热通道的方形构造体,实验和数值计算所得到的构造体最高温度点均位于"+"形高导热通道两分支之间,实验和数值计算所得到的构造体平均温差和■耗散率的误差均在可接受范围内,这从定性和定量的角度证明了导热构形优化结果的正确性.与"H"形高导热通道的方形构造体相比,构造体内高导热通道采用一级"+"形布置使得其导热■耗散率得到降低.■耗散率最小的一级"+"形高导热通道构造体最优构形与最大温差最小的构造体最优构形相比,前者的导热■耗散率降低了5.98%,但最大温差提高了3.57%.最大温差最小目标有助于提高构造体的热安全性,■耗散率最小目标有助于提高构造体的整体导热性能.在保证热安全性能的前提下,实际微电子器件设计中可采用■耗散率最小的构造体最优构形以提高其整体导热性能.     

Thermodynamically equilibrium roton states of nanoparticles in molten and vapour phases

We show a possibility for a thermodynamically equilibrium nanocrystalline structure consisting of nanosized solid inclusions to appear in a melt just beyond the melting curve. Thermodynamic stability of the nanocrystalline structure in the melt results from the free energy lowering due to rotational motion of nanoparticles. The main contribution to the reduction of the free energy of the system is due to an increase in the rotational entropy and change in formation energy of nanocrystals, i.e. the nanocrystalline structure in the melt, like vacancies in a crystal, is an equilibrium defect structure of the melt. It is demonstrated that similar nanocrystalline structures can also appear in the vapour phase in the form of liquid nanodrops and in liquid solutions, e.g. in He II.     

First-principles calculation of structural stability,lattice dynamic and thermodynamic properties of BeX (X = S,Se and Te) compounds under high pressure

The phase transitions, lattice dynamical and thermodynamic properties of BeS, BsSe and BeTe at high pressure have been investigated with the density functional theory. The calculated equilibrium structural parameters agree well with the available experimental and theoretical values. The phase transition pressures from the zinc-blende (ZB) to the nickel arsenide (NiAs) phase of these compounds are determined. The calculated phonon dispersion curves of these compounds in ZB phase at zero pressure do not show any anomaly or instability. Dynamically, the ZB phase of BeS, BeSe and BeTe is found to be stable near transition pressures P_T. Within the quasiharmonic approximation, the thermodynamic properties including the thermal expansion coefficient, heat capacity at constant volume, heat capacity at constant pressure and entropy are predicted.     

A Tetrameric Cage with D2h Symmetry through Alkyne Metathesis

Shape‐persistent covalent organic polyhedrons (COPs) with ethynylene linkers are usually prepared through kinetically controlled cross‐coupling reactions. The high‐yielding synthesis of ethynylene‐linked rigid tetrameric cages via one‐step alkyne metathesis from readily accessible triyne precursors is presented. The tetrameric cage contains two macrocyclic panels and exhibits D_2h symmetry. The assembly of such a COP is a thermodynamically controlled process, which involves the initial formation of macrocycles as key intermediates followed by the connection of two macrocycles with ethynylene linkages. With a large internal cavity, the cage exhibits a high binding selectivity toward C₇₀ (K=3.9×10³ L mol^?1) over C₆₀ (no noticeable binding).     

Intrinsic Flexibility of the Zeolitic Imidazolate Framework ZIF‐7 Unveiled by CO2 Adsorption and Hg Intrusion

ZIF‐7, built as an assembly of Zn^II centers and benzimidazolate ligands, shows prominent S‐shaped isotherms upon CO₂ adsorption that can be attributed to sorbate‐induced gate‐opening phenomena involving a narrow‐to‐large pore phase transition. This peculiar sorption pattern can be captured via the formulation of thermodynamic isotherms, providing a direct enthalpic and entropic view of the gate‐opening process. Relying on such an approach, an energy barrier with preferential enthalpic nature for CO₂ adsorption/desorption in the gate‐opening region could be unveiled. Moreover, the elastic energy involved during the gate‐opening process was revisited to 1.4–2.8 kJ mol^?1 of solid in the temperature range 273–323 K, matching the value measured by isostatic compression of a ZIF‐7_lp sample filled with DMF and showing a dominant entropic contribution.     

First-principle investigation of XSrH3 (X = K and Rb) perovskite-type hydrides for hydrogen storage

Hydrogen can be utilized as an energy source; therefore, hydrogen storage has received the most appealing examination interest in recent years. The investigations of hydrogen storage applications center fundamentally around the examination of hydrogen capacity abilities of recently presented compounds. XSrH₃ (X = K and Rb) compounds have been examined by density functional theory (DFT) calculations to uncover their different characteristics, as well as hydrogen capacity properties, for the first time. Studied compounds are optimized in the cubic phase, and optimized lattice constants are obtained as 4.77 and 4.99 Å for KSrH₃ and RbSrH₃, respectively. These hydrides have shown negative values of formation enthalpies as they are stable thermodynamically. XSrH₃ might be used in hydrogen storage applications because of high gravimetric hydrogen storage densities, which are 2.33 and 1.71 wt% for KSrH₃ and RbSrH₃, respectively. Moreover, electronic properties confirm the semiconductor nature of these compounds having indirect band gaps of values 1.41 and 1.23 eV for KSrH₃ and RbSrH₃, respectively. In addition, mechanical properties from elastic constants such as Young modulus and Pugh's ratio, also have been investigated, and these compounds were found to satisfy born stability conditions. Furthermore, Pugh's ratio and Cauchy pressure show that these hydrides have a brittle nature. Furthermore, thermodynamic properties such as entropy and Debye temperature have been examined using the quasiharmonic Debye model for different temperatures and pressures.     

In Situ Dispersion of Palladium on TiO2 During Reverse Water–Gas Shift Reaction: Formation of Atomically Dispersed Palladium

The application of single‐atom catalysts (SACs) to high‐temperature hydrogenation requires materials that thermodynamically favor metal atom isolation over cluster formation. We demonstrate that Pd can be predominantly dispersed as isolated atoms onto TiO₂ during the reverse water–gas shift (rWGS) reaction at 400 °C. Achieving atomic dispersion requires an artificial increase of the absolute TiO₂ surface area by an order of magnitude and can be accomplished by physically mixing a precatalyst (Pd/TiO₂) with neat TiO₂ prior to the rWGS reaction. The in situ dispersion of Pd was reflected through a continuous increase of rWGS activity over 92 h and supported by kinetic analysis, infrared and X‐ray absorption spectroscopies and scanning transmission electron microscopy. The thermodynamic stability of Pd under high‐temperature rWGS conditions is associated with Pd‐Ti coordination, which manifests upon O‐vacancy formation, and the artificial increase in TiO₂ surface area.