Cr^4＋：YAG,Cr^4＋：Mg2SiO4近红外荧光辐射温度特性研究

测量了Ｃｒ＾４＋，ＹＡＧ、Ｃｒ＾４＋，Ｍｇ２ＳｉＯ４晶体在室温和液氮温度下的荧光光谱，吸收光谱和激发态寿命，讨论了温度变化时，两种晶体中Ｃｒ＾４＋近红外辐射积分强度变化与激光发态寿命变化的关系，得出结论：在７７Ｋ￣３００Ｋ范围内，Ｃｒ＾４＋的＾３Ｔ２能级荧光辐射截面本身受温度影响不大，Ｃｒ＾４＋辐射荧光的变化，主要是由无辐射弛豫速率随温度变化而引起的。     

Optical current transducer with bulk type Bi12SiO20 faraday sensor for power systems

Two types of optical current transducers (OCTs) have a bulk Faraday sensor inserted into the gap of an iron core and a porcelain insulator with optical fiber. The sensor consists of Bi₁₂SiO₂₀ (BSO) single crystal, a polarizer, and an analyzer. The OCTs satisfied the target performance requirement for fault location and metering and demonstrated maintained performance at some power utilities in Japan and the US. We have developed a fault location system that immediately detects the fault current with the OCTs, there by locating the fault section. The OCT can easily replace the existing support insulators for the disconnecting switch without any modifications to structure height or bus-bar. For metering requiring 0.3% class accuracy, use of a BSO with right optical rotatory power combined with BSO with left optical rotatory power results in a Faraday sensor with improved temperature characteristics. The OCT demonstrated 0.3% class accuracy for metering described in the current transformer Specifications of IEEE C57–13, 1993.     

Lipschitz classes on local fields

The Lipschitz class Lipαon a local field K is defined in this note,and the equivalent relationship between the Lipschitz class Lipαand the Holder type space C~α(K)is proved.Then,those important characteristics on the Euclidean space R~n and the local field K are compared,so that one may interpret the essential differences between the analyses on R~n and K.Finally,the Cantor type fractal functionθ(x)is showed in the Lipschitz class Lip(m,K),m＜(ln 2/ln 3).     

Energy crisis or a new soliton in the noncommutative CP(1) model?

The non-commutative (NC) CP(1) model is studied from field theory perspective. Our formalism and definition of the NC CP(1) model differs crucially from the existing one [Phys. Lett. B 498 (2001) 277, hep-th/0203125, hep-th/0303090].

Due to the U(1) gauge invariance, the Seiberg–Witten map is used to convert the NC action to an action in terms of ordinary spacetime degrees of freedom and the subsequent theory is studied. The NC effects appear as (NC parameter) θ-dependent interaction terms. The expressions for static energy, obtained from both the symmetric and canonical forms of the energy momentum tensor, are identical, when only spatial noncommutativity is present. Bogomolny analysis reveals a lower bound in the energy in an unambiguous way, suggesting the presence of a new soliton. However, the BPS equations saturating the bound are not compatible to the full variational equation of motion. This indicates that the definitions of the energy momentum tensor for this particular NC theory (the NC theory is otherwise consistent and well defined), are inadequate, thus leading to the “energy crisis”.

A collective coordinate analysis corroborates the above observations. It also shows that the above mentioned mismatch between the BPS equations and the variational equation of motion is small.     

Deposition conditions in tailoring the morphology of highly porous reticular films prepared by electrostatic spray deposition (ESD) technique

Spongy-like reticular structure is a unique morphology fabricated by electrostatic spray deposition (ESD) technique. The effects of solvent, substrate temperature, precursor feeding rate, static electric field strength, and deposition time on tailoring the reticular structure were investigated. Scanning electron microscopy was used to observe the film morphology. MnO_x or LiMn₂O₄ were selected as the model materials. It is found that in addition to the conventional solvent butyl carbitol, other kinds of solvents such as ethylene glycol and propylene glycol can also be used to obtain reticular films at a suitable substrate temperature. Porous films with a low cross-linking degree pore structure can be prepared by increasing precursor feeding rate or decreasing substrate temperature. Increasing the deposition time or the electric field strength helps to obtain reticular films with more homogeneous pore size distribution. In addition, the addition of a high boiling-point solvent in mixed alcohol solvent results in the increase of proper substrate temperature. It is concluded that the fluidity of the spray droplets on the surface of a hot substrate is an important factor to form a reticular film.     

Asymptotics in the Baum—Katz formula for random fields

In 1996, D. Deng established an analog of the Baum—Katz theorem on the convergence rate in the law of large numbers for multi-indexed random variables. The series describing the convergence rate depends, in a natural way, on the parameter characterizing the excess of the normalized sums over some level. In this paper, we find the precise asymptotics of the sum of this series with respect to the above-mentioned parameter. Thus, a generalization of a recent result due to A. Gut and A. Spataru is obtained.     

Nanophotonics and nanometrology with planar X-ray waveguide-resonator

The mechanism of X-ray waveguide-resonance propagation or the radiation superstream model, which can become the ground of X-ray nanophotonics, is discussed briefly. Some attention is devoted to features consideration of the simplest devices characterized by the waveguide-resonance transportation of X-ray beams. The experimental data showing the user possibilities of a simplest waveguide-resonators application for diffractometry are presented. We discuss the main reasons to improve the metrological characteristics for total reflection X-ray fluorescence (TXRF) analytical method in case when the target exciting beam is formed by a waveguide-resonator. Some problems appearing during the waveguide-resonator application are formulated.     

Mössbauer effect study of the decagonal quasicrystal Al65Co15Cu20

The ⁵⁷Fe Mössbauer effect study at 5.0 K and in an external magnetic field of 9.0 T on a high-quality stable decagonal quasicrystal Al₆₅Co₁₅Cu_19.9Fe_0.1 is presented. It is shown that the iron atoms are located in two distinct classes of sites. The values of the principal component of the electric field gradient tensor and the asymmetry parameter at these sites are, respectively, ?1.90(10)?×?10²¹ V/m², 0.97(15) and ?3.95(12)?×?10²¹ V/m², 0.00(17).     

The Nature of Electronic Charge

Advances in gauge theories and unified theories have not thrown light on the meaning of electron. The problem of the origin of electronic charge is made precise, new insights gained from Weyl space are summarized, and the origin of charge in terms of fractional spin is suggested. A new perspective on the abelian Chern-Simons theory is presented to explain charge.     

Preparation and characterization of ZnO nanorods from NaOH solutions with assisted electrical field

ZnO naorods on ZnO-coated seed substrates were fabricated by solution chemical method from Zn(NO₃)₂/NaOH under assisted electrical field. The working mechanism of electrical field was analyzed and the factors affecting the rod growth such as potential, precursor concentration and growth temperature were elucidated. The structural and optical properties are characterized by SEM, TEM, XRD, HRTEM and UV-vis. The results indicated that the nanorods have wurtzite structure without electrical field and are primarily of zincite structure under electrical field; when the electrical field is 1.1-1.3 V, not only the elevation of ion diffusion and adsorption lower the crystallite/solution interfacial energy and then the crystal nucleation barrier by increasing charge intensity, but also the production of H⁺ through oxidation of OH⁻ increases properly the degree of solution supersaturation near the substrate, and thus lowers the activation energy. Both the two processes do favor to rod growth. With increasing precursor concentration in this system, the average diameter and length of ZnO nanorods increase, leading to decreasing of optical transmittance. The maximum rod growth rate at given concentration of Zn²⁺ occurs at a specific temperature.