碳化硅块状气凝胶的制备及应用

碳化硅气凝胶具有高温稳定性、低热膨胀系数、良好的抗热震性以及抗氧化和耐腐蚀等优异的性质,在高温和高腐蚀性环境下的隔热、电磁吸波、过滤和吸附等领域具有较大的应用潜力。然而,块状碳化硅气凝胶的可控制备一直是一项较大的挑战。本文综述了块状碳化硅气凝胶在制备工艺和应用两个方面的研究进展,首先分析总结了各种制备工艺及其优缺点,包括有机/SiO₂复合气凝胶碳热还原法、预陶瓷化聚合物裂解法、化学气相沉积法、高温气相渗硅法和碳化硅纳米线组装法;然后,详细介绍了碳化硅气凝胶在高温隔热和电磁吸波两个领域的应用研究进展;最后,展望了碳化硅气凝胶未来的若干发展方向。     

Protein release from interpenetrating polymer network hydrogels triggered by endogenous biomarkers

A biocompatible drug delivery system with a high-sensitive stimuli-responsive behavior is reported. Calcium alginate hydrogels interpenetrated with polyvinyl alcohol–diboronate polymer network (IPN) effectively respond to the presence of hydrogen peroxide through oxidative degradation of boronate esters. The degradation of the IPN entails the reopening of the original alginate pores, resulting in a 5–9 times increase in release rates of encapsulated proteins with molecular masses ranging from 16.7 to 66 kDa. The release can be triggered by hydrogen peroxide concentrations as low as 50 μM in the bulk solution. Alternatively, hydrogen peroxide can also be generated inside the hydrogels by incorporation of oxidase enzymes in the presence of their substrates, such as lactate, glucose, or hypoxanthine, which can serve as biomarkers of certain physiological disorders.     

Recycling of Primary Lithium Batteries Production Residues

Production waste of primary lithium batteries constitutes a considerable secondary lithium feedstock. Although the recycling of lithium batteries is a widely studied field of research, the metallic residues of non-rechargeable lithium battery production are disposed of as waste without further recycling. The risks of handling metallic Li on a large scale typically prevent the metal from being recycled. A way out of this situation is to handle Li in an aqueous solution, from where it can be isolated as Li₂CO₃. However, the challenge in hydrometallurgical treatment lies in the high energy release during dissolution and generation of H₂. To reduce these process-related risks, the Li sheet metal punching residues underwent oxidative thermal treatment from 300 to 400 °C prior to dissolution in water. Converting Li metal to Li₂O in this initial process step results in an energy release reduction of ∼70 %. The optimal oxidation conditions have been determined by experimental design varying three factors: temperature, Li metal sheet thickness, and residence time. With 96.9±2.6 % almost the entire Li amount is converted to Li₂O, after 2.5 h treatment at 400 °C for a Li sheet thickness of 1.99 mm. Final precipitation with CO₂ yields 85.5±3.0 % Li₂CO₃. Using pure Li sheets, the product Li₂CO₃ is obtained in battery-grade quality (>99.5 %). Non-precipitated Li is recirculated into the process on the stage of dissolving Li₂O, thus avoiding loss of material.     

Influence of Carbon Nanotubes on Phase Composition,Thermal and Post-Heating Behavior of Cementitious Composites

This paper experimentally investigates the influence of carbon nanotubes (CNTs) on phase composition, microstructure deterioration, thermal behavior, and residual mechanical strengths of cementitious composites exposed to elevated temperatures. Cement mortars with small dosages of CNTs, 0.05% and 0.2% by weight of cement, were prepared and then heated at 25 °C, 150 °C, 200 °C, 450 °C, and 600 °C for two hours before being tested. The results show positive impact of the CNTs on the hydration process of cement mortar at room temperature and at higher temperatures up to 200 °C. Decomposition of the hydration products is obvious at 450 °C, whereas sever deterioration in the microstructure occurs at 600 °C. The nano reinforcement and bridging effect of the CNTs are obvious up to 450 °C. Thermal behavior characterization shows that CNTs incorporation enhances the thermal conductivity of the unheated and heat-treated mortar specimens. The decomposition of the hydration products needs more heat in the presence of CNTs. Finally, presence of CNTs significantly enhances the residual compressive and flexural strengths of heated mortar specimens for all studied temperatures.     

Impact of the Type of Crosslinking Agents on the Properties of Modified Sodium Alginate/Poly(vinyl Alcohol) Hydrogels

Here, we report on studies on the influence of different crosslinking methods (ionic and chemical) on the physicochemical (swelling ability and degradation in simulated body fluids), structural (FT-IR spectra analysis) and morphological (SEM analysis) properties of SA/PVA hydrogels containing active substances of natural origin. First, an aqueous extract of Echinacea purpurea was prepared using a Soxhlet apparatus. Next, a series of modified SA/PVA-based hydrogels were obtained through the chemical crosslinking method using poly(ethylene glycol) diacrylate (PEGDA, M_n = 700 g/mol) as a crosslinking agent and, additionally, the ionic reaction in the presence of a 5% w/v calcium chloride solution. The compositions of SA/PVA/E. purpurea-based hydrogels contained a polymer of natural origin—sodium alginate (SA, 1.5% solution)—and a synthetic polymer—poly(vinyl alcohol) (PVA, M_n = 72,000 g/mol, 10% solution)—in the ratio 2:1, and different amounts of the aqueous extract of E. purpurea—5, 10, 15 or 20% (v/v). Additionally, the release behavior of echinacoside from the polymeric matrix was evaluated in phosphate-buffered saline (PBS) at 37 °C. The results indicate that the type of the crosslinking method has a direct impact on the release profile. Consequently, it is possible to design a system that delivers an active substance in a way that depends on the application.     

基于i-motif的生物医学应用纳米系统:pH成像、药物控释和肿瘤诊疗

I-motif作为一种新型pH敏感元件,因其在不同pH条件下可以进行快速的构象转变,以及具有自动化合成、优异的生物相容性和灵活的功能化整合等优点,在生物医学领域引起了广泛的关注和研究热潮.该文介绍了i-motif的基本性能,综述了基于i-motif的纳米系统在细胞pH成像、pH控制的药物释放和pH响应型肿瘤诊疗一体化等...     

基于3-羧基-5-氨基-1，2，4-三唑的Cd（Ⅱ）配合物的合成、晶体结构及催化性能

三唑类含能配合物在含能材料领域受到广泛关注。利用溶液法合成了一例含能配合物[Cd （Hatzc）₂（H₂O）]（LH1）,其中H₂atzc=3-羧基-5-氨基-1,2,4-三唑,并用X射线单晶衍射、元素分析、红外光谱等手段进行表征。单晶结构分析结果表明LH1属于单斜晶系,空间群为P2₁/n,呈一维链状结构,通过氢键相互作用形成三维超分子结构。LH1的爆速（D=10.4 km·s^-1）、爆压（p=55.2 GPa）、爆轰能量（16.51 kJ·g^-1）和密度（2.363 g·cm^-3）均优于大多数含能配合物。撞击感度（>40 J）和摩擦感度（>360 N）表明LH1对撞击和摩擦的敏感性较低。高氯酸铵（AP）的催化热分解结果表明,在LH1的催化作用下,AP的高温分解峰提前38℃,释放的热量在较短的时间增加0.46 kJ·g^-1,说明LH1对AP热分解具有良好的催化效果。     

能源与环境应用中的微波催化研究进展

微波是一种能量传递方式。与传统电加热相比,微波加热具有加热速度快、热惯性小、选择性加热等特点,因而被视为一种优质的能量来源。微波催化是一种使用微波对反应系统供能,从而推动催化反应进行的化学过程。近年来,许多研究者致力于探索和发展微波催化技术,包括利用微波技术提升化学反应速率、开发具有出色微波吸收能力的催化剂、建立节能环保的微波催化系统等。本文首先介绍了微波的相关理论,讲述了材料对微波的吸收原理;然后从微波催化降解挥发性有机物（Volatile Organic Compounds, VOCs）、微波催化污水处理、微波催化生物质热解和微波催化碳氢化合物转化等方面综述了微波催化在能源环境中的应用;最后对微波催化过程的机理展开了讨论。     

基于DFT密度泛函理论的聚酯热降解反应机理研究

本文应用密度泛函理论（DFT）研究钛系催化剂催化聚酯热降解的反应机理。分别以Ti(OEt)4化合物以及Ti(OEt)3 阳离子化合物为催化剂,探讨了二苯甲酸乙二酯（EDB）解聚反应的Lewis酸催化热降解反应机理（M1机理）和烷氧基配位催化热降解反应机理（M2机理）。结果表明,Lewis酸催化热降解反应机理在两种催化剂下的解聚反应能垒与无催化剂反应非常相似,未表现出明显促进作用;Ti(OEt)3 催化剂在M2机理中明显降低了解聚反应能垒,是聚酯热降解反应的催化活性中心。经轨道相互作用分析发现,阳离子催化剂和反应物EDB之间存在较为明显的轨道相互作用。     

以橡子为碳源制备的空心磁性碳纳米球及其吸附性能

以橡子为碳源,通过高温煅烧法制备了粒径均匀的磁性空心碳纳米球(MHCNS)。经过HCl浸泡处理可得MHCNS-1,再经HNO_3和NH_3·H_2O处理得MHCNS-2。MHCNS-2粒径均匀,直径为20～40 nm,球壁厚度为3～5 nm。MHCNS-2的尺寸可通过改变镍离子与氢氧化钾的添加量和比例进行调控。通过X射线粉末衍射、扫描电镜、透射电镜、振动样品磁强计等方法对制备的产物进行了表征,进而分析了其生长机制。MHCNS-2对于有机染料亚甲基蓝(MB)的吸附性能的实验结果表明,MHCNS-2具有强吸附性能,当MB溶液浓度为100 mg·L~(-1)时,吸附量可以达到185 mg·g~(-1)。MHCNS对布洛芬的载药释药实验结果表明,MHCNS-2载药率可达44%,释药率达70%,有着良好的载药与释药能力。