Phase transition and thermal expansion property of Cr_(2-x)Zr_(0.5x)Mg_(0.5x)Mo_3O_(12) solid solution

Compounds with the formula Cr2-xZr0.5xMg0.5xMo3O12（x = 0.0, 0.3, 0.5, 0.9, 1.3, 1.5, 1.7, 1.9） are synthesized, and the effects of Zr4＋ and Mg2＋ co-incorporation on the phase transition, thermal expansion, and Raman mode are investigated. It is found that Cr2-xZr0.5xMg0.5xMo3O12 crystallize into monoclinic structures for x 〈 1.3 and orthorhombic structures for x _〉 1.5 at room temperature. The phase transition temperature from a monoclinic to an orthorhombic structure of Cr2Mo3O12 can be reduced by the partial substitution of （ZrMg）6＋ for Cr3＋. The overall linear thermal expansion coefficient decreases with the increase of the （ZrMg）6＋ content in an orthorhombic structure sample. The co-incorporation of Zr4＋ and Mg2＋ in the lattice results in the occurrence of new Raman modes and the hardening of the symmetric vibrational modes, which are attributed to the MoO4 tetrahedra sharing comers with ZrO6/MgO6 octahedra and to the strengthening of Mo-O bonds due to less electronegativities of Zr4＋ and Mg2＋ than Cr3＋, respectively.     

Controlling the surface buckling wrinkles by patterning the material system of hard-nano-film/soft-matter-substrate

Wrinkling and buckling of nano-films on the compliant substrate are always induced due to thermal deformation mismatch.This paper proposes effective means to control the surface wrinkling of thin film on the compliant substrate,which exploits the curvatures of the curve cracks designed on the stiff film.The procedures of the method are summarized as:1)curve patterns are fabricated on the surface of PDMS(Polydimethylsiloxane)substrate and then the aluminum film with the thickness of several hundred nano-meters is deposited on the substrate;2)the curve patterns are transferred onto the aluminum film and lead to cracking of the film along the curves.The cracking redistributes the stress in the compressed film on the substrate;3)on the concave side of the curve,the wrinkling of the film surface is suppressed to be identified as shielding effect and on the convex side the wrinkling of the film surface is induced to be identified as inductive effect.The shielding and inductive effects make the dis-ordered wrinkling and buckling controllable.This phenomenon provides a potential application in the fabrication of flexible electronic devices.     

Q波段回旋行波管宽带高平均功率输出窗设计与热分析

利用场匹配理论建立传输级联矩阵的方法对多层窗片结构输出窗进行研究,通过大量的数值计算给出Q波段回旋行波管一种新型中间风冷结构输出窗的参数,然后通过数值计算和HFSS仿真验证,该新型输出窗在46~50 GHz范围内,S11反射系数小于-20 dB。在此基础上进一步对该输出窗进行热分析,热分析表明：新型输出窗窗片中心与边缘温差与传统输出窗相比大幅下降,热应力大大减小,提高了输出窗的功率容量。回旋行波管工作在TE01模式时,新型输出窗获得的最大饱和功率容量达到90 kW,与传统输出窗相比,功率容量提高了21.8 kW。     

Expected thermal deformation and wavefront preservation of a cryogenic Si monochromator for Cornell ERL beamlines

Cornell energy‐recovery linac (ERL) beamlines will have higher power density and higher fractional coherence than those available at third‐generation sources; therefore the capability of a monochromator for ERL beamlines has to be studied. A cryogenic Si monochromator is considered in this paper because the perfect atomic structure of Si crystal is needed to deliver highly coherent radiation. Since neither the total heat load nor the power density alone can determine the severity of crystal deformation, a metric called modified linear power density is used to gauge the thermal deformation. For all ERL undulator beamlines, crystal thermal deformation profiles are simulated using the finite‐element analysis tool ANSYS, and wavefront propagations are simulated using Synchrotron Radiation Workshop. It is concluded that cryogenic Si monochromators will be suitable for ERL beamlines in general.     

Microwave cavity perturbation technique: Part III: Applications

The resonant cavity perturbation method as described in the preceding two parts of this series is applied to study the electrodynamical properties of different materials in the microwave and millimeter wave spectral range. We briefly discuss the relevant uncertainties which are asociated with the different measurement techniques and we find that employing the amplitude technique it is possible to measure both the width and frequency to nearly the same precision. We then demonstrate the broad range of applicability of this technique by showing results obtained on several different materials, ranging from an insulator to a superconductor. The performance limitations of this technique are discussed in detail.     

New formulation of restricted growth processes

We present a new formulation of a class of growth models-those which evolve according to an exclusion process. This formulation is based upon a transformation of the probability distribution function which involves Grassmann variables. This method is very general and enables one to derive an exact stochastic differential equation for the model of interest. We describe this method using the traffic model as an example.     

Ti扩散铌酸锂光波导特性的热固定技术

在Ti扩散铌酸锂光波导中,因光致折变效应而导致光波导特性漂移.在光波相干性的导波光学器件中,光致折变效应的影响尤为严重.本文报道了稳定光致折变效应的热固定技术实验结果;并提出在光波导特性的热固定过程中,不是H~+离子起主导作用这一看法.     

纯热传导冷却产生软X射线激光

本文通过n_e=1×10~(19)cm~(-3)的热等离子体,在纯热传导冷却机制下的计算,得到了等离子体温度的时空变化,并运用碰撞-辐射模型计算了在这种条件下,类锂铝离子4f-3d,5f-3d跃迁的增益系数,计算表明:只要有合适的初始条件,用纯热传导冷却机制,也能产生软X射线激光增益.     

阿尔芬波加热托卡马克等离子体的能量平衡问题

本文用“剖面不变性”确定等效电子热导系数,研究了TCA装置上阿尔芬波加热的能量平衡,结果与实验符合很好。证明本文所用的方法对不同装置、不同加热方式都适用。     

微合金化元素对Fe—A1界面结合的第一性原理研究

利用第一性原理中的DFT理论研究了Fe／A1界面的能量学和电子结构，讨论了替位型掺杂的元素Zn、Mn、Ni在Fe／A1界面处的作用．结果表明：元素Zn、Mn、Ni都会优先替换界面处的Fe原子，使得界面结合能增加，体系更稳定，有利于界面的结合；跨界面的Fe原子与Al原子之间的电荷布居、键长以及差分电荷密度图的计算表明：掺杂后有利于跨界面的Fe-Al间成键，从而加强了Al层与Fe基体的结合，且结合强度由强到弱依次为：掺Zn〉掺Mn〉掺Ni；与实验比较吻合．最后对掺杂Zn的增韧机理加以解释．