中国银行间拆借利率扩散模型的极大拟似然估计

本文用极大拟似然估计法估计了中国银行间市场七天拆借利率扩散模型的参数。并用自助法对众多不同的模型进行了广义拟似然比检验。结论表明:中国货币市场利率具有均值回复效应:利率敏感系数γ值为1.421265,对利率水平具有较高敏感性。     

一类利用回归关系的计量指标抽样方案

在产品质量判定的抽样检验问题中,当目标指标需用破坏性试验才能得其值时,更为常用的是用非破坏性试验可得量值的协变指标量来预报它。但在产品抽样验收问题上,未能形成理论较为严密的方法,这是由于预报误差这个关键问题的处理尚未解决得好,即给不出抽样方案的功效计算的正确或是近似性较好的公式。本文通过建立合理的数学模型,把对目标指标的质量要求化为对协变指标量的统计要求,从而利用两者的回归关系,结合两种复杂的抽样方案,给出功效函数的计算公式和计算方法,并进行了分析。     

大非球面镜的郎奇检验灵敏度理论研究及仿真分析

为了研究等间距直线条光栅的周期及其他相关参数的变化对大非球面镜朗奇检验法的影响,提出了一种评估郎奇检验灵敏度大小的新方法。其检验灵敏度定义为一个光栅周期所能检测到的镜面偏差大小能力。在朗奇检验的几何原理基础上,利用光线追迹法讨论了镜面偏差与朗奇光栅周期之间的关系,并以此推导出检验灵敏度公式,计算了抛物面镜的朗奇检测灵敏度。分析结果表明,如果给定镜子的规格参数及检验光路,朗奇检验灵敏度分别随着光栅周期间隔和半通光口径的变大而减小。     

孔梯度陶瓷纤维复合膜管的制备及特性

陶瓷过滤管具有孔隙率高、耐腐蚀、耐高温、机械强度高、便于清洗、使用寿命长等优点,是高温烟尘处理用的高效过滤元件.本文研制了一种具有梯度孔结构堇青石陶瓷纤维复合膜过滤元件,该过滤元件是由多孔支撑体、过渡层和分离膜层组成.其中支撑体、过渡层和分离层的气孔率分别为35～40;、50～60;和60～70;.文中主要分析了孔梯度陶瓷纤维复合膜管的材料结构和抗热震性能,同时对复合膜管进行含尘气体过滤的冷态模拟试验.对于烟气中粒径大于或等于0.1μm的颗粒,复合膜管的截留率达到99.8;以上.     

Evaluation of Water Ammonium Ion Test Kit and Its Feasibility for the Analysis of Protein in Food

The traditional method for the determination of protein in food needs the operations of digestion, distillation, absorption, and titration; therefore, it is complicated and time-consuming and requires professional personnel. Is there a more convenient and faster detection method that can directly determine the ammonium ions in protein digestion solution to obtain the protein content of food and avoid the distillation–absorption–titration process? The feasibility of water ammonium ion test kits for food protein rapid detection was discussed here. After digestion, the protein in food transforms into ammonium ions in the digestion solution. Because of the variety of food, there are many different inorganic ions left in the food digestion solution, and at the same time, digestion agents are added in the digestion process and become potential interference factors in ammonium determination. Therefore, the detection accuracy of ammonium test kits needs to be evaluated first, including their anti-interference ability. The standard curve of ammonium was established by the test kit. When the ammonium concentration was 0.00–2.50 mg/L, the absorbance at 620 nm was linearly related to the ammonium concentration, the determination coefficient R² was 0.9995, and the detection limit of this method was 0.01 mg/L. The influences of temperature, pH value, and reaction time on the test kit method were discussed. The precision was 0.90–3.33%; the repeatability was 1.71–4.86%; and the recovery rate of tap water, river water, and sea water was controlled within 90–103%. The anti-interference ability of the evaluated test kit was better than that of the national standard detection method. The test kit, combined with sample pretreatment and protein conversion formula, was used to detect protein in different types of food (milk powder, rice flour, wheat flour, soy, banana, milk, fish food, chicken food, and dog food). The results showed that there were no significant differences (ρ > 0.05) between the national method and the test kit method. The ammonium ion test kit method shortened the determination time and had higher sensitivity, showing its potential for the rapid determination of food protein.     

坝前淤泥土与新填坝体接触面抗剪强度试验研究及工程应用

坝前淤泥面与新填筑坝体接触面是"坝前淤泥面加坝"技术的薄弱环节.为了探究不同工况下淤泥坝基、新填筑坝体,以及淤泥土-新填土接触面的剪切强度特性,以宁夏南部山区西吉县南川水库坝前淤泥面加坝工程为研究对象,通过常规应变式直剪仪、改进常规应变式直剪仪分别进行剪切试验,分析了淤泥土含水率和压实度变化时,淤泥土、新填土、淤泥土-...     

直接解调方法在嫦娥一号卫星X射线谱仪地面验证实验数据分析中的应用

"嫦娥一号"卫星是我国的第一颗月球探测卫星,运行轨道高度为200 km,预计工作寿命为一年,其上配备的X射线成像谱仪具备了对月表进行X射线探测、成像和对太阳X射线进行监测的功能.该X射线谱仪由两个全同的探测器阵列组成,其中,为了实现对月表主要化学元素分布及其含量进行探测的科学目标,在每个探测器阵列还配备了2个低能探测器单元.这4路低能探测器单元的面积为25 mm2,采用的都是厚度为500 μm,具有优良探测性能的Si-PIN探测器,其探测能区为1～10 keV,能量分辨率为～5%@5.9 kev.文章主要介绍了嫦娥一号卫星X射线谱仪的地面验证实验,并且根据X射线谱仪的能量响应矩阵,利用直接解调方法和基本参数法对X射线谱仪地面验证实验中的探测数据,特别是对盲测样品中的Mg,Al,Si等元素进行了定性和定量分析.     

低速气流三参数动态测量软件初探

本文采用虚拟仪器概念和技术,构建了三孔探针动态测量系统。该系统集成了高速数据采集、储存及现代数据处理模块,通过该系统可动态显示低马赫数下压气机内部流场的总压、静压、速度矢量等物理参数的变化趋势,并可对动态信号进行时域显示和频域分析。系统还具备自动标定、零漂消除及线性度拟合的功能,实现了流场动态测试技术在线处理与测试同步进行的目的。     

激光电源中基于EXB841的IGBT驱动电路设计

根据IGBT对驱动电路的各项要求,在采用专用驱动模块EXB841及带有过流保护功能的驱动电路的基础上,设计了简化的IGBT驱动电路,并提出了构建实际驱动电路的注意事项。通过对PWM信号、IGBT动态驱动信号、IGBT开通时驱动信号上升沿、IGBT关断时驱动信号下降沿等波形的实际观测,表明此驱动电路工作正常。该驱动电路已用于某型脉冲固体激光电源中,运行良好,可靠性较高。     

C波段加速器初步热测实验

为了开展加速器小型化技术研究,进行了C波段2 MeV驻波加速器研制工作。目前,该加速器研制取得了显著进展,完成了全密封加速管的焊接,建立了加速器热测实验平台。在重复频率50 Hz情况下,进行了初步热测出束实验,利用电离室剂量仪测试了加速器靶前1 m处的X射线剂量率,并利用钢吸收法测试了电子束的能量。初步实验结果表明:电子束能量约2.5 MeV,剂量率超过330 mGy/(minm)。