Controllable donor-acceptor neutral [2]rotaxanes

In pursuit of a neutral bistable [2]rotaxane made up of two tetraarylmethane stoppers--both carrying one isopropyl and two tert-butyl groups located at the para positions on each of three of the four aryl rings--known to permit the slippage of the pi-electron-donating 1,5-dinaphtho[38]crown-10 (1/5DNP38C10) at the thermodynamic instigation of pi-electron-accepting recognition sites, in this case, pyromellitic diimide (PmI) and 1,4,5,8-naphthalenetetracarboxylate diimide (NpI) units separated from each other along the rod section of the rotaxane's dumbbell component, and from the para positions of the fourth aryl group of the two stoppers by pentamethylene chains, a modular approach was employed in the synthesis of the dumbbell-shaped compound NpPmD, as well as of its two degenerate counterparts, one (PmPmD) which contains two PmI units and the other (NpNpD) which contains two NpI units. The bistable [2]rotaxane NpPmR, as well as its two degenerate analogues PmPmR and NpNpR, were obtained from the corresponding dumbbell-shaped compounds NpPmD, PmPmD, and NpNpD and 1/5DNP38C10 by slippage. Dynamic 1H NMR spectroscopy in CD2Cl2 revealed that shuttling of the 1/5DNP38C10 ring occurs in NpNpR and PmPmR, with activation barriers of 277 K of 14.0 and 10.9 kcal mol(-1), respectively, reflecting a much more pronounced donor-acceptor stabilizing interaction involving the NpI units over the PmI ones. The photophysical and electrochemical properties of the three neutral [2]rotaxanes and their dumbbell-shaped precursors have also been investigated in CH2Cl2. Interactions between 1/5DNP38C10 and PmI and NpI units located within the rod section of the dumbbell components of the [2]rotaxane give rise to the appearance of charge-transfer bands, the energies of which correlate with the electron-accepting properties of the two diimide moieties. Comparison between the positions of the visible absorption bands in the three [2]rotaxanes shows that, in NpPmR, the major translational isomer is the one in which 1/5DNP38C10 encircles the NpI unit. Correlations of the reduction potentials for all the compounds studied confirm that, in this non-degenerate [2]rotaxane, one of the translational isomers predominates. Furthermore, after deactivation of the NpI unit by one-electron reduction, the 1/5DNP38C10 macrocycle moves to the PmI unit. Li+ ions have been found to strengthen the interaction between the electron-donating crown ether and the electron-accepting diimide units, particularly the PmI one. Titration experiments show that two Li+ ions are involved in the strengthening of the donor-acceptor interaction. Addition of Li+ ions to NpPmR induces the 1/5DNP38C10 macrocycle to move from the NpI to the PmI unit. The Li+-ion-promoted switching of NpPmR in a 4:1 mixture of CD2Cl2 and CD3COCD3 has also been shown by 1H NMR spectroscopy to involve the mechanical movement of the 1/5DNP38C10 macrocycle from the NpI to the PmI unit, a process that can be reversed by adding an excess of [12]crown-4 to sequester the Li+ ions.     

Molecular structure of potassium [N,N′-bis(salicylideneamino)nitroguanidonate-N,N′,-O,O′]nickel(ii), the product of condensation of (salicylideneamino)nitroguanidine with salicylaldehyde on a Ni2+ ion template

The crystal structure of the product of the condensation of (salicylideneamino)nitroguanidine with salicylaldehyde on a Ni²⁺ ion template, K[Ni(C₁₅H₁₀N₅O₄)] · DMF, has been studied. It was established that a planar Ni complex, consisting of isolated [NiL]^– anions and solvated [K⁺ · DMF] cations, is formed. The negative charge of the anion is localized mainly on the O atoms of the nitro group. The nitroguanidine fragment of the ligand occurs in the tautomeric form, which was not reported previously.Deceased in 1995Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2273–2277, September, 1996.     

Simultaneous deposition of Ni nanoparticles and wires on a tubular halloysite template: A novel metallized ceramic microstructure

Tubular halloysite can be used as a template to fabricate a novel metallized ceramic microstructure through electroless plating. Reduction of Pd ions by methanol is conducted to initiate Ni plating. There is a simultaneous deposition of Ni nanoparticles on the outer surface and discontinuous wires in the lumen site of the halloysite template obtained. The different deposition could be caused by the different composition distribution of ferric oxide impurity in the wall due to the isomorphic substitution during the formation of halloysite template. Its magnetic property is mainly attributed to the Ni nanoparticles, not the wires. The metallized ceramic microstructure has the potential to be utilized as a novel magnetic material.     

Mesoporous Titanium-containing Silicas. Synthesis and geometrical characteristics

Mesoporous titanium-containing silicas with TiO₂ contents from 1 up to 70 mol% were prepared. The obtained samples have been characterized by the powder X-ray diffraction data, the diffuse reflectance infrared Fourier transform method, and nitrogen adsorption at 77 K. Specific surface area, total pore volume, distribution pore volume on pore sizes were determined from nitrogen adsorption isotherm for synthesized titanosilicas. This revised version was published online in August 2006 with corrections to the Cover Date.     

Fabrication of Large‐Scale Hierarchical ZnO Hollow Spheroids for Hydrophobicity and Photocatalysis

We report here the preparation of a crystalline, pure hexagonal phase of ZnO as hollow 500–800 nm spheroids in the presence of organic bases, such as pyridine, using zinc acetate as the precursor salt. The spheroids exhibit unique 3D hierarchical architectures, like cocoons, and demonstrate improved superhydrophobic (water contact angle, 150°) character due to the inherited air‐trapped capillarity within the cocoon structure. The simple synthetic strategy used in this process is modified hydrothermolysis (MHT), which represents a general approach and may contribute to the formation mechanism of the hollow nanostructures with highly improved porosity. Depending on the concentration of the precursor salt, it has been possible to cover glass plates or the inner wall of a reaction vessel with ZnO nanocrystals. A low salt concentration (<0.01 M ) allows the easy preparation of a superhydrophobic glass surface, whereas a high salt concentration (>0.01 M ) results in the precipitation of cocoons at the bottom of the reaction vessel as a solid mass together with a deposited thin film of ZnO nanocrystals covering the inner wall of the glass vessel. The thickness of the film successively grows through repetitive hydrothermolysis processes for which a low salt concentration (<0.01 M ) was employed. Because of the hollow cocoonlike morphology, the surface area of the film is greatly increased, which makes it accessible for functionalization by incoming substrates from both sides (internally and externally) and helps to drive a competent photocatalytic dye degradation pathway. The heterocyclic base pyridine exclusively develops cocoons. Thus, the mechanism of self‐aggregation of ZnO nanocrystals under MHT reaction conditions has been studied and the characterization of the compounds has been supported with physical measurements.     

有机发光分子在聚苯胺微结构上的选择性吸附

我们将有机发光分子选择性地吸附在PANI结构上形成有机发光图案, 作为诱导模板聚苯胺的结构可以通过纳米压印和沉积相结合的方法制备. 通过在PANI 结构的空隙处修饰氟代硅烷增大样品表面不同区域的亲疏水差异, 从而诱导有机发光分子的选择性吸附.     

圆盘状a-Co(OH)2的控制合成及其电化学性能

采用AAO模板及后处理方法合成了圆盘状a-Co(OH)2并研究了其电化学电容性能.在该合成方法中,先采用阳极氧化铝模板结合交流电沉积的方法获得钴纳米线,而后将其在碱液中通过溶解氧氧化生成终端产物.用红外光谱(FT-IR),X射线衍射(XRD)和场发射扫描电子显微镜(FE-SEM)表征了产物的结构和形貌;用循环伏安、恒电流充放电测试方法对其电化学性能进行了测试.此外,对圆盘状Co(OH)2的形成机理进行了初步探讨.结果表明,用此方法合成的Co(OH)2具有圆盘状形貌,属a相态,且表现出较好的电容特性.