萘基相互连接的多孔碳纳米囊的制备及超电容性能

以萘为碳源, 采用MgO模板诱导耦合KOH裁剪技术制备了相互连接的多孔碳纳米囊(ICNC). 结果表明所制备的ICNC₂具有大的比表面积(1811 m²/g)、 高的压实密度(1.38 g/cm³)和微孔孔容含量(58.93%). 在对称的超级电容器(SC)中, ICNC₂电极的体积比容在不同电流密度下分别高达420.8 F/cm³(0.069 A/cm³)和315 F/cm³(27.6 A/cm³), 容量保持率为74.82%. 在38 W/L功率密度下, ICNC₂基SC的体积能量密度为14.6 W?h/L. 经过20000次循环后, 其体积比容仅衰减1.4%, 库伦效率为99.1%, 为从萘基小分子制备储能用功能碳材料提供了一种可行的方法.     

利用模板法制备Ag纳米线

利用阳极氧化铝（AAO）作为模板,制备出高定向的Ag纳米线．Ag纳米线的形貌由环境扫描电镜证实,并通过X-射线能谱（EDX）、X-射线粉末衍射谱（XRD）测试手段进行了表征．     

Conducting poly(aniline) nanotubes and nanofibers: controlled synthesis and application in lithium/poly(aniline) rechargeable batteries

The primary aim of this work was to synthesize aligned perchloric-acid-doped poly(aniline) (HClO(4)-doped PANI) nanotubes by a simple alumina template method and to investigate their application in lithium/poly(aniline) rechargeable batteries. Powder X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier transform infrared (FTIR) analysis were used to characterize the nanostructures obtained. The second aim addressed the preparation of HClO(4)-doped PANI microspheres and nanofibers on a large scale through a modified spraying technique, since the template synthesis has limitations in mass production. The present synthesis methods are simple and can be extended to the preparation of a broad range of one-dimensional conductive polymers. Furthermore, electrochemical measurements showed that the as-prepared HClO(4)-doped PANI nanotubes exhibit better electrode performances than their commercial counterparts because they possess more active sites, higher conductivity, and relative flexibility. This indicates that HClO(4)-doped poly(aniline) nanomaterials are promising in the application of lithium/polymer rechargeable batteries.     

p,p′-芳炔桥连的四联萘拓扑环芳分子的设计与合成

基于联萘衍生物手性构型高度稳定的特点, 以光学活性的(R)-2,2'-二乙炔基-1,1'-联萘为模板, 设计了3个有趣的拓扑环芳分子——含有4个手性联萘单元的(R,R,R,R)-2a～2c, 并探讨了它们的合成. 合成路线涉及三甲基硅(Me₃Si-)保护基的控制导入, 对位取代的芳基连接桥的链接, 保护基的脱去以及分子间偶合成环4个步骤. 用比旋光度([α]_D), MS, IR, UV-Vis, ¹H和¹³C NMR以及元素分析表征了这些化合物.     

Synthesis,Characterization and DFT Calculation of a New Silver(I) Iodid Templated by Conjugated Cation:(ipq)_4Ag_4I_8

1 INTRODUCTION The construction and characterizations of low dimensional inorganic/organic hybrid materials have increasingly attracted the interest of chemists duo to their unusual topologies and relevance in a wide range of applications in materials science including transport, magnetic materials, catalysts, and lumi- nescent materials[1]. Among the various families of hybrid functional materials, the family of metal halides is an important one. As a branch of the metal halides, silver(…     

表面图案化磁性复合微球的原位制备与表征

采用反相悬浮聚合法合成了丙烯酸(AA)含量不同的N-异丙基丙烯酰胺-丙烯酸共聚物P(NIPAM-co-AA)微凝胶, 并以其作为微反应器, 通过原位外源沉积法制备了一系列微米级、表面具有图案化结构的SiO₂-Fe₃O₄-P(NIPAM-co-AA)磁性复合微球. 实验结果表明, 复合微球的表面结构与微凝胶的组成、Fe₃O₄和SiO₂的沉积量有关. 在微球表面进行修饰, 可得到表面带有氨基等官能基团的磁性复合材料. 将这种功能化磁性微球用于识别生物大分子并进一步用于生物医学领域具有重要的意义.     

Synthesis of polymers by template polymerization. I. Template polymerization of poly(methacrylic acid) with β‐cyclodextrin

A novel template monomer with multiple methacryloyl groups was synthesized with β‐cyclodextrin by the acetylation of primary hydroxyl groups and the esterification of secondary hydroxyl groups with methacrylic acid anhydride. The average number of methacryloyl groups in the monomer was 11. The radical polymerization of the monomer was carried out with the following initiators: α,α′‐azobisisobutylonitrile, H₂O₂? Fe²⁺ redox initiator, p‐xylyl‐N,N‐dimethyldithiocarbamate (XDC), and α‐bromo‐p‐xylyl‐N,N‐dimethyldithiocarbamate (BXDC). When the concentration of the monomer was less than 4.12 × 10^?3 M, polymerization was limited inside the molecule, and gelation of the system was hindered. For controlled radical photopolymerization with XDC and BXDC, the methacryloyl groups of the monomer were homogeneously polymerized, and poly(methacrylic acid) with a narrow molecular weight distribution was obtained by the hydrolysis of the polymerized products. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3539–3546, 2001     

新型Salen型配合物的合成和表征及轴向配位热力学

采用金属模板法合成了四个新型Salen型单、双核金属配合物,并用元素分析、核磁共振(1HNMR)、电喷雾质谱(ESI-MS)、傅里叶变换红外光谱(FT-IR)等手段进行了表征.使用紫外-可见(UV-Vis)光谱滴定法和圆二色(CD)光谱研究了主体金属镍配合物与咪唑类含氮小分子的轴向配位反应热力学性质.结果表明:主体与咪唑(Im)和N-甲基咪唑(N-MeIm)的配位数是2,而与2-Et-4-MeIm和2-MeIm的配位数是1;轴配体系的热力学数据显示主体与咪唑类配体的平衡常数按K苓(Im)K苓(N-MeIm)K苓(2-Et-4-MeIm)K苓(2-MeIm)顺序依次减小;测得的△rHm苓和△rSm苓数据表明该轴向配位反应为放热、熵增加过程.     

有机发光分子在聚苯胺微结构上的选择性吸附

我们将有机发光分子选择性地吸附在PANI结构上形成有机发光图案, 作为诱导模板聚苯胺的结构可以通过纳米压印和沉积相结合的方法制备. 通过在PANI 结构的空隙处修饰氟代硅烷增大样品表面不同区域的亲疏水差异, 从而诱导有机发光分子的选择性吸附.