Preparation and characterization of dendrimer-star PNIPAAM using dithiobenzoate-terminated PPI dendrimer via RAFT polymerization

Two dendritic reversible addition-fragmentation transfer (RAFT) agents with 8 and 16 terminal dithiobenzoate (DTB) groups on the surface of poly(propylene imine) (PPI) dendrimers (generation 2.0 and 3.0, respectively) were successively prepared, and they were used in the RAFT polymerization of N-isopropylacrylamide (NIPAAM). The polymerization kinetics was confirmed to pseudo-first-order behavior. The ¹H NMR and GPC analyses show that the dendrimer-star den (NIPAAM)_x (x = 8 or 16) prepared by RAFT method has well-defined structure, controlled molecular weight and low polydispersities (PDI < 1.3). The aqueous solution prepared from dendrimer-star PNIPAAM showed reversible changes in optical properties: transparent below a lower critical solution temperature (LCST) and opaque above the LCST.     

电爆炸箔断路开关的理论和实验研究

 采用金属箔电爆炸过程的二维数值计算模型，对含电爆炸金属箔断路开关的电感储能脉冲功率调节系统进行了数值计算。以此为基础，研制出了一种低电感型的电爆炸箔断路开关，并以4μF/75kV脉冲电容器组作为初级能源，13Ω电阻作为负载进行实验研究。研究结果表明：在负载上可获得约250kV，脉宽大于400ns的脉冲电压。     

全自动高温水解-离子色谱法测定氧化镧铈中氟、氯

为探究稀土氧化物中氟(F)和氯(Cl)元素含量的快速检测方法,通过全自动高温水解仪对氧化镧铈样品进行前处理,并利用氢氧根体系离子色谱仪检测吸收液中F-、Cl-离子的含量,建立了基于全自动高温水解-离子色谱法测定氧化镧铈中的F、Cl元素含量的快速检测方法,该方法有效避免了传统前处理方法过程复杂、分析时间慢、极易受人为干扰的问题。称取0.3g氧化镧铈样品,在氧气流量为300 mL/min,1100 ℃高温下水解燃烧20 min,吸收定容为体积20mL的吸收液,以NAOH(15mmol/L)作为淋洗液,经色谱柱分离,测得F-与Cl-在质量浓度为1.00 mg/L-15.00 mg/L范围内,质量浓度与离子色谱峰面积呈线性关系,相关系数均为0.9999。检出限分别为0.003mg/L和0.12mg/L。全自动高温水解仪联用离子色谱仪检测系统对氧化镧铈中F-的平均加标回收率测定结果为98.4%,标准偏差RSD为0.94%;对Cl-的加标回收率测定结果为97.8%,RSD为2.86%。说明该方法较高准确度及精密度,测试结果准确可靠满足企业和检测机构的测试需求,为稀土氧化中氟、氯元素含量的研究及相关产品的开发提供了理论基础。     

DSC,FT-IR and NIR with Chemometric Assessment Using PCA and HCA for Estimation of the Chemical Stability of Oral Antidiabetic Drug Linagliptin in the Presence of Pharmaceutical Excipients

Pharmaceutical excipients should not interact with active substances, however, in practice, they sometimes do it, affecting the efficacy, stability and safety of drugs. Thus, interactions between active substances and excipients are not desirable. For this reason, two component mixtures of oral antidiabetic drug linagliptin (LINA) with four excipients of different reactivity, i.e., lactose (LAC), mannitol (MAN), magnesium stearate (MGS) and polyvinylpyrrolidone (PVP), were prepared in a solid state. A high temperature and a high humidity of 60 °C and 70% RH, respectively, were applied as stressors in order to accelerate the potential interactions between LINA and excipients. Differential scanning calorimetry (DSC) as well as Fourier transform infrared (FT-IR) and near infrared (NIR) spectroscopy were used to estimate the changes due to potential interactions. In addition, chemometric computation of the data with principal component analysis (PCA) and hierarchical cluster analysis (HCA) was applied to adequately interpret the findings. Of the excipients used in the present experiment, all of them were not inert in relation to LINA. Some of the interactions were shown without any stressing, whereas others were observed under high-temperature/high-humidity conditions. Thus, it could be concluded that selection of appropriate excipients for LINA is very important question to minimize its degradation, especially when new types of formulations with LINA are being developed and manufactured.     

A Fault Detection Method for Electrohydraulic Switch Machine Based on Oil-Pressure-Signal-Sectionalized Feature Extraction

A turnout switch machine is key equipment in a railway, and its fault condition has an enormous impact on the safety of train operation. Electrohydraulic switch machines are increasingly used in high-speed railways, and how to extract effective fault features from their working condition monitoring signal is a difficult problem. This paper focuses on the sectionalized feature extraction method of the oil pressure signal of the electrohydraulic switch machine and realizes the fault detection of the switch machine based on this method. First, the oil pressure signal is divided into three stages according to the working principle and action process of the switch machine, and multiple features of each stage are extracted. Then the max-relevance and min-redundancy (mRMR) algorithm is applied to select the effective features. Finally, the mini batch k-means method is used to achieve unsupervised fault diagnosis. Through experimental verification, this method can not only derive the best sectionalization mode and feature types of the oil pressure signal, but also achieve the fault diagnosis and the prediction of the status of the electrohydraulic switch machine.     

工作气压对磁控溅射ITO薄膜性能的影响

工作气压在ITO薄膜的制备过程中是一个重要的工艺参数,直接决定着薄膜的性能.本文利用射频磁控溅射方法,采用氧化铟锡陶瓷靶材,在衬底温度为175℃,工作气压范围为0.45～1.0 Pa条件下,制备了氧化铟锡透明导电薄膜.研究了工作气压对其微观结构、表面形貌和光电特性的影响.在衬底温度为175℃、纯氩气中制备的氧化铟锡薄膜电阻率为3.04 ×10-4 Ω·cm、可见光波段(400～800 nm)透过率为91.9;,适合用作异质结太阳电池的前电极和减反射膜.     

温度变化导致航天相机光学系统像面位移的研究

温度变化导致的像面位移会影响航天相机光学系统的成像质量。根据高斯光学理论,推导出了温度变化时的相机光学系统的像面位移公式,确定了温度敏感性最低的主、次反射镜的材料及与之相匹配的镜筒材料。最后计算和比较了在不同温度变化时的光学系统的传递函数。     

Multi-State Second-Order Nonlinear Optical Switches Incorporating One to Three Benzazolo-Oxazolidine Units: A Quantum Chemistry Investigation

This contribution employs quantum chemistry methods to describe the variations of the second nonlinear optical responses of molecular switches based on benzazolo-oxazolidine (BOX) units, connected by π-linkers, along their successive opening/closing. Under the fully closed forms, all of them display negligible first hyperpolarizability (β) values. When one BOX is opened, which is sketched as C→O, a push–pull π-conjugated segment is formed, having the potential to enhance β and to set the depolarization ratio (DR) to its one-dimensional-like value (DR = 5). This is observed when only one BOX is open, either for the monoBOX species (C→O) or for the diBOX (CC→CO) and triBOX (CCC→CCO) compounds, i.e., when the remaining BOXs stay closed. The next BOX openings have much different effects. For the diBOXs, the second opening (CO→OO) is associated with a decrease of β, and this decrease is tuned by controlling the conformation of the π-linker, i.e., the centrosymmetry of the whole compound because β vanishes in centrosymmetric compounds. For the triBOXs, the second opening gives rise to a Λ-shape compound, with a negligible change of β, but a decrease of the DR whereas, along the third opening, β remains similar and the DR decreases to the typical value of octupolar systems (DR = 1.5).     

基于铰链式六面顶压机的二级6-8模超高压大腔体内置加热元件的设计与温度标定

 首次报道了一种新型的基于铰链式六面顶压机的二级6-8模大腔体静高压装置的内置加热元件的设计与温度标定。此加热组装结构简单,升温快,保温效果好,并有效地解决了国外基于两面顶压机构架下的二级6-8模内加热组装中热电偶在施加压力时易断的问题。以低成本的碳管为加热元件,采用直接和间接两种加热方式,用双铂铑（Pt6%Rh-Pt30%Rt）B型热电偶进行温度测量,并根据实验过程中加热功率与腔内实际温度的关系,对不同压力下腔体内的温度进行了标定。实验结果表明：此加热系统的油压达到40 MPa（腔体压力约10 GPa）时,温度可以达到1 700 ℃以上;在油压为30 MPa、样品室温度为1 000 ℃时,保温时间可达2 h,甚至更长;实验中获得样品的直径可达3 mm,高度可达7 mm,实现了在高温超高压条件下大样品的制备,满足了实验对产生高温超高压条件的需要。