吡哌酸的固体表面-延迟荧光法研究

研究了吡哌酸(PPA)的同体表面-延迟荧光特征,实验表明Be(Ⅱ)、Mg(Ⅱ)、Ca(Ⅱ)、Sr(Ⅱ)、Ba(Ⅱ)及Zn(Ⅱ)、Cd(Ⅱ)、La(Ⅲ)等无机盐能显著增强PPA的固体表面-延迟荧光(SS-DF).pH值对PPA的SS-DF有显著影响。寿命测量结果表明,在固体表面PPA是以双指数衰减的,同时测量了PPA的低温光谱,在本文选择的条件下,PPA分析曲线的线性范围为1.8～1800ng/斑点。     

Miscible blends through hydrogen bonding: effects on polymer properties

Miscible blends through hydrogen bonding have been intensively studied. The effects of a variety of miscible hydrogen bonded polymer blends on properties such as thermal and thermal oxidative stability, moisture sensitivity, modulus and glass transition temperature are discussed. In addition, the preparation of semi-interpenetrating polymer networks (IPNs) and studies of the effect of crosslinking on the miscibility in hydrogen bonded polymer blends are reviewed.     

Effect of carbonate incorporation on the structural and superconducting properties of the double chain compound Y2Ba4Cu7O15−x

Structural investigations on powder samples of Y₂Ba₄Cu₇O_15–x with different carbonate content have been performed. Powder x-ray Rietveld refinements showed the remarkable influence of carbonate incorporation on the lattice parameters. Most important is the decrease of T_c with increasing carbonate content. We assign these effects to an incorporation of the carbonate ion into the crystal lattice, copper vacancies at the Cu(1) position and a possible misorientation of the copper oxygen single chains. No change of the structure (e. g. superstructure) could be found.     

由气相色谱程序升温数据计算恒温保留指数

提出了一种由程序升温数据推算恒温保留指数的计算方法,采用实验数据关联死时间和温度的关系,引入等效温度作为间接变量进行最优化。应用于Ｃ＿５～Ｃ＿９正构烷烃和Ｃ＿６烯烃的数据表明该法适应性强、精确度高,推算的恒温保留指数可作为定性依据。     

Percolation behaviour of ultrahigh molecular weight polyethylene/multi-walled carbon nanotubes composites

The electrical conductivity of polymer/multi-walled carbon nanotubes (MWCNTs) composites in a powder and in a hot-pressed compacted state, prepared by mechanical mixing, was studied. The semicrystalline ultrahigh molecular weight polyethylene (UHMWPE) was used as a polymer matrix. The data clearly evidence the presence of a percolation threshold φ_c at a very small volume fraction of the MWCNTs φ in a polymer matrix, φ_c ≈ 0.0004-0.0007. The ultralow percolation threshold in UHMWPE/MWCNTs thermoplastic composites was explained by high aspect ratio of the nanotubes and their segregated distribution inside the polymer matrix. The method of composite preparation effects the values of percolation threshold concentration φ_c and critical exponent t. A noticeable positive temperature coefficient of resistivity (PTC effect) was observed in the region of temperatures higher than melting point. It was explained by influence of thermal expansion of the polymer matrix and independence from the melting process that is a result of specific structure of conductive phase.     

EFFECTS OF COUPLING AGENTS ON THE CRYSTALLIZATION BEHAVIOR OF PP/T-ZnOw COMPOSITES

The objectives of this paper are to understand the crystallization behavior of polypropylene(PP)composites with surface modified tetra-needle-shaped zinc oxide whisker(T-ZnOw).T-ZnOw was surface modified with different coupling agents,such as silane coupling agents(KH-550,KH-560)and titanate coupling agent(NDZ-105),in order to improve the compatibility between PP and T-ZnOw.DSC and POM were used to characterize the melt and crystallization behavior and the crystalline structures of the composites,respectively.The results show that the surface modified T-ZnOw acts as a nucleating agent of PP crystallization,depending on the coupling agent used for modification.KH-550 and KH-560 have more apparent role in improving the interfacial interaction than NDZ-105 and induce PP crystallization at higher temperature and with smaller spherulites size.The results also suggest that the crystallization behavior depends on not only the content of coupling agent,but also the content of the surface modified T-ZnOw used in the composites.     

Oxidative Stabilization of Poly(norbornene) Polymers Prepared by Ring Opening Metathesis Polymerization

Polymers prepared by ring opening methathesis polymerization contain double bonds along the backbone and are susceptible to oxidation during high temperature processing or device operation. To overcome this, we report a simple method to improve the oxidative stability of ROMP based polymers by inclusion of a small percentage of monomer functionalized with a radical scavenger in the feedstock. The oxidation induction temperature was improved from 111°C up to 262°C when 8 mol% of the functionalized comonomer was included in the feedstock. Modest improvements in the thermal decomposition temperature were also observed.     

Synthesis of Carbonyl Compounds from Alcohols Using Electrochemically Generated Superoxide Ions in RTILs

Abstract

We show that the superoxide ion (O₂ ^??) generated electrochemically from oxygen dissolved in room-temperature ionic liquids (RTILs) reacts with primary and secondary alcohols to form the corresponding ketones and carboxylic acids, respectively. Specifically, we study the conversion of benzhydrol to benzophenone and benzyl alcohol to benzaldehyde/benzoic acid. The kinetics (e.g., rate, selectivity, and yield) for these reactions are also determined as functions of the variations in the structure of the ionic liquids. The RTILs used here are imidazolium-based cations where the functional groups on the imidazolium ring are modified. Specifically, 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF₆], 1-butyl-2,3-dimethylimidazolium hexafluorophosphate [bdmim][PF₆], and 1-hexyl-3-methylimidazolium hexafluorophosphate [hmim][PF₆] are used as the reaction medium. These results are compared to an ammonium-based RTIL (N-butyl-N-trimethylammonium bis(trifluoromethylsulfonyl)imide). The results show that the nucleophilic attack by the O₂ ^?? of both the RTIL and the alcohol, especially that of the H atom at the R2 position of the [bmim][PF₆] and [hmim][PF₆], greatly affects the yields. No RTIL degradation products were detected for the reactions in [bdmim][PF₆] and N-butyl-N-trimethylammonium bis(trifluoromethylsulfonyl)imide ionic liquids. For the benzyl alcohol oxidation reaction in the RTIL, N-butyl-N-trimethylammonium bis(trifluoromethylsulfonyl)imide, benzaldehyde formed did not undergo further oxidation to form benzoic acid, which may be due to the greater hydrophobicity of this RTIL. The competitive reaction kinetics between the alcohol and RTIL component must be considered in the selection of the RTIL solvent system.     

含铜MFI分子筛的H2-TPT和O2-TPD研究

 采用H2－TPR和O2－TPD手段考察了不同金属离子交换的ZSM－5分子筛催化剂上的氢还原性能和氧脱附性能．发现Cu－ZSM－5催化剂的储氧能力及氧脱附性能优于Co－ZSM－5和Fe－ZSM－5催化剂;储氧能力强、低温下氧脱附性能好的催化剂,对NO分解反应的催化活性就高．铜离子是反应的活性中心．添加Ag和Ce可使Cu－ZSM－5催化剂上氧的脱附温度大大降低．Cu－ZSM－5／堇青石整体式催化剂上Cu的存在形式与单纯的Cu－ZSM－5有差异,整体式催化剂上的一价铜数量少,但较稳定．     

Preparation of Poly(N‐isopropylacrylamide) Microgels using Different Initiators Under Various pH Values

Ammonium persulfate (APS), 2,2′‐azobis(amidinopropane) dihydrochloride (V50) and 4,4′‐azobis(4‐cyanovaleric acid) (ACVA) were utilized to prepare temperature‐sensitive poly(N‐isopropylacrylamide) (PNIPAM) microgels by precipitation polymerization under various reaction pH conditions. Their particle sizes and swelling ratios depended on the reaction pH due to the pH dependence on the ionization degree of the decomposed fragments originating from the initiators and their hydrophilicity‐hydrophobicity. The more hydrophobic initiator, under the reaction pH conditions used, could be partitioned to a greater extent into the microgel particles due to the hydrophobicity of PNIPAM chains at the reaction temperature, which led to a more cross‐linked structure inside the microgels resulting in their smaller swelling ratio. pH dependence of surface charge density of the microgels with amidino groups or carboxylic acid groups on their surfaces was evidenced by the variation of their zeta potentials as a function of pH.