Trouble finding the optimal AdS/QCD

In the bottom-up approach to AdS/QCD based on a five-dimensional gravity dilaton action the exponential of the dilaton field is usually identified as the strong or 't Hooft coupling. There is currently no model known which fits the measurements of the running coupling and lattice results for pressure at the same time. With a one parametric toy model we demonstrate the effect of fitting the pressure on the coupling and vice versa.     

PS_(3000)-b-PAA_(5000)球形胶束温度效应的原位小角X射线散射技术研究

应用小角X射线散射技术(SAXS)对两亲嵌段共聚物聚苯乙烯聚丙烯酸(PS-b-PAA)胶束形貌的温度影响进行了原位表征.SAXS结果表明:随着水含量的增加,粒子尺寸相应增加;对于水含量10%的PS_(3000)-b-PAA_(5000)胶束溶液,发现了明显的SAXS双峰现象;双峰的位置不随着温度的变化而改变,但是peak 1和peak 2的相对强度随着温度发生了减弱和增强的交错变化;相邻的SAXS双峰说明在PS_(3000)-b-PAA_(5000)胶束溶液中最初形成的粒子尺寸并不是均匀的,主要分为尺寸极其相近的两种球形粒子;随着温度的升高,粒径大小不同的两种粒子存在着一种消融和生长的过程,并且保持着一个相同的归一化动态平衡速率.     

基于LIBS及时间分辨特征峰的激光除漆机理研究

激光除漆是一种高效、清洁的新型清洗技术,对激光除漆物理过程和机理的研究是该技术发展的关键。基于LIBS技术,测量得到油漆去除过程中等离子体的发光光谱,计算出油漆样品去除前后等离子体的电子密度和温度,研究了油漆中特征元素对应的光谱特征峰强度随时间的变化情况。结果表明,随着激光作用脉冲数量的增加,油漆去除深度逐渐增加,等离子体电子密度和温度在将漆去除干净的最后几个脉冲作用时呈下降趋势。油漆中Ti元素的所对应的特征峰信号持续时间为2个μs,油漆去除前后信号强度呈现跳跃减少,该现象可用于快速、准确、实时的判断油漆去除情况。     

两种测试高温超导薄膜微波表面电阻方法的讨论

介绍两种工作在12GHz附近的高温超导薄膜微波表面电阻Rs测试系统,并分析各自的特点.同时简介电子科技大学在提高Rs测试精度上所作的一些改进.     

Experiments and analysis of thin tungsten slice and W/Cu brazing for primary collimator scraper in CSNS/RCS

According to the requirements for the beam collimation system of the rapid cycling synchrotron(RCS)of China Spallation Neutron Source(CSNS),the main structure of a scraper of primary collimator is made by W/Cu brazing,in which the thickness of tungsten slice is 0.17 mm.In order to get the best mechanical properties,the brazing temperature is suggested to be controlled under the recrystallization temperature of tungsten,while the recrystallization temperature is affected directly by the thickness of tungsten.Because of little research and application on the brazing of thin tungsten slice of 0.17 mm and copper,tensile tests are done to get the mechanical properties of tungsten slices which experience different brazing temperatures.In keeping the inner relationships between the mechanical properties and temperature,another experiment is done by using SEM to scan the microstructures including the size and distribution of crystals.Finally we determine the recrystallization temperature of tungsten slice of 0.17 mm,and get the best parameters of W/Cu brazing for scrapers of primary collimator in CSNS/RCS.     

微型同轴脉管制冷机最低制冷温度影响因素的实验研究

本文对微型同轴脉管制冷机最低制冷温度的影响因素进行了实验研究。试验结果表明:在其他运行参数不变的情况下,随着氢浓度的逐渐减少,最低制冷温度也逐渐降低,当氢的摩尔浓度小于20％时,其最低制冷温度和纯氦相差不大。不同的氢氦配比下,该脉管制冷机的最佳运转频率为16.7 Hz。随着系统平均压力的提高,最低制冷温度也随之下降,但变化幅度越来越小。     

Variable temperature system using vortex tube cooling and fiber optic temperature measurement for low temperature magic angle spinning NMR

We describe the construction and operation of a variable temperature (VT) system for a high field fast magic angle spinning (MAS) probe. The probe is used in NMR investigations of biological macromolecules, where stable setting and continuous measurement of the temperature over periods of several days are required in order to prevent sample overheating and degradation. The VT system described is used at and below room temperature. A vortex tube is used to provide cooling in the temperature range of -20 to 20 degrees C, while a liquid nitrogen-cooled heat exchanger is used below -20 degrees C. Using this arrangement, the lowest temperature that is practically achievable is -140 degrees C. Measurement of the air temperature near the spinning rotor is accomplished using a fiber optic thermometer that utilizes the temperature dependence of the absorption edge of GaAs. The absorption edge of GaAs also has a magnetic field dependence that we have measured and corrected for. This dependence was calibrated at several field strengths using the well-known temperature dependence of the (1)H chemical shift difference of the protons in methanol.     

(Zn、Cd)S:Cu、Br黄色交流电致发光材料的晶体结构和发光特性

本文首次提出一种制备黄色交流粉末电致发光材料的新方法.在以ZnS为基质的绿色材料的基础上,低温扩散CdS,获得系列黄材料.并测量了晶体结构和发光特性.     

多波段微量TNT成像探测的数值分析和实验研究

建立了CO2激光器辐照微量爆炸物温升分布三维模型,对激光辐照过程和冷却过程中8~14μm和3~5μm波段内的目标表面辐射温度变化特性分别进行分析.利用设计的探测系统对目标进行初步探测,用8~14μm和3~5μm热像设备对目标进行观察分析.研究表明:在10.6μm激光照射过程中,8~14μm波段内沾有TNT目标的辐射温度分别由TNT、基底在8~14μm波段的发射率和对激光辐照的反射率共同决定;在3~5μm内目标辐射温度主要由TNT、基底在3~5μm波段的自身发射率决定.在探测过程中,8~14μm波段内沾染TNT区域的辐射温度明显高于周围区域,而在3~5μm波段内,目标表面辐射温度整体下降,并且沾染区域的辐射温度变得低于周围.