Nonstationarity and related measures for time‐dependent hartree–fock and multiconfigurational models

Based on an earlier article (Eberly and Singh, Phys. Rev. D 1973 , 7, 359) and related works on short‐time evolution, this article proposes a many‐electron formulation for the nonstationarity degree which can be assigned to quantum system at each time point. The key measure introduced, , is a nonstationarity index that can be thought of as an inverse nominal lifetime at each instance of time. The index is directly computed from the time derivative of one‐electron density matrix and is a size‐consistent quantity. In this article, the approach is developed for the time‐dependent Hartree–Fock (TDHF), single‐excitation (TDCIS), and time‐dependent full configuration interaction (TDFCI) models. As a rule, nonstationarity effects are more pronounced in correlated electron systems, and a joint analysis of and the multiconfigurational character of wave functions apparently provide a deeper insight into dynamical molecular processes. The performed calculations on small molecules in laser fields show a preference for the TDCIS model when comparing TDCIS and TDHF with the “exact” TDFCI model. © 2013 Wiley Periodicals, Inc.     

SO4 2−/SnO2: Efficient,Chemoselective, and Reusable Catalyst for Acylation of Alcohols,Phenols, and Amines at Room Temperature

Abstract

SO₄ ^2?/SnO₂ was employed for the acylation of a variety of alcohols, phenols, and amines under solvent‐free conditions at room temperature. This method showed preferential selectivity for acetylation of the amino group in the presence of a hydroxyl group. The reported method is simple, mild, and environmentally viable, using several other acid anhydrides at room temperature.     

A correlation between the variable melt flow index and the molecular mass distribution of virgin and recycled polypropylene used in the manufacturing of battery cases

This study looked at establishing a correlation between the variable melt flow index (VMFI) values of molten polypropylene (PP) with different piston-load masses using a standard MFI analyser. The study was done using virgin PP and recycled PP obtained from recycling Pb-acid batteries. The study showed that the results would fit a suitable power function equation where the size of the exponent reflects the increase in flow characteristics of the polymer with increased piston-load mass. The established correlation was then compared to the average molecular weight distribution of virgin PP determined by gel permeation chromatography (GPC). Good agreement was obtained for the range of grades of virgin PP samples that correlated well with the Mark-Houwink power law where the inverse of the MFI (1/MFI) would be proportional to the average molecular weight to the power of 3.4 (Mw^3.4). GPC analysis cannot be effectively used to study recycled PP, where a number of factors can influence the melt flow properties such as fillers, impurities and the presence of polyethylene in the polymer matrix. Instead, a comparative understanding of the flow behaviour of recycled PP to that of virgin PP was done by using the VMFI method to possibly show the dissimilar polymer melt flow behaviour of using virgin and recycled PP material in injection moulding of new battery cases and lids, or when attempting to seal the lid to the battery case during manufacturing.     

Preparation and Characterization of Styrene/Butyl Acrylate Emulsifier-Free Latex with 2-Acrylamido-2-Methyl Propane Sulfonic Acid as a Reactive Emulsifier

A kind of emulsifier-free latex (FL) was successfully synthesized from styrene (St) and butyl acrylate (BA) with 2-acrylamido-2-methyl propane sulfonic acid (AMPS) as a reactive emulsifier. The particle size of latex particles, stability against electrolytes, minimum film forming temperature (MFT) and water contact angle (CA) were evaluated and compared with a conventional latex (CL). Test results show that FL has larger particle size, better stability against electrolytes and lower MFT value compared with CL; higher AMPS content leads to smaller particle size and smaller water CA.     

Effect of Emulsification Method on the Properties of Lecithin‐ and PGPR‐Stabilized Water‐in‐Oil‐Emulsions

Water‐in‐oil (w/o) emulsions were prepared with phosphatidylcholine‐depleted lecithin or polyglycerol polyricinoleate (PGPR) as emulsifying agents. The effect of different laboratory emulsification devices and the effect of sodium chloride on particle size distribution, coalescence stability, and water droplet sedimentation were investigated. The properties of lecithin‐stabilized w/o emulsions were found to depend more strongly on the emulsifying method than those prepared with PGPR. The rotor‐stator system was not suitable for preparing stable w/o emulsions with lecithin. Whereas the addition of salt was essential to achieve coalescence‐stable emulsions prepared with PGPR, the presence of NaCl favored the coalescence of water droplets and phase separation in emulsions containing lecithin.     

Nuclear quantum effect and temperature dependency on the hydrogen‐bonded structure of base pairs

The structure of Watson–Crick‐type adenine‐thymine and guanine‐cytosine pairs has been studied by hybrid Monte Carlo (HMC) and path integral hybrid Monte Carlo (PIHMC) simulations with the use of semiempirical PM6‐DH+ method in the gas phase. We elucidated the nuclear quantum effect and temperature dependency on the hydrogen‐bonded moiety of base pairs. It was shown that the contribution of nuclear quantum effect on the hydrogen‐bonded structure is significant not only at low temperature 150 K but also at temperature as high as 450 K. The relative position of hydrogen‐bonded proton between two heavy atoms and the nuclear quantum nature of the proton are also shown. Furthermore, we have applied principal component analysis to HMC and PIHMC simulations to analyze the nuclear quantum effect on intermolecular motions. We found that the ratio of Buckle mode (lowest vibrational mode from normal mode analysis) decreases due to the nuclear quantum effect, whereas that of Propeller mode (second lowest vibrational mode) increases. In addition, nonplanar structures of base pairs were found to become stable due to the nuclear quantum effect from two‐dimensional free energy landscape along Buckle and Propeller modes. © 2013 Wiley Periodicals, Inc.     

Transport Studies with Composite Membrane by Sol-Gel Method

The preparation of polystyrene-based composite membrane at different pressures with varying amounts of material has been described. In order to understand the mechanism of transport of ions, membrane potential measurements were carried out using different concentrations of 1:1 electrolyte (KCl, NaCl, and LiCl) solutions and also to evaluate various membrane parameters such as mobility, distribution coefficient, and charge effectiveness controlling the transport phenomena. The membrane potential offered by the electrolytes is in the order of LiCl > NaCl > KCl, and the membrane is found to be cation selective. The large deviation in the value of K _± at the lower concentration of electrolytes was attributed to the high mobility of comparatively free charges of the strong electrolyte. Teorell, Meyer, and Sievers (TMS) method was used for the estimation of the thermodynamically fixed charge density of membranes. The data were then utilized to calculate membrane potential using the TMS theory. It was interesting to note that the theoretical predictions were borne out quite satisfactorily with experimental results.     

MICELLE FORMATION BY ANIONIC AND CATIONIC SURFACTANTS IN AQUEOUS 18-CROWN-6 ETHER,P-CYCLODEXTRIN,AND 1,10-PHENANTHROLINE SOLUTIONS AT DIFFERENT TEMPERATURES

The conductances of sodium perfluorooctanoate (SPFO), sodium dodecylsulphate (SDS), dodecyltrimethylammonium bromide (DTAB), and tetradecyltrimethylammonium bromide (TTAB) in 18-crown-6 ether + water (CR+W), p-cyclodextrin + water (CY+W), and 1,10-phenanthroIine + water (Phen+W) mixtures with fixed 4 mM of each additive were determined over the temperature range of 5-55 °C. The conductivity plots for all the surfactants showed single break from which the critical micellization concentration (cmc) and degree of micelle ionization (x) were computed. From the pre and the post micellar slopes of the conductivity curves, the equivalent conductivities of the monomeric (Aass) and the micellar states (Amjc), respectively, were calculated and discussed with respect to the surfactant-additive complexation. It was observed that the micelle formation of all the ionic surfactants irrespective of the nature of their head groups were delayed in CYC+W in comparison to that in CR+W and Phen+W systems over the temperature range studied. The micelle formation of SPFO and SDS in CR+W and Phen+W systems showed stabilization of the respective micelles due to the adsorption of Na⁺-CR and Na+-Phen complexes at the micelle solution interface in comparison to that of DTAB and TTAB.     

Characterization of Colloidal Gas Aphron-Fluids Produced from a New Plant-Based Surfactant

Colloidal gas aphrons (CGAs) are gas bubbles with diameters ranging from 10 to 100 microns, generated by intense stirring of a surfactant solution at high speed. The surface activity and aggregation behavior of the surfactant affects the size/size distribution, stability, and other physicochemical properties of generated aphrons. Therefore, selection of a suitable surfactant is important for the generation of microbubbles with the desired properties. The goal of this articleis to investigate the potential use of a new plant-derived surfactant as an aphronizer surfactant in preparation of CGA-based drilling fluids for accomplishing desirable rheological and filtration properties. For this purpose, natural surfactant obtained from leaves of special tree, namely, Zizyphusspina Christi and used for preparation of aphron-based fluids. To achieve the research objectives, laboratory tests of suspension generation, microscopic visualization, initial yield, filtration loss, and rheological characterization with varying concentrations of surfactant and polymer were performed. Experimental results demonstrate that newly proposed biosurfactant has a great potential for application in preparation of CGA-based drilling fluids for implementation in petroleum drilling industry.      

Physical and Rheological Characteristics of Emulsion Model Structures Containing Iranian Tragacanth Gum and Oleic Acid

The physical and rheological properties of oil in water model emulsion systems containing Iranian tragacanth gum (TG) (0.5, 1 g/100 ml emulsions), whey protein isolate (WPI) (2, 4 g/100 ml emulsions), and oleic acid (5, 10 ml/100 ml emulsions) were investigated for droplet-size distribution, creaming index, and rheological properties of emulsions. The shear-thinning behavior of all dispersions was modeled using power law, Cross, and Ellis models. The power law model described the flow behavior of dispersions for its lowest standard error (0.29) and highest determination coefficient (R²) (0.99). Rheological investigation showed that both loss (G″) and storage (G′) modules increased as gum and oil content increased. Delta degree was 0.1 and increased as frequency increased, indicating that liquid-like viscose behavior dominated solid-like elastic behavior. Droplet-size distribution was measured by light scattering and microscopic observations revealed a flocculated system. Gum, WPI, and oil contents decreased the emulsion creaming index with gum concentration having the greatest effect.