Influence of Generalized (r, q) Distribution Function on Electrostatic Waves

Non-Maxwellian particle distribution functions possessing high energy tail and shoulder in the profile of distribution function considerably change the damping characteristics of the waves. In the present paper Landau damping of electron plasma (Langmuir) waves and ion-acoustic waves in a hot, isotropic, unmagnetized plasma is studied with the generalized (r,q) distribution function. The results show that for the Langmuir oscillations Landau damping becomes severe as the spectral index r or q reduces. However, for the ion-acoustic waves Landau damping is more sensitive to the ion temperature than the spectral indices.     

PS_(3000)-b-PAA_(5000)球形胶束温度效应的原位小角X射线散射技术研究

应用小角X射线散射技术(SAXS)对两亲嵌段共聚物聚苯乙烯聚丙烯酸(PS-b-PAA)胶束形貌的温度影响进行了原位表征.SAXS结果表明:随着水含量的增加,粒子尺寸相应增加;对于水含量10%的PS_(3000)-b-PAA_(5000)胶束溶液,发现了明显的SAXS双峰现象;双峰的位置不随着温度的变化而改变,但是peak 1和peak 2的相对强度随着温度发生了减弱和增强的交错变化;相邻的SAXS双峰说明在PS_(3000)-b-PAA_(5000)胶束溶液中最初形成的粒子尺寸并不是均匀的,主要分为尺寸极其相近的两种球形粒子;随着温度的升高,粒径大小不同的两种粒子存在着一种消融和生长的过程,并且保持着一个相同的归一化动态平衡速率.     

基于LIBS及时间分辨特征峰的激光除漆机理研究

激光除漆是一种高效、清洁的新型清洗技术,对激光除漆物理过程和机理的研究是该技术发展的关键。基于LIBS技术,测量得到油漆去除过程中等离子体的发光光谱,计算出油漆样品去除前后等离子体的电子密度和温度,研究了油漆中特征元素对应的光谱特征峰强度随时间的变化情况。结果表明,随着激光作用脉冲数量的增加,油漆去除深度逐渐增加,等离子体电子密度和温度在将漆去除干净的最后几个脉冲作用时呈下降趋势。油漆中Ti元素的所对应的特征峰信号持续时间为2个μs,油漆去除前后信号强度呈现跳跃减少,该现象可用于快速、准确、实时的判断油漆去除情况。     

两种测试高温超导薄膜微波表面电阻方法的讨论

介绍两种工作在12GHz附近的高温超导薄膜微波表面电阻Rs测试系统,并分析各自的特点.同时简介电子科技大学在提高Rs测试精度上所作的一些改进.     

水平梯度表面能材料表面上的滴状凝结换热系数

本文在均质表面的单个球缺形液滴换热模型和液滴通用尺度分布规律的基础上,结合梯度表面能材料表面的液滴分布和凝结换热特性,得到了一维水平梯度表面能材料表面上的滴状凝结换热计算式。在此基础上,研究了壁面过冷度、接触角梯度、工质物性等参数对梯度表面能材料表面滴状凝结换热性能的影响。结果表明:随着过冷度的增加和凝结工质汽化潜热的增大和表面张力的减小和接触角梯度的增大,平均表面凝结换热系数会增大。     

高温超导电缆终端预制式应力锥的设计与分析

高温超导电缆终端是高温超导电缆系统的重要组成部分。借鉴常规电缆终端预制式应力锥的设计理论,结合高温超导带材的特殊工作特性,选用耐低温的绝缘材料,对高温超导电缆终端预制式应力锥进行设计。运用有限元分析软件ANSYS对设计的高温超导电缆终端预制式应力锥进行建模和仿真计算,得到终端处的电场和电位分布,并将仿真结果和理论计算结果进行对比分析,验证设计的可行性,为进一步的研究奠定了基础。     

A simple model to extract hyperfine interaction distributions from Mössbauer spectra

The general problem of finding a distribution in hyperfine interaction parameters from experimental Mössbauer spectra is outlined. Existing methods may lack flexibility to be easily applicable to simple problems. A line shape for hyperfine parameter distributions is given, which is based on linear segments in the probability function. This method is applied in the analysis of samples containing iron in a silicate glass.     

Experiments and analysis of thin tungsten slice and W/Cu brazing for primary collimator scraper in CSNS/RCS

According to the requirements for the beam collimation system of the rapid cycling synchrotron(RCS)of China Spallation Neutron Source(CSNS),the main structure of a scraper of primary collimator is made by W/Cu brazing,in which the thickness of tungsten slice is 0.17 mm.In order to get the best mechanical properties,the brazing temperature is suggested to be controlled under the recrystallization temperature of tungsten,while the recrystallization temperature is affected directly by the thickness of tungsten.Because of little research and application on the brazing of thin tungsten slice of 0.17 mm and copper,tensile tests are done to get the mechanical properties of tungsten slices which experience different brazing temperatures.In keeping the inner relationships between the mechanical properties and temperature,another experiment is done by using SEM to scan the microstructures including the size and distribution of crystals.Finally we determine the recrystallization temperature of tungsten slice of 0.17 mm,and get the best parameters of W/Cu brazing for scrapers of primary collimator in CSNS/RCS.     

微型同轴脉管制冷机最低制冷温度影响因素的实验研究

本文对微型同轴脉管制冷机最低制冷温度的影响因素进行了实验研究。试验结果表明:在其他运行参数不变的情况下,随着氢浓度的逐渐减少,最低制冷温度也逐渐降低,当氢的摩尔浓度小于20％时,其最低制冷温度和纯氦相差不大。不同的氢氦配比下,该脉管制冷机的最佳运转频率为16.7 Hz。随着系统平均压力的提高,最低制冷温度也随之下降,但变化幅度越来越小。     

Variable temperature system using vortex tube cooling and fiber optic temperature measurement for low temperature magic angle spinning NMR

We describe the construction and operation of a variable temperature (VT) system for a high field fast magic angle spinning (MAS) probe. The probe is used in NMR investigations of biological macromolecules, where stable setting and continuous measurement of the temperature over periods of several days are required in order to prevent sample overheating and degradation. The VT system described is used at and below room temperature. A vortex tube is used to provide cooling in the temperature range of -20 to 20 degrees C, while a liquid nitrogen-cooled heat exchanger is used below -20 degrees C. Using this arrangement, the lowest temperature that is practically achievable is -140 degrees C. Measurement of the air temperature near the spinning rotor is accomplished using a fiber optic thermometer that utilizes the temperature dependence of the absorption edge of GaAs. The absorption edge of GaAs also has a magnetic field dependence that we have measured and corrected for. This dependence was calibrated at several field strengths using the well-known temperature dependence of the (1)H chemical shift difference of the protons in methanol.