Pt/ZnO 在室温水相无碱条件下绿色催化苯甲醇选择性氧化

醇类化合物选择性氧化是有机合成中一个非常重要的反应, 在精细化工领域具有重要应用. 而以水为绿色溶剂, 分子氧为绿色氧化剂实现醇类化合物选择性氧化是绿色化学领域的一大挑战. Pt 催化剂由于其优异的活化氧气和 C-H 键的能力在该反应中得到了广泛应用. 但是, 常规的 Pt 催化剂通常需要在较高温度和较高氧气压力以及加碱的条件下才能发挥作用, 从而引起了催化剂腐蚀等一系列问题. 从绿色化学角度出发, 进一步优化 Pt 催化剂, 让其能够在室温无碱条件下以空气为氧化剂选择性氧化醇类合成羰基化合物具有重要的研究价值和应用前景.本文通过化学还原法制备了 Pt/ZnO 催化剂, 系统研究了该催化剂在水相无碱条件下选择性氧化苯甲醇生成苯甲醛反应中的催化性能. X 射线电子衍射和透射电镜等结果表明, Pt 颗粒较小(3.2 ± 0.3 nm), 均匀分散在 ZnO 载体上; X 射线光电子能谱表明 ZnO 载体能够稳定 Pt 纳米颗粒表面的 Pt0物种. 上述催化剂在水相苯甲醇选择性氧化反应中, 在室温下即可催化空气高选择性氧化苯甲醇到苯甲醛 (选择性>99%), 并表现出比 Pt/SiO2, Pt/Al2O3, Pt/TiO2, Pt/Ca(Mg)-ZSM-5 等催化剂更为优异的催化活性. 这可归结于 Pt 和 ZnO 之间的协同作用. 该协同作用通过动力学实验和密度泛函理论计算 (DFT)得到了证实. 氧分压实验表明, 在以空气为氧化剂时, O2的活化并不是限制 Pt/ZnO 催化活性的关键因素, 而动力学同位素效应实验则证实了苯甲醇的 C-H 键活化是整个反应的决速步骤. 通过构建不同的理论模型, 分别计算了 Pt/ZnO 界面处以及纯 Pt 位点上苯甲醇选择性氧化的反应过程. 结果表明, 苯甲醇和氧气分子倾向于分别在 ZnO 和 Pt 上进行吸附, 随后由吸附的氧气分子来活化苯甲醇中的 C-H 键, 进而生成苯甲醛和水. 而当 ZnO 不参与苯甲醇的吸附活化时, 整个反应的活化能会大大提高, 表明 ZnO 和 Pt 之间的协同作用对于整个反应至关重要. 此外, Pt/ZnO 表现出非常优异的稳定性, 循环使用 4 次后, 催化剂结构以及催化活性没有显著变化.进一步向 Pt/ZnO 催化剂中引入少量 Bi 元素对 Pt 的电子结构进行修饰, 可以将 Pt/ZnO 的催化活性提高 3 倍. 所制备的 Pt/Bi-ZnO 复合物是目前报道的相同条件下催化苯甲醇选择性氧化反应转化频率 (45.1 h-1)最高的催化剂.     

蜂窝状Ho改性Fe-Mn/TiO2催化剂的制备及其低温选择催化还原(SCR)脱硝性能

采用模压法制备了蜂窝状Ho改性的Fe-Mn/TiO₂催化剂,研究了结构助剂、黏合剂和造孔剂等对成型催化剂低温选择催化还原（SCR）脱硝性能的影响。优选出一套理想的成型参数：水粉质量比为40%且逐次分批加入;结构助剂玻璃纤维的用量为10%（质量分数）;黏合剂羧甲基纤维素的用量为5%（质量分数）;助挤剂甘油的添加量为10%（质量分数）且分批加入;造孔剂活性炭粉的用量为2%（质量分数）。该蜂窝状催化剂在120 ℃下脱硝率维持在90%以上,并且在SO₂体积分数低于0.02%时具有一定的抗硫抗水性。表征结果表明,成型后蜂窝状催化剂比表面积降低,颗粒分散程度明显减弱,并且表面酸量和表面Mn⁴⁺含量下降,对催化活性有一定的影响。     

片状煤焦颗粒CO2气化过程中形态及结构演变特性研究

采用高温热台显微镜观测了片状煤焦颗粒CO₂气化过程中的形态演变,并通过拉曼光谱分析了气化半焦的碳微晶结构,同时研究了气化温度（1000-1200℃）和煤焦初始当量直径（1.00-1.60 mm）对其CO₂气化过程中的形态及结构演变的影响规律。结果表明,与反应前期相比,反应后期的颗粒收缩（面积、体积、当量直径）更加剧烈。在所研究的气化温度范围内,随着气化温度的升高,煤焦颗粒的面积收缩率和体积收缩率逐渐减小。煤焦初始粒径显著影响颗粒收缩,1100℃气化温度下,颗粒的收缩趋势在初始粒径1.30 mm处出现转折。煤焦气化过程中碳消耗主导着表观密度的变化,在所研究的温度和粒径范围内,当碳转化率达到80%时,表观密度比线性减小到0.4以下。在相同气化温度下,随着碳转化率的增加,煤焦的石墨化程度先减小后增加,无定形碳含量先增加再减小。     

One-pot three-component tandem reaction: Synthesis of aryl/alkyl cyanamides libraries and their further conversion into tetrazole derivatives

We have developed methodology for the synthesis of aryl/alkyl cyanamides from amines in one-pot four steps reaction using cheap, readily available and air stable copper source as catalyst under mild reaction conditions. We have also studied the application of cyanamides. In this connection, we could construct aryl tetrazolamine from cyanamides using click reaction     

Facile,Quick, and Gram‐Scale Synthesis of Ultralong‐Lifetime Room‐Temperature‐Phosphorescent Carbon Dots by Microwave Irradiation

Long‐lifetime room‐temperature phosphorescence (RTP) materials are important for many applications, but they are highly challenging materials owing to the spin‐forbidden nature of triplet exciton transitions. Herein, a facile, quick and gram‐scale method for the preparation of ultralong RTP (URTP) carbon dots (CDs) was developed via microwave‐assisted heating of ethanolamine and phosphoric acid aqueous solution. The CDs exhibit the longest RTP lifetime, 1.46 s (more than 10 s to naked eye) for CDs‐based materials to date. The doping of N and P elements is critical for the URTP which is considered to be favored by a n→π* transition facilitating intersystem crossing (ISC) for effectively populating triplet excitons. In addition, possibilities of formation of hydrogen bonds in the interior of the CDs may also play a significant role in producing RTP. Potential applications of the URTP CDs in the fields of anti‐counterfeiting and information protection are proposed and demonstrated.     

Physicochemical and thermal effects of pendant groups,spatial linkages and bridging groups on the formation and processing of polyimides

Aromatic polyimides are known for their remarkable thermal and chemical properties which are greatly influenced by their precursors. In this study, we report synthesis and characterization of four different aromatic polyimides. The four different dianhydrides (ODPA, BTDA, BPDA, and PMDA) were reacted with a diamine (BisAPAF) via azeotropic imidization under same conditions. FTIR analysis confirmed the formation of aromatic polyimides and all but one polyimide (HPI-BPDA) were found to be completely soluble in common solvents. The obtained molecular weights were between 16,000 and 32,000?g/mol, glass transition temperatures were between 250?°C and 275?°C, degradation temperatures were above 550?°C, and the d-spacing values were around 5?Å. These properties are promising and can be beneficial for various applications such as thin films and membranes.     

Superior electro-optical performance in vertically aligned liquid crystal devices based on aluminum oxide films

We achieved vertically aligned (VA) liquid crystals (LCs) on aluminum oxide (Al₂O₃) films deposited via e-beam evaporation using a rubbing treatment. Uniform and vertical LC alignment was achieved and high thermal stability was obtained using these substrates. By analyzing measurements from optical retardations, we confirm that the LC orientation is adjustable using rubbing treatment. The superior electro-optical characteristics of the VA cells based on Al₂O₃ films are measured and compared with those based on polyimide layers, indicating that this approach will allow the fabrication of high-performance, advanced LC displays using a conventional rubbing process.     

添加剂对高碱煤钠迁移和灰分烧结温度的影响

选取三种不同的添加剂（高岭土、SiO₂和Al₂O₃）,研究它们对高碱准东煤钠迁移和灰分烧结温度的影响,并且添加比例为1%-5%。结果表明,三种添加剂的钠捕集效率依次为：高岭土 > SiO₂ > Al₂O₃。钠捕集效率随着添加比例的增加而升高,但受温度影响比较复杂。高岭土的钠捕集效率在600-1000℃先增加后减小,并在900℃达到最大值,其余两种随温度的升高均减小。准东煤灰的烧结温度为803℃,添加高岭土后,烧结温度随添加比例的增加先降低后上升。当添加比例为3%时,因为钙长石和钙黄长石的低温共熔反应而达到最小值。SiO₂的添加比例为5%时,由于透辉石的生成和SiO₂本身的"骨架"作用,烧结温度迅速升高到879℃。Al₂O₃对烧结温度的影响最小。     

碱金属沉积对Mn-Ce/TiO_2低温SCR催化剂性能影响

采用溶胶凝胶法制备了Mn-Ce/TiO_2低温SCR催化剂,考察了碱金属浓度与种类对催化剂活性的影响,探究了不同反应条件下钠盐沉积对活性保留分率的影响,利用SEM、BET、XRD和FT-IR对催化剂碱金属中毒原因进行了分析。结果表明,碱金属毒化后催化剂脱硝活性下降,钾中毒催化剂失活程度高于钠中毒的催化剂,2%钾中毒催化剂在160℃时NO去除率为62.0%,较新鲜催化剂下降29.2%。这主要因为碱金属毒化造成催化剂比表面积明显减小,且催化剂载体锐钛矿型TiO_2部分转化为金红石型,BET和SEM表征均说明碱金属沉积堵塞了催化剂表面的微孔。碱金属对Mn-Ce/TiO_2催化剂活性保留分率的影响表明,催化剂的颗粒粒径对其活性保留分率影响不大,碱金属含量减小、温度升高,Mn-Ce/TiO_2催化剂的活性保留分率增加,Na_2SO_4和NaCl对Mn-Ce/TiO_2催化剂的脱硝活性抑制作用大于KNO_3。     

尖晶石LiMn_2O_4高温电化学容量衰减及改进

综述了高温下尖晶石ＬｉＭｎ２Ｏ４容量衰减的原因、机理研究和改进它的高温性能的方法以及目前的进展,且指出了可能的提高它的高温性能的途径。