Diffraction of partially coherent X‐rays in clessidra prism arrays

When small triangular prisms are arranged in arrays which have an overall appearance like an hourglass (in Italian: clessidra) they can focus X‐rays owing to a combined action of diffraction and refraction. From the optical point of view these objects can be regarded as a Fresnel variant of concave transmission lenses. Consequently they can provide larger apertures than purely refractive lenses. However, one has to recognize that clessidra lenses will strongly diffract as the lens structure is periodic in the direction perpendicular to the incident beam. In experiments the diffraction is reduced because it is difficult to illuminate the large apertures with a full spatially coherent wavefront. So the illumination is at best partially coherent. In order to interpret available experimental data for this condition, diffraction theory has been applied appropriately to the clessidra structure, taking into account the limited spatial coherence. The agreement between the theoretical simulations and experimental data is very good, keeping the lens properties at their projected values and allowing for only two free model parameters. The first is the lateral spatial coherence; the second is a lens defect, a rounding of all edges and tips in the structure. Both values obtained from the simulations have been found to be in agreement with expectations.     

Thermal Lens Spectroscopy for Quantitative Determination of a Cu(II) Complex With an 8-Aminoquinoline Derivative in Tap Water and Mining Wastewater Samples Using a Dual Beam Technique

Abstract

This article describes the quantitative determination of Cu(II) using thermal lens spectrometry. The chromogenic reaction involving Cu(II) and 5-(4-sulphophenylazo)-8-aminoquinoline in alkaline solution was studied in different experimental conditions such as pH, ligand concentration, methanol volume, and presence of interfering ions. A collinear dual beam set-up has been used for direct quantitation in water samples without a pre-concentration step. The optimized conditions provided a linear calibration in the concentration range from 3.0 to 15.0?×?10^?7?mol L^?1. The detection and quantitation limits were 6.13?×?10^?8? and 2.04?×?10^?7?mol L^?1, respectively. Resultantly, an application to Cu(II) determination in tap water (recovery 99.8–103.3%) and mining (synthetic) wastewater (95.3–98.0%) shows relative SDs ≤ 3.1%. The method is presented as a new alternative for the direct Cu(II) determination in real samples.     

800万像素手机广角镜头设计

为了满足市场对高像素手机广角镜头的需求,设计出一款800万像素大相对孔径的手机广角镜头。该手机镜头由4片塑料非球面透镜和1片红外滤光片组成,镜头的光圈值F为2.45,视场角为80°,采用Omnivision公司的OV8850型号800万像素CMOS图像传感器,最大分辨率为3 280 pixel×2 464 pixel,CMOS图像传感器的像素尺寸为1.1 μm,奈奎斯特频率为454 lp/mm。设计结果显示,镜头在1/2奈奎斯特频率处,0.7视场内的MTF值均大于0.48,全视场的MTF值大于0.38;在奈奎斯特频率处,0.7视场内的MTF值大于0.15;最大畸变小于2%,因此可获得优良的成像质量。     

基于六角形晶格的光子晶体零折射率特性及其光学应用研究

运用色散特性分析的方法,在六角形晶格光子晶体能带结构的布里渊区中心找到了狄拉克点,用等效媒质理论验证了在这一点上光子晶体的等效介电常量和等效磁导率同时为零,即存在狄拉克频点,用此六角形晶格光子晶体可以实现零折射率材料.随后运用有限元数值仿真方法,研究了此六角形晶格结构在狄拉克频点及其附近所呈现的零折射率特性.将此种六角形晶格光子晶体经过合理设计用以制作凹透镜,发现可以实现远场的亚波长聚焦.此外在凹透镜的入射面处引入防反射结构可以在一定程度上增强聚焦效果,提高了系统的分辨率.     

双层介电薄膜结构双液体变焦透镜的研究

在双层介电薄膜结构双液体变焦透镜模型的基础上,分析了透镜焦距与外加电压、双层介电薄膜的介电常量、薄膜厚度等参量的关系.并以降低双液体变焦透镜驱动电压为目的,选择了相对介电常量较高的五氧化二钽薄膜作为内层介电层,相对介电常量较低的防水层为外层介电层,分析了双层介电薄膜的厚度以及厚度的匹配对双液体变焦透镜的变焦范围和驱动电压的影响,在保证一定的变焦范围并尽可能降低透镜驱动电压情况下获得最佳透镜工艺参量.模拟结果表明:疏水层薄膜厚度比高介电层薄膜厚度小很多时,双液体变焦透镜可实现低压驱动,且双液体变焦透镜在一定变焦范围内所需驱动电压可下降到10V以下,而疏水层薄膜厚度与高介电层薄膜厚度相当或高于高介电层薄膜厚度都不能有效利用高介电薄膜的高介电性能来降低双液体变焦透镜的驱动电压.     

基于狭缝扫描的表面等离子体共振成像

利用表面等离子体共振技术进行电介质样品成像研究.采用高数值孔径显微物镜作为耦合元件,632.8nm He-Ne激光会聚激发金膜产生表面等离子体共振,通过狭缝光阑限制光束入射角,对金膜上的氮化硅光栅进行成像.反射光由放置在样品像方共轭面上的CCD摄像机接收,获得样品的表面等离子体共振像.通过扫描移动狭缝,得到入射角从44°至54°的扫描样品图像,从图像中提取样品各点的表面等离子体共振曲线,由计算机重构出样品的表面等离子体共振角谱灰度图.     

利用柱透镜调控涡旋光束的拓扑结构

提出了一种利用柱透镜调控涡旋光束拓扑结构的方法.利用计算全息法制作的叉形光栅掩模板,实验获得了具有不同拓扑荷的涡旋光束,分析了涡旋光束通过柱透镜变换后的强度和相位分布.结果表明,涡旋光束经柱透镜变换后,其拓扑荷符号将发生改变,并且高阶涡旋光束退化为多个分离的一阶涡旋光束.利用高阶激光模式的线性叠加特性以及古依相移对实验结果进行了理论解释,并通过数值模拟对实验结果进行了验证.