三羰基铬苯乙烯甲酰衍生物的质谱研究

近年来,随着对金属有机化合物的研究的不断深入,人们对它们的兴趣已由对结构、化学性质的探讨而扩展到对物理性质的研究,如磁性质、导电性、光学性质,并从中发现某些金属有机化合物,如某些芳基三羰基铬络合物及二     

n—InP在Fe^3＋／Fe^2＋溶液中光脉冲暂态行为（Ⅳ）

研究了波长、温度及表面处理对ｎ－ＩｎＰ光脉冲暂态行为的影响。结果表明，波长对时间常数无影响；随着温度升高，峰值下降，衰减变快。讨论了表面处理的影响，并对实验结果作了必要的解释。     

Preparation of Nanoparticulate [PMo11Cu(H2O)O39]5--n-C18H37NH2 Film Using Langmuir-BIodgett Method

Nanoparticulate [PMo₁₁Cu(H₂O)O₃₉]^5--(PCuMo₁₁)-n-C₁₈H₃₇NH₂ composite monolayer can be formed at the air-liquid interface using nanoparticulate PCuMo₁₁ as the subphase. The area extrapolated to π=0 is 0.27 nm² per hydrocarbon chain of the monolayer. The collapse pressure is about 3.5×10^-1 N. The composite monolayer was deposited on the solid substrate using the LB technique. The XPS characterization of the composite monolayer showed that in the film the directional alignment of PCuMo₁₁, molecules was in the direction of Cu atoms close to the amino groups of the octadecylamine moleculos.     

HPLC separation of hydrogenated derivatives of buckminsterfullerene

Summary The effect of composition and flow rate of the mobile phase on the HPLC separation of hydrogenated buckminsterfullerene (C₆₀H_n n=2–38) was investigated on BuckySep column. Toluene was used as the basic solvent and hexane, heptane, cyclohexane, THF, acetonitrile, acetone, ethanol and 2-propanol as co-solvents. The fraction of co-solvents was varied 10–80%, and the flow rate 1–0.1 mL min⁻¹. Toluene-acetonitrile 65∶35 and toluene-acetone 50∶50 provided the best separation. Under the best conditions complete separation of C₆₀H₂ and almost complete separation of the four most abundant isomers of C₆₀H₄ were achieved. Separation of derivatives with higher hydrogen content was very poor. Presented at: Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 3–5, 1997     

Preparation and Characterization of Ordered Ladder Like Polyphenylsilsesquioxane via Two-step Sol-gel Method

Soluble and ordered ladder like polyphenylsilsesquioxane was synthesized by a two-step sol-gel method including hydrolysis and polycondensation. The procedure was monitored by Fourier transform infrared spectroscopy and the presence of the ladder like structure was confirmed by X-ray techniques. 29Si NMR analysis shows a very narrow half peak width(δ<4) at δ -78.866 of the main chain unit C6H5SiO3/2 of polyphenylsilsesquioxane, indicating that the polyphenylsilsesquioxane has ordered ladder like structures ...     

碳酸酐酶模型化合物的合成、表征及其催化性能研究

模拟碳酸酐酶的活性中心结构,以三(取代吡唑基)硼氢根[T~p^R^,^R^1]^-为配体,合成了一系列金属配合物[T~p^R^,^R^1]MX[R=Ph,2'-thie(2'-噻吩基),Me;R^1=Ph,2'-thie,Me;M=Co,Ni,Cu,Zn,Cd;X=Cl,NO~3,CH~3COO]共13个,均经元素分析,IR,^1HNMR谱表征。选取其中5个有代表性的配合物,采用Stopped-flow技术,研究了模型物催化CO~2可逆水合反应的动力学,结果表明具备酶促反应动力学的一般特征。详细考察了溶液pH值、模型物的结构(尤其是中心金属离子的电子结构)、浓度对该反应的影响,得出一些重要的结果。计算出该反应有、无催化剂时的活化能,从本质上阐明了反应活化能降低是模型物加速反应的根本原因。     

Effects of applied anodic potential and pH on the repassivation kinetics of pure aluminium in aqueous alkaline solution

The repassivation kinetics of pure aluminium have been explored in aqueous alkaline solutions as functions of applied anodic potential and pH by using an abrading electrode technique and a rotating disc electrode. The repassivation rate of the abraded bare surface of pure aluminium increased with increasing applied anodic potential in aqueous alkaline solutions, while it decreased with increasing pH. These results revealed that the growth rate of the passivating oxide film is enhanced by an applied electric field, but it is lowered due to the chemical attack by hydroxyl ions. A potentiostatic anodic current decay transient obtained from the abraded electrode surface showed a constant repassivation rate in neutral and weakly alkaline solutions. In contrast, in concentrated alkaline solutions it was observed to consist of three stages: a high repassivation rate in the initial stage due to a high formation rate of the oxide film on the abraded bare surface; a zero value of the repassivation rate in the second stage due to the dissolution of the oxide film by the attack of OH⁻; a high repassivation rate in the third stage due to a lowered dissolution rate of the oxide film. The dissolution rate of the passivating oxide film was observed to depend on the removal rate of aluminate ions from the oxide/solution interface. Received: 1 April 1998 / Accepted: 3 July 1998     

应用于活性负离子聚合的高真空实验技术研究与改进

高真空实验技术在装置设计、加工制作以及操作实施方面需要实验人员具备熟练的玻璃烧接技术;细颈的制作及反应装置的退火处理是较为关键的操作;考虑到聚合反应装置的体积较大,对火封操作进行了设计改进,使其能够应用于位置固定的装置;对操作中频繁采用的易碎封口安瓿进行了设计改进,使实验操作更为便利;针对已封闭装置预留的细颈部位,设计...     

基于二氧化硅球腔微电极阵列的过氧化氢生物传感器制备

以聚苯乙烯(PS)微球阵列为模板,采用溶胶-凝胶法在氧化铟锡( ITO)电极上制备了二氧化硅(SiO2)球腔阵列,扫描电镜显示此方法制备的SiO2球腔阵列高度有序.电化学研究结果表明,该球腔阵列的循环伏安曲线符合微电极阵列的电化学特点.将血红蛋白(Hb)作为氧化还原模型蛋白直接吸附于球腔内,制得电流型过氧化氢(H2O2...     

The solvent venting injection technique in capillary supercritical fluid chromatography

A solvent venting technique for injection of volumes up to 1 μl on 50 μm i.d. SFC columns has been compared to direct injection methods. The peak broadening and peak splitting observed with direct injection have been examined and found to be related to the starting pressure, the column temperature, and the sample solvent, in addition to the sample volume. The solvent venting technique removed peak splitting and improved the column efficiency. With a proper selection of experimental conditions, the sample recovery was 100%. The major part of the solvent was eluted in 15–20 s. Several applications have been demonstrated.