高温超导变压器中带材临界电流随磁场变化的研究

通过自行设计的小型磁体产生稳态磁场,测量了高温超导带材在不同磁场下的临界电流,得到带材临界电流随外加磁场变化的曲线．并提出了高温超导变压器漏磁场优化设计的目标．     

AC losses in a flexible 10 m long conductor model for a HTS power transmission cable

To demonstrate the possibility of manufacturing a HTS power transmission cable with low AC losses, we fabricated a 10 m long cable conductor and a cryosystem. The conductor was wound in a four-layer design out of 2 km Ag/Bi-2223 tapes. We determined a critical current of 5000 A. Loss measurements were performed with an electric method which detects the voltage drop along the conductor with a lock-in technique and a calorimetric method which measures the temperature rise along the conductor. Both methods yield the same low loss values of only 0.8 W/m at 77 K and 2000 A_rms/50 Hz. This is due to the low loss winding scheme we used which assures an equal current distribution in all four layers through transformatoric coupling. We applied the uniform current distribution model and added the nonlinear V–I curve to describe quantitatively the obtained results.     

AC loss in a high-temperature superconducting coil

In a typical superconducting coil made of BSCCO/Ag tape, both amplitude and direction of the magnetic field determine the critical current, resistive voltage and AC loss. The distribution of the magnetic field along and across the superconducting tape in a coil is rather complex. This gives rise to the question: how accurate can one predict the critical current, V–I characteristic and AC loss of the AC coil from results of short sample measurements? To answer this question, we have measured and compared the characteristics of a short sample and a small coil employing 14 m of the same tape at 77 K. The comparison is performed as follows. First, a short sample is characterised with regard to the field dependence of the critical current, V–I characteristic and the AC loss. Second, the distribution of the magnetic field along the tape in a coil is accurately calculated. From the data, the voltage along the tape and the loss of the tape in the coil are found. Finally, the resistive voltage and the AC loss of the complete coil are calculated and compared to measured AC losses in the frequency range of 0 to 160 Hz, typical for power applications.     

Effect of the sheath resistivity and tape geometry on eddy current loss in Bi(2223) tapes

We have made a software electromagnetic simulation of eddy current effects in Bi(2223)Ag sheathed tapes with applied AC transport current in a broad frequency range. We have used simple models of monocore and multicore tapes. Calculated is the power distribution (W/m³) within the metal sheath using the geometry of real tapes. The numerical simulation is carried out with Finite-element-method software. The paper also describes the influence of the tape cross-sectional architecture and the sheath resistivity on the eddy current loss.     

涂层导体用金属基带表面对过渡层成核的机理研究

涂层导体用金属基带的表面状况对在其上制备的过渡层的形貌和取向有很大影响.在Ni单晶、轧制辅助双轴织构基带(RABiTS)Ni和经过硫化处理的Ni基带三种不同衬底上采用磁控溅射法制备了CeO₂过渡层.结果表明,在Ni单晶和硫化处理的Ni基带上制备的CeO₂薄膜取向较差,而在RABiTS Ni上制备的CeO₂薄膜完全呈c轴取向,表面平整致密.反射高能电子衍射图显示,RABiTS Ni具有的c(2×2)的S超结构对CeO₂薄膜的取向生长起到了很重要的作用. 关键词： 涂层导体 金属基带 超结构 过渡层     

拼接式编码器测角误差分析及试验

根据望远镜测角系统的精度需求,分析了影响拼接式编码器测角精度的误差源,以及多读数头测角消差原理,确定了采用相位相差90°的4读数头的测角方式。在某望远镜方位轴系转台进行了逆时针和顺时针方向的测角试验,通过对测角数据进行谐波分析并补偿后,得到两组实验测角误差RMS分别为0.34"、0.38"。实验表明,相位相差90°的均布4读数头的测角方式消除了由轴系误差、编码器安装位置误差和钢带安装盘部分圆度误差对测角精度的影响,实现了亚角秒级测角的目的。研究结果可用于大口径望远镜设计阶段的误差分析与分配、预估测角精度,为降低设计和加工误差提供参考。     

A Self-assembled T4（2）5（2） Water Tape Stabilized by a Nickel（II） Complex with L-cysteic Acid

An interesting T4(2)5(2) water tape formed by fused cyclic water pentamers and tetramer was self-assembled in a new inorganic host [Ni(L)(phen)2]·5H2O (L = L-cysteic acid) and characterized by X-ray diffraction. Each [Ni(L)(phen)2] molecule crystallizes with five water molecules with a molecular formula of [Ni(L)(phen)2]·5H2O. The T4(2)5(2) water tape and [Ni(L)(phen)2] molecules assemble into a network of water tapes sandwiched between [Ni(L)- (phen)2] tapes. The network is stabilized by π-π stacking between [Ni(L)(phen)2] molecules and three types of hydrogen-bonding interactions between [Ni(L)(phen)2] molecules, water molecules, and water and [Ni(L)(phen)2] molecules.     

Bi-2223/AgAu 带材及应用进展

Bi-2223/AgAu 高温超导带材因为较低的热导率和较高的载流性能, 被认为是制备高温超导电流引线的最佳材料之一. 这篇文章简单介绍了高温超导电流引线的工作特点和不同包套 Bi-2223 带材的热导率, 在此基础上详细介绍了目前 Bi-2223/AgAu 带材和高温超导电流引线国内外研究进展, 最后展望了 Bi-2223 带材的发展趋势.     

Ru-O/Ru hybrid type of underlayer for CoPtCr-SiO2 perpendicular recording media on flexible tape

Ru/CoPtCr-SiO₂ bilayer prepared at 4 and 26 mTorr of Ar gas pressure for the deposition of Ru and CoPtCr-SiO₂ layers, respectively, exhibits better magnetic properties suitable for perpendicular magnetic recording media when they are deposited at room temperature on a Pt seed layer prepared at 450 °C. The Ru-O seed layer fabricated by a reactive sputtering method improves the Ru (0 0 1) texture deposited on a Ru-O layer. The Ru-O/Ru hybrid type of underlayer causes the improvement of the c-axis orientation of CoPtCr crystallites in the CoPtCr-SiO₂ layer deposited on it. Fine granulation of magnetic grains in the CoPtCr-SiO₂ layer is also attained when they are deposited on the Aramid type of flexible tape substrates.