Electrophoretic field gradient focusing: an investigation of the experimental parameters

Electrophoretic field gradient focusing has been used to separate the two oxidation states of myoglobin (Mb), and to separate Mb from bromophenol blue (BPB). Polyacrylamide and Sephadex were shown to be suitable packing materials whilst silica led to band broadening with Mb. BPB and Mb could be simultaneously focused apart using either a fixed 21-electrode setup or a dynamic 6-electrode setup. Using a dynamic three-electrode setup either analyte could be focused but not both simultaneously. It was shown that a higher ionic strength buffer in the separation channel compared to the coolant channel enhanced focusing between electrodes due to a conductivity gradient. Different running buffers were investigated and it was found that using a pH 8.6 buffer containing N,N,N-tris(hydroxymethyl)aminomethane (Tris) and phosphate ions the oxidation states of Mb could be separated but the separation of Mb from BPB was not as good as would be hoped for. Using a pH 8.6 buffer containing Tris, N-2-hydroxyethylpiperazine-N'-3-propanesulphonate and chloride ions as running buffer, BPB and Mb could be well separated but the two oxidation states of Mb merged.     

Surface and interfacial properties of water-soluble wheat proteins

Surface and interfacial properties of water-soluble wheat proteins were investigated and compared with six reference proteins (bovine serum albumin, ovalbumin, β-lactoglobulin, trypsin, cytochrom C and β-amylase). Albumins extracted from wheat flour were separated by the free solution isoelectric focusing. The surface activity at the air/water, dodecane/water interfaces and dilatational rheological behaviour of the adsorbed layers was determined by pendant drop technique. Considerably high surface activity of wheat proteins was found at both interfaces exceeding the corresponding values of most of the reference proteins. Exceptionally, low dilatational moduli (typically  < 10 mN/m) were obtained for wheat fractions in the continuous and the stepwise compression experiments with no age effect (1–20 min) and almost no relaxation. Surface/interfacial activity and rheological properties observed imply that water-soluble wheat proteins are generally characterized by strong hydrophobicity and more flexible molecular structure than the reference proteins.     

Aggregation behavior and dynamics of synthetic amphiphiles that self-assemble to anion transporters

The amphiphilic heptapeptides-referred to as synthetic anion transporters (SATs)-mediate chloride transport in planar lipid bilayer membranes, synthetic liposomes, and mammalian cells. The SATs described have the general formula R1(2)NCOCH2OCH2CO-(Gly)3-Pro-(Gly)3-OR2. Substitution at R1 and R2 with various aliphatic or aromatic groups alters the ability of SATs to transport chloride through a phospholipid bilayer membrane. Despite extensive structure-activity relationship studies concerning Cl(-)-mediated transport by SATs, relatively little was known about the mechanism of insertion and pore-formation in the membrane. In the current study, the mechanistic behavior of SATs was investigated in aqueous solution and at the air-water interface. In the latter case, Langmuir trough studies and Brewster angle microscopy (BAM) revealed the extent of monolayer stability and organization for SATs. Dynamic light scattering and transmission electron microscopy (TEM) confirmed these results and defined the aggregation behavior of SATs in solution. SAT derivatives that showed low chloride transport activity organized into stable monolayers at the air-water interface, while more active SATs formed less stable monolayers. The relationship between intermolecular organization of SATs and pore-formation in the membrane is discussed along with its implications for chloride transport.     

Visible Light Mediated Halogen Atom Transfer to Access Polyhalogenated and Deuterated Lactams from Alkyl Halides

A visible light mediated protocol for the synthesis of polyhalogenated and deuterated δ- and γ-lactams from readily available alkyl halides is reported. The reaction involves the generation of haloalkyl radicals through halogen atom transfer (XAT) and subsequent arylalkylation of olefins to afford dihydroisoquinolinones and oxindoles. This new XAT protocol exhibits wide scope under mild conditions and enables access to new halogenated chemical space.     

Simultaneous Continuous Removal of Cr(VI) and Phenol from Binary Synthetic Simulated Waste Water in Tea Waste Packed Bed Column: Kinetic Modeling

In this study, simultaneous co-adsorption of Cr(VI) and phenol was carried out in a continuous packed-bed reactor packed with tea waste biomass. The experiments were carried out using binary synthetic simulated solution containing 100 mg/L of Cr(VI) and 50 mg/L of phenol. The binary synthetic solution was passed through the packed-bed reactor at different flow rates (5.46, 8.19, and 16.3 mL/min) and bed height (36, 54, 72, and 93 cm). The pH of the binary synthetic solution was 5 as the maximum simultaneous percentage removal of Cr(VI) and phenol was obtained at this pH reported in our previous study.^[1 Gupta, A. and Balomajumder, C. (2015) J. Water Proc. Eng., 6: 1–10.[Crossref] , [Google Scholar]^] The effects of flow rate and bed depth onto the simultaneous percentage removal of Cr(VI) and phenol were investigated. According to the average percentage error (?%) and average relative error (ARE %) calculated for various kinetic models reveal that Yoon–Nelson model for Cr(VI) and Thomas model for phenol best describes the experimental data. The maximum adsorption capacity of tea waste biomass in a packed-bed reactor for Cr(VI) and phenol was 57.04 and 27.96 mg/g, respectively. The packed bed of the column was regenerated using 2 N NaOH.     

Use of a “Catalytic” Cosolvent,N,N‐Dimethyl Octanamide,Allows the Flow Synthesis of Imatinib with no Solvent Switch

A general, efficient method for C?N cross‐coupling has been developed using N,N‐dimethyloctanamide as a catalytic cosolvent for biphasic continuous‐flow applications. The described method was used to generate a variety of biarylamines and was integrated into a two‐step sequence which converted phenols into biarylamines via either triflates or tosylates. Additionally, the method was applied to a three‐step synthesis of imatinib, the API of Gleevec, in good yield without the need of solvent switches.     

Catalytic Asymmetric Inverse‐Electron‐Demand 1,3‐Dipolar Cycloaddition of C,N‐Cyclic Azomethine Imines with Azlactones: Access to Chiral Tricyclic Tetrahydroisoquinolines

Reported herein is a bifunctional‐organocatalyst‐mediated enantioselective inverse‐electron‐demand 1,3‐dipolar cycloaddition of C,N‐cyclic azomethine imines with azlactones. The strategy provides concise access to enantioenriched C1‐substituted tetrahydroisoquinolines featuring a pyrazolidinone scaffold. Moreover, the scalability and practical utility of this protocol was well demonstrated by employing a gram‐scale reaction and some representative transformations.     

Developments in 1,2,5-triazepine chemistry: Reactions and synthetic applications

The chemistry of 1,2,5-triazepines and related compounds is reported. The investigated heterocycles are monocyclic and fused 1,2,5-triazepines. The different sections cover the synthesis and reactions of monocyclic and fused heterocycles incorporating 1,2,5-triazepine ring systems. This review also covers modifications of the 1,2,5-triazepines into many useful ring systems using a host of reagents and other multistep transformations. The biological evaluation of the target compounds is described, as well as the synthetic applications. The reaction mechanisms are discussed.     

New methodology for capillary electrophoresis with ESI-MS detection: Electrophoretic focusing on inverse electromigration dispersion gradient. High-sensitivity analysis of sulfonamides in waters

This article describes for the first time the combination of electrophoretic focusing on inverse electromigration dispersion (EMD) gradient, a new separation principle described in 2010, with electrospray-ionization (ESI) mass spectrometric detection. The separation of analytes along the electromigrating EMD profile proceeds so that each analyte is focused and concentrated within the profile at a particular position given by its pK_a and ionic mobility. The proposed methodology combines this principle with the transport of the focused zones to the capillary end by superimposed electromigration, electroosmotic flow and ESI suction, and their detection by the MS detector. The designed electrolyte system based on maleic acid and 2,6-lutidine is suitable to create an inverse EMD gradient of required properties and its components are volatile enough to be compatible with the ESI interface. The characteristic properties of the proposed electrolyte system and of the formed inverse gradient are discussed in detail using calculated diagrams and computer simulations. It is shown that the system is surprisingly robust and allows sensitive analyses of trace amounts of weak acids in the pK_a range between approx. 6 and 9. As a first practical application of electrophoretic focusing on inverse EMD gradient, the analysis of several sulfonamides in waters is reported. It demonstrates the potential of the developed methodology for fast and high-sensitivity analyses of ionic trace analytes, with reached LODs around 3 × 10⁻⁹ M (0.8 ng mL⁻¹) of sulfonamides in spiked drinking water without any sample pretreatment.