Synthesis and Crystal Structure of p-tert-Butylthiacalix[8]arene: A New Member of Thiacalixarenes

Even though it was obtained in poor yield, p-tert-butylthiacalix[8]arene (TC8A) has been synthesized as a new member of thiacalix[n]arenes by the terephthalate-induced cyclization of a mixture of acyclic oligomers, which was obtained by the reaction between p-tert-butylphenol and sulfur with CaO in ethylene glycol/diphenyl ether system. Slow evaporation of the chloroform solution of TC8A afforded guest-free crystals consisting of TC8A itself. The close-packed crystal structure of TC8A resembles that of p-tert-butylcalix[8]arene (C8A) closely, containing a plated loop molecular structure.This revised version was published online in July 2005 with a corrected issue number.     

关于Liesegang环形成机理的研究

本文研究了Ｌｉｅｓｅｇａｎｇ环的形成，受到两扩散电解质溶液的浓度比、离子浓度积及光照等条件影响。侧重对成环的微观汇聚过程进行了探讨。     

Synthetic receptors based on calix[4]arene functionalized at the lower rim in molecular recognition of dicarboxylic, α-hydroxycarboxylic,and α-amino acids

New calix[4]arenes, di- and tetrasubstituted at the lower rim, with different functional groups were synthesized. They were studied as carriers of a series of dicarboxylic and -hydroxycarboxylic acids through a liquid impregnated membrane. The calix[4]arenes under study are capable of molecular recognition of oxalic acid in the series of structurally similar dicarboxylic and -hydroxycarboxylic acids. The regularities found make it possible to change purposefully the receptor ability of 1,3-disubstituted calix[4]arenes by variation of the nature of substituents.     

Detection of potential membrane receptor proteins concerning circadian rhythmic leaf movement of legumes using novel photoaffinity probe compounds

Circadian rhythmic plant leaf movement, called nyctinasty, is controlled by a time-course change in the internal concentration of the leaf-movement factor in the plant body. We report that specific binding protein (210 and 180 kDa) for a leaf-movement factor, potassium lespedezate, is contained in the plasma membrane of the plant motor cell. These proteins would be potential receptors for leaf-movement factor to control the leaf movement.     

In the golden age of organocatalysis

The term "organocatalysis" describes the acceleration of chemical reactions through the addition of a substoichiometric quantity of an organic compound. The interest in this field has increased spectacularly in the last few years as result of both the novelty of the concept and, more importantly, the fact that the efficiency and selectivity of many organocatalytic reactions meet the standards of established organic reactions. Organocatalytic reactions are becoming powerful tools in the construction of complex molecular skeletons. The diverse examples show that in recent years organocatalysis has developed within organic chemistry into its own subdiscipline, whose "Golden Age" has already dawned.     

Improving MCM‐41 as a Nitrosamines Trap through a One‐Pot Synthesis

Copper oxide was incorporated into MCM‐41 by a one‐pot synthesis under acidic conditions to prepare a new mesoporous nitrosamines trap for protection of the environment. The resulting composites were characterized by XRD, N₂ adsorption–desorption, and H₂ temperature‐programmed reduction techniques, and their adsorption capabilities were assessed in the gaseous adsorption of N‐nitrosopyrrolidine (NPYR). The adsorption isotherms were consistent with the Freundlich equation. The copper salt was deposited onto MCM‐41 during the evaporation stage and was fixed on the host in the calcination process that followed. MCM‐41 was able to capture NPYR in air below 373 K but not at 453 K. Loading of copper oxide on MCM‐41 greatly improved its adsorption capability at elevated temperatures. The influence of the incorporation of copper into MCM‐41 samples and the adsorption behavior of these samples are discussed in detail.     

Asymmetric multicomponent reactions (AMCRs): the new frontier

Asymmetric multicomponent reactions involve the preparation of chiral compounds by the reaction of three or more reagents added simultaneously. This kind of addition and reaction has some advantages over classic divergent reaction strategies, such as lower costs, time, and energy, as well as environmentally friendlier aspects. All these advantages, together with the high level of stereoselectivity attained in some of these reactions, will force chemists in industry as in academia to adopt this new strategy of synthesis, or at least to consider it as a viable option. The positive aspects as well as the drawbacks of this strategy are discussed in this Review.     

Stereocontrol in Organic Synthesis Using the Diphenylphosphoryl Group

In 1959, Horner showed that metalated alkyldiphenylphosphane oxides react with aldehydes or ketones to give alkenes. With this reaction, the diphenylphosphoryl (Ph₂PO) group made its entrance into synthetic organic chemistry. In the thirty-six years since that date, extensive research has shown that this olefination, the Horner–Wittig reaction, has unique properties that make it much more than simply the phosphane oxide cousin of the more famous phosphorus-based olefinations—the Wittig reaction (based on phosphonium salts) and the Wadsworth–Emmons reaction (based on phosphonate esters). Early work on the Horner–Wittig reaction concentrated on the reactivity of phosphane oxides and the regioselectivity of their reactions, but more recently the power of the Ph₂PO group to control the stereochemistry of alkenes, and to produce “on demand” either stereoisomer in high stereochemical purity, has emerged. From the study of these stereocontrolled Horner–Wittig reactions arose the realization that the Ph₂PO group is useful not only for the control of the two-dimensional stereochemistry of alkenes, but also of three-dimensional stereochemistry in general. After a brief introduction to phosphane oxide chemistry, this review will examine the Horner–Wittig reaction, in both its original and “stereocontrolled” varieties. From there, we will move on to an account of the stereoselective construction of molecules containing the Ph₂PO group, concentrating on the stereochemical directing effects of the Ph₂PO group and on the role of its unique combination of attributes—steric bulk, electronegativity, and Lewis basicity—in controlling these reactions. Finally, we will present what is intended as a practical guide to this chemistry, covering the type of functionalized alkenes that have been made with the help of the Ph₂PO group and giving guidelines that we hope will help the organic chemist to make the most of the chemistry the Ph₂PO group has to offer.     

Oxyreactive thermal analysis

The paper presents the applicability of Oxyreactive Thermal Analysis (OTA) for the investigation of different kinds of carbon matter. For comparative reasons and more precise interpretation, along with OTA some physico-chemical properties of analyzed materials were used as the methods commonly applied for the investigations. The carbon materials of both natural (anthracites, graphite and diamonds) and synthetic origin (active carbon, glass carbon, expanded graphite, soot and synthetic diamonds) were investigated. It was stated that there is close relationship between structure parameters and physico-chemical properties and the thermal reactivity within the investigated groups of carbon matters. The results show that OTA can be accepted as a good investigative way for such materials. This revised version was published online in July 2006 with corrections to the Cover Date.     

Two-stage Off-Gel isoelectric focusing: protein followed by peptide fractionation and application to proteome analysis of human plasma

This paper presents the recently introduced Off-Gel electrophoresis (OGE) technology as a versatile tool to reproducibly fractionate intact proteins and peptides into discrete liquid fractions. The coupling of two stages of OGE, i.e., the separation of intact proteins in a first-stage followed by fractionation of peptides derived from each protein fraction after proteolysis in a second stage, results in an array of 15 x 15 fractions that are directly amenable to additional peptide fractionation like reverse-phase liquid chromatography (RPC). The analysis of all second-stage peptide fractions from only the first-stage protein fraction representing pH 5.0 -5.15 by on-line reverse-phase LC-tandem mass spectrometry resulted in the identification of 53 proteins (337 peptides), of which 10 were on different immunoglobulin (Ig) chains, with an input of only 1.5 mg human blood plasma proteins. Increasing the protein load to approximately 12 mg increased the number of identified proteins in the same protein fraction to 73 proteins (449 peptides), of which 15 were Ig-related. Immunodepletion of six of the most abundant proteins (albumin, transferrin, haptoglobin, IgG, IgA, and alpha-1-antitrypsin) prior to first-stage OGE with an input of 1.5 mg of protein (equivalent to approximately 10 mg nondepleted plasma) resulted in the identification of 81 proteins (660 peptides), of which three were still Ig fragments. The pI-based separation of peptides appears to be nonuniform based on the theoretically determined pI values of identified peptides. This observation specifically accounts for the neutral zone (pI 5-8) and can be accounted for by the physicochemical properties of the peptides given by their amino acid composition. The power of OGE separation of proteins and peptides is discussed with a focus on the use of the knowledge about the pI of proteins and peptides that assist the validation of correct identifications together with the retention time of peptides on RPC.