数值孔径与数字剪切散斑干涉条纹亮度的关系

分析了数字剪切散斑干涉条纹图的形成理论，并获得了条纹亮度与摄象机数值孔径等参数的精确关系式，从理论分析和实验验证均得出在采用小的摄象机数值孔径和３ｍＷ Ｈｅ－Ｎｅ激光器的情况下，仍可获得比较满意的数字剪切散斑干涉条纹图，理论工作及其结论对于进行数字剪切散斑干涉实验的最佳参数选择具有指导作用。     

A sagittally focusing double‐multilayer monochromator for ultrafast X‐ray imaging applications

The development of a sagittally focusing double‐multilayer monochromator is reported, which produces a spatially extended wide‐bandpass X‐ray beam from an intense synchrotron bending‐magnet source at the Advanced Photon Source, for ultrafast X‐ray radiography and tomography applications. This monochromator consists of two W/B₄C multilayers with a 25 Å period coated on Si single‐crystal substrates. The second multilayer is mounted on a sagittally focusing bender, which can dynamically change the bending radius of the multilayer in order to condense and focus the beam to various points along the beamline. With this new apparatus, it becomes possible to adjust the X‐ray beam size to best match the area detector size and the object size to facilitate more efficient data collection using ultrafast X‐ray radiography and tomography.     

超高数值孔径Schwarzschild投影光刻物镜的光学设计

针对45nm及以下节点光刻相关技术的研究需求,确定了实验型投影光刻物镜的结构型式及设计指标。依据像差理论在非同心小遮拦的Schwarzschild反射系统中添加折射补偿镜组来进一步减小系统的中心遮拦,扩大像方数值孔径。设计了一套小中心遮拦,数值孔径为1.20的Schwarzschild折反式投影光刻物镜。设计结果表明,该投影光刻物镜工作带宽为100pm,像方视场为50μm,线中心遮拦比为13%,光学分辨力为80nm时(6240lp/mm)的系统调制传递函数大于0.45,全视场最大畸变为6.5nm,满足了45nm深紫外(DUV)浸没光刻实验平台对投影光刻物镜的需求。     

180keV O6+离子与锥形玻璃毛细管相互作用研究

实验研究了强流（几个nA/mm2）180 keV O6+离子穿越微米尺度锥形玻璃毛细管的聚焦效应.结果表明,毛细管出口处束流密度比入口处束流密度增加了6~7倍,且出射离子保持原有的电荷态及能量.此外我们发现,当毛细管倾斜一定角度时,离子出射方向偏向毛细管管轴方向.基于自组织充电模型对上述实验结果进行了讨论.     

伪部分相干高斯-谢尔模型光束在湍流大气中传播的闪烁孔径平滑效应

采用光传播的数值模拟方法, 对伪部分相干高斯-谢尔模型光束大气传播过程进行数值模拟, 统计分析不同接收口径内的光强起伏特性,计算闪烁的孔径平滑因子, 讨论了表征伪部分相干光的调制相位屏的相对变化频率对闪烁指数的影响, 并将其与充分发展的部分相干高斯-谢尔模型光束及完全相干光的闪烁指数对比. 结果表明: 降低光源相干性可大幅度降低闪烁指数, 但同时其闪烁指数的孔径平滑效应减弱, 在相同接收孔径下, 伪部分相干光闪烁指数的孔径平滑效果要比完全相干光差; 增大调制相位屏的相对变化频率可在一定程度上降低闪烁指数, 随着其相对频率的增大, 伪部分相干光的闪烁指数与部分相干光的结果趋于一致. 关键词： 伪部分相干高斯-谢尔模型光束 湍流大气 孔径平滑闪烁指数 数值模拟     

Simulation on the Effect of Brownian Motion on Nanoparticle Trajectories in a Pulsed Microplasma Cluster Source

We describe a simulation of the nanoparticle trajectories in a pulsed cluster beam source. Clusters, formed by condensation of atomic vapor in a helium bath, and considered here as rigid spheres having a diameter of 1.5nm, were tracked during their travel inside the source cavity, an aerodynamic lens, and a cylindrical nozzle. Steady state supersonic laminar flow of helium is considered in an axi-symmetric geometry aiming to simulate, within some limitations, the conditions under which cluster formation takes place in a pulsed microplasma cluster source. In spite of the unsteady nature of the pulsed source, the time scale characterizing particle motion in the flow field is significantly smaller than the characteristic time constant for the evolution of gas pressure in the source. For this reason, a steady simulation can shed some light on the understanding of processes governing nanoparticle motion in a pulsed vaporization source. The extent to which the Brownian diffusion can affect the particle extraction from the source is investigated. Simulations have shown that the Brownian motion perturbs the clusters from the trajectories dictated by the carrier gas and increases the rate of cluster deposition on the source internal walls. However, it does not hinder the aerodynamic focalization produced by the lens even in nano-size cluster regime. This result is qualitatively confirmed by experiment.     

第二讲合成孔径声纳成像及其研究进展

文章在介绍了图像声纳的特点、合成孔径声纳（synthetic aperture sonar,SAS）产生背景和发展过程的基础上,对合成孔径声纳的原理、技术难点、成像算法等问题进行了讨论.着重分析了合成孔径声纳成像过程中高分辨率的获取方法、水声信道对成像的影响、多子阵技术及其成像算法、稳定的声纳运动平台和运动监测问题、运动补偿与自聚焦方法等.文章还给出了国内外合成孔径声纳研究的最新进展情况,进而展望了合成孔径声纳的应用前景.     

Application of Novel Focusing Mirrors in Gyrotron Transmission Lines

A novel focusing mirror based on the shifting of the beam phase according to the Gaussian beam optics enabled us to realize a focusing elements with different focal lengths in different directions and to convert the gyrotron output into a Gaussian-like beam. In this paper, we compare the quality of beams produced by the new system (which includes novel mirrors) and a conventional system consisting of a quasi-optical antenna, an ellipsoidal mirror and two parabolic cylinder mirrors.     

准直孔法改善束流品质初探

本文提出了用准直孔结合调节束流导引磁场获得较好品质强流电子束的方法,运用该方法在1.5MeV直线感应加速器(LIA)进行了试验,结果准直束流前后沿明显减小,束亮度提高几倍;同时,用此方法测出了束密度及束亮度的径向分布.