基于空间视角下产业协同集聚对区域创新的影响

选取2009-2018年中国30个省(市、自治区)的数据,运用区位商相对差异指数和熵权TOPSIS法分别测算其产业协同集聚度和区域创新水平,研究二三产业协同集聚对区域创新的影响.研究表明:产业集聚通过“知识技术、劳动力、物力”等外部规模经济增加创新产出;2009-2018年,两产业协同集聚水平由中西部向东部递减,区域创...     

Structural and optical properties of CuSe2 nanocrystals formed in thin solid Cu–Se film

This paper describes the structural and optical properties of Cu–Se thin films. The surface morphology of thin films was investigated by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Formation of Cu–Se thin films is concluded to proceed unevenly, in the form of islands which later grew into agglomerates. The structural characterization of Cu–Se thin film was investigated using X-ray diffraction pattern (XRD). The presence of two-phase system is observed. One is the solid solution of Cu in Se and the other is low-pressure modification of CuSe₂. The Raman spectroscopy was used to identify and quantify the individual phases present in the Cu–Se films. Red shift and asymmetry of Raman mode characteristic for CuSe₂ enable us to estimate nanocrystal dimension. In the analysis of the far-infrared reflection spectra, numerical model for calculating the reflectivity coefficient of layered system, which includes film with nanocrystalite inclusions (modeled by Maxwell-Garnett approximation) and substrate, has been applied.     

Shock cooling of liquid nitrogen and superfluid helium

Abstract

Superfluid Helium (11) and liquid nitrogen are the only liquids which have been shown experimentally, to exhibit shock cooling. In the present paper we use the Landau model to demonstrate theoretically that the roton gap, which decreases with increasing density, plays the same role leading to shock cooling in liquid helium as the dissociation energy does in liquid nitrogen.     

粒度空间约简及其粗糙集模型研究

针对交可约粒度空间中覆盖、基和粒结构的关系,结合偏序关系的哈斯图,给出一种约简粒度空间的方法.另外,通过限定上、下近似算子的取值范围,重新定义了交可约粒度空间上的粗糙集模型,并讨论了其相关性质.     

A finite volume cell‐centered Lagrangian hydrodynamics approach for solids in general unstructured grids

A finite volume cell‐centered Lagrangian hydrodynamics approach, formulated in Cartesian frame, is presented for solving elasto‐plastic response of solids in general unstructured grids. Because solid materials can sustain significant shear deformation, evolution equations for stress and strain fields are solved in addition to mass, momentum, and energy conservation laws. The total stress is split into deviatoric shear stress and dilatational components. The dilatational response of the material is modeled using the Mie‐Grüneisen equation of state. A predicted trial elastic deviatoric stress state is evolved assuming a pure elastic deformation in accordance with the hypo‐elastic stress‐strain relation. The evolution equations are advanced in time by constructing vertex velocity and corner traction force vectors using multi‐dimensional Riemann solutions erected at mesh vertices. Conservation of momentum and total energy along with the increase in entropy principle are invoked for computing these quantities at the vertices. Final state of deviatoric stress is effected via radial return algorithm based on the J‐2 von Mises yield condition. The scheme presented in this work is second‐order accurate both in space and time. The suitability of the scheme is evinced by solving one‐ and two‐dimensional benchmark problems both in structured grids and in unstructured grids with polygonal cells. Copyright © 2013 John Wiley & Sons, Ltd.     

2D Burgers equation with large Reynolds number using POD/DEIM and calibration

Model order reduction of the two‐dimensional Burgers equation is investigated. The mathematical formulation of POD/discrete empirical interpolation method (DEIM)‐reduced order model (ROM) is derived based on the Galerkin projection and DEIM from the existing high fidelity‐implicit finite‐difference full model. For validation, we numerically compared the POD ROM, POD/DEIM, and the full model in two cases of Re = 100 and Re = 1000, respectively. We found that the POD/DEIM ROM leads to a speed‐up of CPU time by a factor of O(10). The computational stability of POD/DEIM ROM is maintained by means of a careful selection of POD modes and the DEIM interpolation points. The solution of POD/DEIM in the case of Re = 1000 has an accuracy with error O(10^?3) versus O(10^?4) in the case of Re = 100 when compared with the high fidelity model. For this turbulent flow, a closure model consisting of a Tikhonov regularization is carried out in order to recover the missing information and is developed to account for the small‐scale dissipation effect of the truncated POD modes. It is shown that the computational results of this calibrated ROM exhibit considerable agreement with the high fidelity model, which implies the efficiency of the closure model used. Copyright © 2016 John Wiley & Sons, Ltd.     

Noether symmetry and conserved quantity for a Hamilton system with time delay

In this paper, the Noether symmetries and the conserved quantities for a Hamilton system with time delay are discussed. Firstly, the variational principles with time delay for the Hamilton system are given, and the Hamilton canonical equations with time delay are established. Secondly, according to the invariance of the function under the infinitesimal transformations of the group, the basic formulas for the variational of the Hamilton action with time delay are discussed,the definitions and the criteria of the Noether symmetric transformations and quasi-symmetric transformations with time delay are obtained, and the relationship between the Noether symmetry and the conserved quantity with time delay is studied. In addition, examples are given to illustrate the application of the results.     

Analytical predictions of shapes of laminar diffusion flames in microgravity and earth gravity

Flame shape is an important observed characteristic of flames that can be used to scale flame properties such as heat release rates and radiation. Flame shape is affected by fuel type, oxygen levels in the oxidiser, inverse burning and gravity. The objective of this study is to understand the effect of high oxygen concentrations, inverse burning, and gravity on the predictions of flame shapes. Flame shapes are obtained from recent analytical models and compared with experimental data for a number of inverse and normal ethane flame configurations with varying oxygen concentrations in the oxidiser and under earth gravity and microgravity conditions. The Roper flame shape model was extended to predict the complete flame shapes of laminar gas jet normal and inverse diffusion flames on round burners. The Spalding model was extended to inverse diffusion flames. The results show that the extended Roper model results in reasonable predictions for all microgravity and earth gravity flames except for enhanced oxygen normal diffusion flames under earth gravity conditions. The results also show trends towards cooler flames in microgravity that are in line with past experimental observations. Some key characteristics of the predicted flame shapes and parameters needed to describe the flame shape using the extended Roper model are discussed.     

Application of DEM modified with enlarged particle model to simulation of bead motion in a bead mill

We applied the discrete element method （DEM） of simulation modified by an enlarged particle model to simulate bead motion in a large bead mill. The stainless-steel bead mill has inner diameter of 102 mm and mill length of 198 mm. The bead diameter and filling ratio were fixed respectively at 0.5 mm and 85%. The agitator rotational speed was changed from 1863 to 3261 rpm. The bead motion was monitored experimentally using a high-speed video camera through a transparent mill body. For the simulation, enlarged particle sizes were set as 3-6 mm in diameter. With the DEM modified by the enlarged particle model, the motion of enlarged particles in a mill was simulated.The velocity data of the simulated enlarged particles were compared with those obtained in the experiment. The simulated velocity of the enlarged particles depends on the virtual frictional coefficient in the DEM model. The optimized value of the virtual frictional coefficient can be determined by considering the accumulated mean value. Results show that the velocity of the enlarged particles simulated increases with an increase in the optimum virtual frictional coefficient, but the simulated velocity agrees well with that determined experimentally by optimizing the virtual frictional coefficient in the simulation. The computing time in the simulation decreases with increased particle size.     

Mathematical modeling of electromagnetic wave propagation in heterogeneous lossy coaxial cables with variable cross section

In this work, we focus on the time-domain simulation of the propagation of electromagnetic waves in non-homogeneous lossy coaxial cables. The full 3D Maxwell equations, that described the propagation of current and electric potential in such cables, are classically not tackled directly, but instead a 1D scalar model known as the telegraphist's model is used. We aim at justifying, by means of asymptotic analysis, a time-domain “homogenized” telegraphist's model. This model, which includes a nonlocal in time operator, is obtained via asymptotic analysis, for a lossy coaxial cable whose cross section is not homogeneous.