Swirl effects on variable-density jet mixing in confined flows

An experimental investigation on swirl effects on inhomogeneous confined jet mixing in a combustor configuration is reported. The confined swirling flow was simulated by a swirler with a central jet mounted in a cyclindrical tube. Helium and air jets set at different velocities were injected into the confined swirling air flow. The resulting flow fields due to two vane swirlers with constant vane angles of 35° and 66° were compared. Results show that the 35° vane swirler produces a solid-body rotation core with a slope about twice that created by the 66° vane swirler. It is the behavior of this solid-body rotation core that determines jet mixing rather than the swirler vane angle. Consequently, the coaxial jet decays much faster, the mixing is more intense, and the turbulence intensities are higher for the 35° vane swirler. In view of these results, combustor designers should be more concerned with behavior of the solid-body rotation core produced by the swirler, instead of the swirler vane angle.     

管内湍流旋流的数值计算

本文用有限差分法对直管内的湍流旋流进行了数值模拟。计算中采用Ｂｏｕｓｓｉｎｅｓｑ湍流涡粘性假设的基本思想和Ｋ－ε双方程模型来求解雷诺应力各分量。为了反映旋流中湍流转输的非均匀性和各向异性特征，对雷诺应力各分量及与之相主尖的各湍流粘性系数分别进行计算。计算结果表明该模型能较好地反映直管内湍流旋流的流动结构。     

On Solutions of Some Non-Linear Differential Equations Arising in Newtonian and Non-Newtonian Fluids

Some steady as well as unsteady solutions of the equations of motion for an incompressible Newtonian and non-Newtonian (second-grade) fluids are obtained by applying different methods including the Lie symmetry group method. The flows considered are axially symmetric with the swirling motion, and the governing equations for second-grade fluid flow have been modeled. Expressions for streamlines, velocity and vorticity components are constructed explicitly in each case. Exact analytical solutions in second-grade fluid are obtained and compared with the corresponding viscous solutions.     

Numerical study of hysteresis in annular swirling jets with a stepped‐conical nozzle

This study investigates the experimentally observed hysteresis in the mean flow field of an annular swirling jet with a stepped‐conical nozzle. The flow is simulated using the Reynolds‐averaged Navier–Stokes (RANS) approach for incompressible flow with a k–ε and a Reynolds stress transport (RSTM) turbulence model. Four different flow structures are observed depending on the swirl number: ‘closed jet flow’, ‘open jet flow low swirl’, ‘open jet flow high swirl’ and ‘coanda jet flow’. These flow patterns change with varying swirl number and hysteresis at low and intermediate swirl numbers is revealed when increasing and subsequently decreasing the swirl. The influence of the inlet velocity profile on the transitional swirl numbers is investigated. When comparing computational fluid dynamics with experiments, the results show that both turbulence models predict the four different flow structures and the associated hysteresis and multiple solutions at low and intermediate swirl numbers. Therefore, a good agreement exists between experiments and numerics. Copyright © 2006 John Wiley & Sons, Ltd.     

A Series Solution of the Unsteady Von Kármán Swirling Viscous Flows

A new analytic technique is applied to solve the unsteady viscous flow due to an infinite rotating disk, governed by a set of two fully coupled nonlinear partial differential equations deduced directly from the exact Navier-Stokes equations. The system of coupled nonlinear partial differential equations is replaced by a sequence of uncoupled systems of linear ordinary differential equations. Different from all other previous analytic results, our series solution is accurate and valid for all time in the whole spatial region. Accurate expressions for skin friction coefficients are given, which are valid for all time. Such kind of series solutions have not been reported, to the best of our knowledge.      

用统一二阶矩模型模拟强旋湍流气粒两相流动的初探

本文初步探索用统一二阶矩（USM）两相湍流模型及K-ε-kp模型预报旋流数为1.5的轴向-切向进风、轴向供粉的强旋气粒两相流动，预报结果与实验的对比表明，USM模型在预报强族流动两相时平均切向速度场上优于K-ε-Kp模型，并且能够合理地给出与实验定性一致的两相湍流脉动的各向异性．     

几种二阶矩模型模拟湍流旋流燃烧的比较

本文对几种二阶矩湍流反应模型,包括统一二阶矩模型、只考虑温度脉动的二阶矩模型、只考虑浓度脉动关联的二阶矩模型、及同时考虑温度脉动和浓度脉动关联的二阶矩模型,进行了比较。将上述模型加入到FLUENT6.0软件平台上,模拟了不同旋流数下甲烷-空气的旋流燃烧。模拟结果和实验结果进行了比较,探讨了各关联量大小及其对时平均反应率的影响。结果表明,统一二阶矩湍流反应模型具有最好的模拟效果。其原因是,各种关联矩中,化学反应率系数与浓度间的脉动关联最重要。     

圆环旋转黏性液体射流破碎液滴粒径与速度数量密度分布相关性研究

压力旋流喷嘴被广泛应用于航空发动机、船用发动机、车用汽油缸内直喷发动机、燃气轮机等动力机械的燃油喷射系统中.以压力旋流喷嘴射流为研究对象,开展了圆环旋转黏性液体射流破碎液滴粒径与速度数量密度分布相关性问题研究.对于液体射流,以往的研究往往对破碎液滴粒径数量密度分布或速度数量密度分布进行单独研究,对于这两种数量密度分布之间关系的研究较少;从相关性的角度对圆环旋转黏性液体射流破碎液滴粒径与速度数量密度分布之间的关系进行研究.采用最大熵原理方法建立了圆环旋转黏性液体射流破碎液滴粒径与速度联合概率密度函数.对圆环旋转黏性液体射流破碎液滴粒径与速度联合概率密度函数进行了讨论,对圆环旋转黏性液体射流破碎液滴粒径数量密度分布与速度数量密度分布的相关性问题进行了研究.研究结果表明,为了给出正确的圆环旋转黏性液体射流破碎液滴粒径与速度联合概率密度函数,射流守恒约束条件中必须同时包括质量守恒定律、动量守恒定律以及能量守恒定律;破碎液滴粒径的数量密度分布与速度数量密度分布密切相关;射流旋转强度对破碎液滴粒径数量密度与速度数量密度分布结构影响不大,对破碎液滴粒径数量密度和速度数量密度的分布区域影响较大.      

超临界CO2直旋混合射流破岩特性的实验研究

超临界二氧化碳(CO₂)射流破岩既能降低岩石门限压力又能有效保护储层,直旋混合射流兼具直射流和旋转射流特点可提高破岩效率,基于此提出了超临界CO₂直旋混合射流的破岩方法。为了揭示超临界CO₂直旋混合射流破岩特性,设计加工出叶轮式直旋混合射流喷嘴,通过岩石定点冲击破碎实验对比了该射流与常规水射流的破岩效果,并研究了叶轮长度、叶轮中心孔直径、混合腔长度、喷射距离、射流压力等重要参数对超临界CO₂直旋混合射流破岩效果的影响。结果表明:相同实验条件下,该射流方法的平均破岩能力比常规水射流提高了42.9%;超临界CO₂直旋混合射流破岩易出现较大体积岩屑崩落现象;随着叶轮长度、混合腔长度、喷射距离的增大破岩效果均先增强后减弱,实验条件下上述参数存在最优范围值;叶轮中心孔直径的增大会导致岩石破碎孔深度增加、直径减小;随着射流压力的升高,超临界CO₂直旋混合射流破岩效果有着较为明显的提升。研究结果可为超临界CO₂直旋混合射流破岩方法的进一步研究提供实验依据。     

H2/air旋流预混燃烧的流场特性和火焰结构分析

本文采用完全可压缩的N-S方程,对当量比为1.0的H₂/air旋流预混火焰进行了直接数值模拟研究。氢气和空气的化学反应采用9种组分19步的详细机理。模拟结果表明,强旋流流场中存在回流区,碗形旋流火焰稳定在回流区的外围。在火焰面上沿火焰法向提取了局部火焰结构,将局部湍流火焰结构与层流预混火焰的火焰结构进行了比较,发现局部湍流火焰比层流预混火焰更薄,燃烧强度更高。