Association,emulsifying, and solubilization properties of amphiphilic hyperbranched poly(acrylic acid) with short polystyrene stickers

Amphiphilic hyperbranched copolymer chains made of large hyperbranched poly(acrylic acid) cores grafted with short polystyrene stickers (HB‐PAA_n‐g‐PS_{n + 1}) with different n values (n = 1, 10, 47) were well prepared and confirmed by size exclusion chromatography, Fourier transform infrared spectroscopy and ¹H nuclear magnetic resonance. The study on the interchain association behavior of these amphiphilic chains indicates that larger HB‐(PAA)_n‐g‐(PS)_{n + 1} copolymer chains have a less tendency to undergo interchain association. Moreover, the simple vial‐inversion and rheological experiments show that the apparent critical gel concentration (C_g) decreases with n, but no sol–gel transition was observed for triblock PS‐PAA‐PS even when the concentration is up to 200 g L^?1. Further transmission electron microscopy study of the latex particles prepared with HB‐(PAA)_n‐g‐(PS)_{n + 1} as surfactant reveals that the latex particles are spherical and narrowly dispersed; while the measured latex particle number (N_p) indicates the surfactant efficiency of HB‐(PAA)₄₇‐g‐(PS)₄₈ is poorer than that of triblock PS‐PAA‐PS (n = 1). Finally, pyrene solubilization measurement shows the solubilization efficiency of HB‐(PAA)_n‐g‐(PS)_{n + 1} copolymers decreases with n, consistent with the previous observed interchain association result. The present study demonstrates that both the chain topology and the styrene weight fraction dominates the final solution properties of amphiphilic HB‐(PAA)_n‐g‐(PS)_{n + 1} chains in aqueous solution. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 128–138     

地球化学模拟在高放废物地质处置中的应用与发展

随着核能事业的发展,高放废物的处理和处置问题日益突出.其中,研究高放废物在环境介质中的吸附、扩散和迁移行为是获取放射性核素对周围环境和人群健康影响的基础参数的最重要和最直接的途径.近年来,人们利用已有的实验数据及核素的基础热力学和动力学数据,附以相应的数学模型,建立了一些地球化学模拟软件,用于分析核素在地质介质中可能发生的连续性和长期性变化.目前,国内外常用的地球化学模拟软件有十多种.本文从热力学平衡计算原理、种态分布计算方法和表面配位模型假设等几个方面对地球化学模拟软件进行了简要介绍,对近年来地球化学模拟软件在核素种态分布计算和表面配位模型模拟两方面的应用进行了举例分析,并以Ca-U-CO3配合物为例,说明完备的热力学数据对地球化学模拟软件发展的重要性,以期促进我国地球化学模型的应用和发展.     

Hydrogen Spillover Enhanced Hydroxyl Formation and Catalytic Activity Toward CO Oxidation at the Metal/Oxide Interface

H₂‐promoted catalytic activity of oxide‐supported metal catalysts in low‐temperature CO oxidation is of great interest but its origin remains unknown. Employing an FeO(111)/Pt(111) inverse model catalyst, we herewith report direct experimental evidence for the spillover of H(a) adatoms on the Pt surface formed by H₂ dissociation to the Pt?FeO interface to form hydroxyl groups that facilely oxidize CO(a) on the neighboring Pt surface to produce CO₂. Hydroxyl groups and coadsorbed water play a crucial role in the occurrence of hydrogen spillover. These results unambiguously identify the occurrence of hydrogen spillover from the metal surface to the noble metal/metal oxide interface and the resultant enhanced catalytic activity of the metal/oxide interface in low‐temperature CO oxidation, which provides a molecular‐level understanding of both H₂‐promoted catalytic activity of metal/oxide ensembles in low‐temperature CO oxidation and hydrogen spillover.     

Computational-Based Approach for Predicting Porosity of Electrospun Nanofiber Mats Using Response Surface Methodology and Artificial Neural Network Methods

Comparative studies between response surface methodology (RSM) and artificial neural network (ANN) methods to find the effects of electrospinning parameters on the porosity of nanofiber mats is described. The four important electrospinning parameters studied included solution concentration (wt.%), applied voltage (kV), spinning distance (cm) and volume flow rate (mL/h). It was found that the applied voltage and solution concentration are the two critical parameters affecting the porosity of the nanofiber mats. The two approaches were compared for their modeling and optimization capabilities with the modeling capability of RSM showing superiority over ANN, having comparatively lower values of errors. The mean relative error for the RSM and ANN models were 1.97% and 2.62% and the root mean square errors (RMSE) were 1.50 and 1.95, respectively. The superiority of the RSM-based approach is due to its high prediction accuracy and the ability to compute the combined effects of the electrospinning factors on the porosity of the nanofiber mats.     

Behavior of metal complexes of polyacrylic acid in solutions

Metal complexes of polyacrylic acid containing Li, Li, and Cu, or Li and Zn have been studied in saline aqueous solutions using molecular hydrodynamics and light scattering methods. Intrinsic viscosities, weight-average molar masses, hydrodynamic radii, and radii of gyration were obtained. It was shown that the macromolecules of polymetalloacrylates containing divalent metals form small and large supramolecular structures, their dimensions, and composition being dependent on the ionic strength of the solution.     

Enhancement of Photocatalytic Activity for Hydrogen Production by Surface Modification of Pt-TiO2 Nanoparticles with a Double Layer of Photosensitizers

To investigate the effect of the surface structure of dye-sensitized photocatalyst nanoparticles, we prepared three types of Ru^II-photosensitizer (PS)-double-layered Pt-cocatalyst-loaded TiO₂ nanoparticles with different surface structures, Zr- RuCP⁶ -Zr- RuP⁶ @N wt %Pt-TiO₂, RuCP⁶ -Zr- RuP⁶ @N wt %Pt-TiO₂, and RuCP² -Zr- RuP⁶ @N wt %Pt-TiO₂ (N=0.2, 1, and 5), and evaluated their photocatalytic H₂ evolution activity in the presence of redox-reversible iodide as the electron donor. Although the driving force of the electron injection from I⁻ to the photo-oxidized Ru^III PS is comparable, the activity increased in the following order: RuCP² -Zr- RuP⁶ @1 wt %Pt-TiO₂ < RuCP⁶ -Zr- RuP⁶ @1 wt %Pt-TiO₂ < Zr- RuCP⁶ -Zr- RuP⁶ @1 wt %Pt-TiO₂. The apparent quantum yield of Zr- RuCP⁶ -Zr- RuP⁶ @1 wt %Pt-TiO₂ in the first hour reached 1 %. Zeta-potential measurements suggest that the surface Zr⁴⁺-phosphate groups attracted I⁻ anions to the nanoparticle–solution interface. Our results indicate that the surface modification of dye-sensitized photocatalysts is a promising approach to enhance photocatalytic activity with various redox mediators.     

The (S−1,S) inventory model and its counterparts in queueing theory

We explore the relationship between the ($S?1,S$) inventory model and three well-known queueing models: the Erlang loss system, the machine-repair model and a two-node Jackson network. Exploiting this relationship allows us to obtain key performance measures of the ($S?1,S$) model, like the so-called virtual outdating time, the number of items on the shelf in steady state, the long-run rate of unsatisfied demands and the distribution of the empty shelf period.     

过载作用下聚乙烯疲劳裂纹扩展行为研究

论文针对中密度聚乙烯材料(MDPE)，采用平板试样进行了I型疲劳裂纹扩展和单次过载下裂纹扩展试验．发现与金属材料类似，单次拉伸过载对聚乙烯(PE)的疲劳裂纹扩展有明显的迟滞作用，降低了裂纹扩展速率．试验还通过变载荷刻线法获取疲劳裂纹扩展前缘的实际形貌和变化规律，对常规变载荷刻线方法进行了调整和验证，其修正方法对高分子材料的疲劳裂纹扩展前缘刻线具有较好的效果．通过观察发现含楔形塑性区的裂尖钝化是裂纹迟滞的主要原因．过载引入的塑性区内残余应力对裂纹迟滞也起了重要作用．论文利用Dugdale模型计算了塑性区尺寸，使用基于残余应力的Wheeler模型对过载迟滞进行了很好的拟合．