6H-SiC衬底片的表面处理

相比于蓝宝石,6H-SiC是制作GaN高功率器件更有前途的衬底.本文研究了表面处理如研磨、化学机械抛光对6H-SiC衬底表面特性的影响.用显微镜、原子力显微镜、拉曼光谱、卢瑟福背散射谱表征了衬底表面.结果表明经过两步化学机械抛光后提高了表面质量.经第二步化学机械抛光后的衬底具有优异的表面形貌、高透射率和极小的损伤层,其表面粗糙度RMS是0.12nm.在该衬底上用MOCVD方法长出了高质量的GaN外延膜.     

不同晶形纳米碳酸钙的制备及其表面改性研究进展

本文综述了不同晶形纳米碳酸钙的制备方法、纳米碳酸钙表面改性技术的研究现状以及表面改性方法,分析了目前纳米碳酸钙制备及表面改性技术存在的问题,并对其发展前景作了展望.     

Effect of Erosive Agents on Surface Characteristics of Nano-Fluorapatite Ceramic: An In-Vitro Study

Erosive beverages cause dissolution of natural teeth and intra-oral restorations, resulting in surface characteristic changes, particularly roughness and degradation. The purpose of this study was to evaluate the surface roughness and topography of a dental ceramic following immersion in locally available erosive solutions. A total of 160 disc specimens of a nano-fluorapatite type ceramic (12 mm diameter and 2 mm thickness) were fabricated and equally distributed into two groups (n = 80) and then evenly distributed among the following five testing groups (n = 16): lemon juice, citrate buffer solution, 4% acetic acid, soft cola drink, and distilled water which served as a control. The surface roughness (Ra) and topography were evaluated using a profilometer and scanning electron microscope at baseline, 24 h, 96 h, and 168 h respectively. Data were analyzed using ANOVA and Tukey’s multiple comparisons (p ≤ 0.05). Surface changes were observed upon exposure to all acidic beverages except distilled water. Amongst all immersion media, 4% acetic acid produced the most severe surface roughness across all time periods (i.e., baseline, 24 h, 96 h, and 168 h). A statistically significant difference in the surface roughness values between all immersion media and across all four time intervals was observed. Erosive agents had a negative effect on the surface roughness and topography of the tested ceramic. The surface roughness increased with increased storage time intervals.     

Numerical Study on an RBF-FD Tangent Plane Based Method for Convection–Diffusion Equations on Anisotropic Evolving Surfaces

In this paper, we present a fully Lagrangian method based on the radial basis function (RBF) finite difference (FD) method for solving convection–diffusion partial differential equations (PDEs) on evolving surfaces. Surface differential operators are discretized by the tangent plane approach using Gaussian RBFs augmented with two-dimensional (2D) polynomials. The main advantage of our method is the simplicity of calculating differentiation weights. Additionally, we couple the method with anisotropic RBFs (ARBFs) to obtain more accurate numerical solutions for the anisotropic growth of surfaces. In the ARBF interpolation, the Euclidean distance is replaced with a suitable metric that matches the anisotropic surface geometry. Therefore, it will lead to a good result on the aspects of stability and accuracy of the RBF-FD method for this type of problem. The performance of this method is shown for various convection–diffusion equations on evolving surfaces, which include the anisotropic growth of surfaces and growth coupled with the solutions of PDEs.     

Bioactive Components and Anticancer Activities of Spray-Dried New Zealand Tamarillo Powder

Tamarillo fruit contains many phytochemicals that have beneficial therapeutic and nutritional properties. Spray-drying is widely used to preserve fruit puree in powder form. However, to obtain high-quality fruit powder, the optimisation of spray-drying conditions is necessary, as a high drying temperature can damage sensitive bioactive compounds. This study investigated the effects of spray-drying on the microstructure, polyphenolics, total flavonoids, total carotenoids, antioxidant activity, and anticancer capacity of tamarillo powder. Response surface methodology (RSM) was used to optimise the spray-drying process to produce tamarillo powder. The independent variables were inlet drying temperature (120–160 °C), flow rate (1–5 g/mL), and maltodextrin concentration (0–10%). These variables influenced the microstructural attributes, bioactive components, and cytotoxicity of the spray-dried tamarillo powder. The increase in polyphenols and antioxidant activities were favoured under high-temperature spray drying conditions and a low carrier concentration. The optimised spray-drying conditions for producing tamarillo powder with high antioxidant and anticancer activities, high yield, and stable bioactive compounds were found to be at 146.8 °C inlet temperature, and a flow rate of 1.76 g/mL.     

New Cysteine-Containing PEG-Glycerolipid Increases the Bloodstream Circulation Time of Upconverting Nanoparticles

Upconverting nanoparticles have unique spectral and photophysical properties that make them suitable for development of theranostics for imaging and treating large and deep-seated tumors. Nanoparticles based on NaYF₄ crystals doped with lanthanides Yb³⁺ and Er³⁺ were obtained by the high-temperature decomposition of trifluoroacetates in oleic acid and 1-octadecene. Such particles have pronounced hydrophobic properties. Therefore, to obtain stable dispersions in aqueous media for the study of their properties in vivo and in vitro, the polyethylene glycol (PEG)-glycerolipids of various structures were obtained. To increase the circulation time of PEG-lipid coated nanoparticles in the bloodstream, long-chain substituents are needed to be attached to the glycerol backbone using ether bonds. To prevent nanoparticle aggregation, an L-cysteine-derived negatively charged carboxy group should be included in the lipid molecule.     

基于孔口出流模型的实验研究及理论分析

基于孔口出流模型对底部有小孔的圆柱体容器中液体液面高度随时间的变化规律进行了实验研究,并通过计入液体表面张力引起的孔口收缩和流体黏滞力导致的能量损失对实验结果进行了理论分析,与实验结果一致.     

Preparation of nano-hydroxyapatite/poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide) biocomposite microspheres

Nano-hydroxyapatite (HA)/poly(l-lactide) (PLLA) composite microspheres with relatively uniform size distribution were prepared by a solid-in-oil-in-water (s/o/w) emusion solvent evaporation method. The encapsulation of the HA nanopaticles in microshperes was significantly improved by grafting PLLA on the surface of the HA nanoparticles (p-HA) during emulsion process. This procedure gave a possibility to obtain p-HA/PLLA composite microspheres with uniform morphology and the encapsulated p-HA nanoparticle loading reached up to 40 wt% (33 wt% of pure HA) in the p-HA/PLLA composite microspheres. The microstructure of composite microspheres from core-shell to single phase changed with the variation of p-HA to PLLA ratios. p-HA/PLLA composite microspheres with the diameter range of 2–3 μm were obtained. The entrapment efficiency of p-HA in microspheres could high up to 90 wt% and that of HA was only 13 wt%. Surface and bulk characterizations of the composite microspheres were performed by measurements such as wide angle X-ray diffraction (WAXD), thermal gravimetric analysis (TGA), environmental scanning electron microscope (ESEM) and transmission electron microscopy (TEM).     

Subsurface layers with degenerate hole gas arising in germanium immersed into liquid helium under 60Co-gamma irradiation

Abstract

The subsurface layers with quasi-metal hole conductivity have been observed in n- and p-Ge immersed into liquid He under the ⁶⁰Co-gamma-irradiation. three conditions are to be fulfilled simultaneously for the production of the layers: low temperature, direct contact between helium and germanium and gammairradiation.     

Monte Carlo simulation of GM probe and NaI detector efficiency for surface activity measurements

This paper deals with the direct measurement of total (fixed plus removable) surface activity in the presence of interfering radiation fields. Two methods based on Monte Carlo simulations are used: one for a Geiger–Muller (GM) ionisation probe and the other for sodium iodide (NaI) detector with lead collimators; equations for the most general case and the geometry models for Monte Carlo simulation of both (GM and NaI) detectors are employed. Finally, an example of application is discussed.