Optimization of the Conditions for the Cr (III) Adsorption on Activated Carbon

In order to understand the patterns of the adsorption equilibrium of Cr (III) on activated carbon, the adsorption process was studied by two different ways: classical batch experiments on commercial Norit and Merck activated carbons and their oxidized forms in a wide range of pHs; and extended time-based tests at the same pH values on the same adsorbents. This approach allowed us to understand the role of texture, chemical carbon surface functionality and experimental conditions (initial pH of the solution, contact time and adsorbate/adsorbent ratio) on the effectiveness of Cr (III) removal. The adsorption process of Cr (III) at (24 ± 1^∘C) on Merck and Norit activated carbons and their oxidized forms were studied at pH values between 1.5 and 5 (either adjusted or buffered). Chromium concentration was fixed at 200 ppm. The carbon loading ranged from 1.2 to 20 g/l. The carbon/Cr (III) solution contact time was varied from 0.5–1 month to 5 months, to ensure that the saturation of the carbon level was reached. According to the data obtained, the presence of carboxylic groups on carbon surface seems to enhance Cr (III) uptake at initial pH of the solution in the range between 2 and 4. Depending on the nature of the adsorbent surface chemistry, the contact time to reach equilibrium may range from 3 to 5 months. There is an optimum carbon loading which limits the Cr (III) uptake/removal at given pH value. In order to understand the adsorption process, an ion exchange, surface complex and surface precipitation were considered. This paper was presented in the 5th Brazilian Meeting on Adsorption, held at Natal, Brazil, 18-21 July, 2004.     

MoO3、NiO、ZnO在小表面金红石上的分散行为

Dispersion of MoO3, NiO, ZnO on rutile TiO2 with low specific surface area was studied with Mercury Porosimeter, SEM, XPS and Ammonia Extraction method. The dispersion thresholds of MoO3, NiO, ZnO on three rutile TiO2 carriers were obtained with XPS, and com-pared with those on anatase TiO2 with high specific surf are area. Ammonia Extraction method was used to identify the surface oxide species interarting with support surface in different strength and it was found that the proportions of oxides that can not be extracted by ammonia extraction are different for MoO3, NiO and ZnO which are supported on rutile TiO2.     

Isomers of C20: an energy profile III

Semiempirical calculations, at the PM3 level provided within the Winmopac v2.0 software package, are used to geometrically optimize and determine the absolute energies (heats of formation) of a variety of C(20) isomers that are predicted to exist in and around the ring and cage isomers. Using the optimized Cartesian coordinates for the ring and the cage isomers, a saddle-point calculation was performed. The resulting energy profile, consisting of a series of peaks and valleys, is used as a starting point for the identification and location of fifteen additional isomers of C(20) that are predicted to be energetically stable, both via geometry optimizations and force constant analysis. These additional isomers were subsequently determined to lie adjacent to one another on the potential surface and establish a step-wise transformation between the ring and the cage. Transition-state optimization of the Cartesian coordinates at the saddle point between adjacent isomers was performed to quantify the energy of the transition state. The step-wise process from one isomer to another, which extends out over the three-dimensional surface, is predicted to require approximately 15% less energy than that of the direct, two-dimensional transformation predicted in the bowl-cage profile. However, the net atomic rearrangement for the step-wise process is about four times greater than that of the direct process. Although less in energy, the amount of atomic rearrangement in the step-wise process would make the occurrence of such a route prohibitive. Utilizing the direct distance separating the three primary isomers (ring, bowl, cage), the method of triangulation is performed to quantitatively position other C(20) structures on the potential surface, relative to the ring, bowl, and cage isomers.     

The Surface Imprinted Polystyrene Beads Prepared via Emulsion Templates

In this paper, the surface imprinted cross-linked polystyrene beads were prepared via suspension polymerization with styrene (St), divinylbezene (DVB), polyvinyl alcohol (PVA1788),the mixture of Span 85 and xylene or the mixture of Span 85 and paraffin as monomer,cross-linking agent, dispersion stabilizer and templates, respectively. The results indicate that there are dense cavities on the surface of beads, and the diameter and density of cavity are related with the composition and amount of emulsion template. The forming mechanism of cavity from thermodynamics and dynamics was proposed.     

Control of optical properties of gel-derived oxide coating films containing fine metal particles

Control of the optical properties of gel-derived oxide films containing fine metal particles is described. The duration of the aging of Si(OC₂H₅)₄-derived sols and the amount of water for hydrolyzing Si(OC₂H₅)₄ were found to greatly affect the size and the shape of Au particles formed in the silica matrix, and accordingly the optical absorption of the Au/SiO₂ composite films. Employing dielectric media with high refractive indices like TiO₂ was shown to shift the absorption peak of Au particles to longer wavelengths. Pd/TiO₂ and Pt/TiO₂ composite films showed absorption in the visible region.     

Computer simulation of conformational movement based on interconversion phenomena

A computer method has been developed which is an alternative to molecular dynamics in the sense that it pictures conformational motion. It simulates propagation in conformational movement based on conformational interconversion phenomena. The method starts with the knowledge of the topology of the conformational potential energy hyper-surface, which is described by the minima and the transition states. The topology is obtained by the recently described software . The simulation of conformational motion is based on the Boltzmann statistics of movement between the minima and the transition states at a given temperature. The method is illustrated for methyl--glucopyranoside and - -galNAc(1-3)[- -Fuc(1-2)]Gal-O-Me molecules. Conformational transitions of hydroxyl groups as well as glycosidic linkages are discussed.     

Surfaces and interfaces in short-period GaAs/AlAs superlattices

Photoelectron spectroscopy, in particular the angular resolved photoemission excited by ultraviolet radiation (ARUPS), provides the most direct experimental information about the electron structure of crystals, both of the bulk and of the low-index surfaces. The sensitivity of the method, as well as its difficulties, when applied to GaAs/AlAs superlattices are described. The new periodicity of these man-made crystals in the direction of their growth (e.g., in the layer-by-layer growth in molecular beam epitaxy), is responsible for opening of the new energy gaps (so-called minigaps) in the electron energy bands of crystals forming the superlattice. In addition to the well-known confinement of electrons at the valence and conduction band edges in long-period superlattices, the electron confinement to the interfaces has also been found in the vicinity of minigaps in short-period superlattices. The role of this confinement in the intensities of electrons photoemitted from superlattice surfaces is discussed. Superlattices with different thicknesses in the topmost layers represent systems with a simple change of the surface atomic structure. The predictions of one-dimensional models about a change of the surface-state energy within the band gap with a change of crystal potential termination are tested for the ideally terminated (1 0 0) surface of a very thin superlattice (GaAs)₂(AlAs)₂. The results of the energy distributions of photoemitted electrons, calculated in the one-step model of photoemission, show that the ARUPS experimental observation of surface-state shifts should be possible, at least in larger minigaps. The results indicate the possibility of a straightforward tuning of the electronic structure of the superlattice surface by geometrical means.     

Effects of type of adsorption isotherms on parallel diffusion of sulfonated dyes into porous cellulose membrane

Transport phenomenon of three sulfonated azo dyes, C.I. Acid Red 88, C.I. Direct Yellow 12, and C.I. Direct Blue 15 into water-swollen cellulose membranes has been analyzed on the basis of parallel transport theory by surface and pore diffusion. Langmuir equation was applied into the mass balance equation to estimate dye concentration in the pores. The results were compared with the results obtained by applying Freundlich equation in our previous papers. The surface diffusivity (D _s) and the pore diffusivity (D _p) for the parallel diffusion model obtained by applying Langmuir equation agreed with those obtained by applying Freudlich equation. The theoretical concentration profiles for parallel diffusion calculated usingD _s andD _p coincided accurately with the experimental data when we applied either Langmuir or Freundlich equations.     

An electronic structure investigation of the BNO-BON-NBO system

The potential energy hypersurface of the ground triplet states of the BNO-BON-NBO system has been investigated using traditional ab initio electronic structure theory. The molecules studied have the molecular formula BON and include three linear and three angular species, and two transition states for the isomerization of an angular N-B-O to an angular B-O-N and a linear B-NO, respectively. All stationary points on the BNO-BON-NBO isomerization potential energy surface have been characterized employing UMP2, UMP4, and Gaussian-2 (G2) theory with the 6-311G(d), 6-311G(2d), and TZ2P basis sets. The isomerization for an angular N-BO to the linear B-NO has a lower energy barrier than that of the former to an angular B-ON. Energetics are presented with G2 energies. Two sets of resonance structures for both bent B-NO (boron nitrosyl) and B-ON (boron isonitrosyl) were proposed and the bonding in the two species was analyzed. For the purpose of comparison, the density functional theory based hybrid methods B3LYP/6-311G(d) and B3LYP/TZ2P have also been applied to both geometry optimization and single-point calculations. It is found that the B3LYP prediction of the nature of the linear B-O is contradictory to that made by all MPn(n = 2 and 4) calculations. The cause for this contradiction is discussed.     

Transient multi pulse method for the determination of N2O - interaction with ZSM-5 type zeolites

Summary Multipulse experiments reveal qualitative and quantitative, time-resolved information about the interaction of N₂O with ZSM-5 type zeolites under conditions of catalytic applications, like the mechanism of N₂O decomposition, amount and reactivity of an atomic surface oxygen species.