混合效应模型中的D-最优设计

本研究的是混合效应-Ⅱ模型，首先，给出二阶模型存在D-最优回归设计点的必要条件。其次，组合D-最优回归设计和D-最优区组设计BIBD构造D-最优设计并给出寻找新的D-最优设计点的方法。以两种有代表性的组合误差分布为例，阐明新的D-最优设计点的获得过程，并给出了数值结果。     

Tensor Products of Quantum Structures and Their Applications in Quantum Measurements

Tensor products of quantum logics and effect algebras with some known problems are reviewed. It is noticed that although tensor products of effect algebras having at least one state exist, in the category of complex Hilbert space effect algebras similar problems as with tensor products of projection lattices occur. Nevertheless, if one of the two coupled physical systems is classical, tensor product exists and can be considered as a Boolean power. Some applications of tensor products (in the form of Boolean powers) to quantum measurements are reviewed.     

向列液晶表面弹性能K13项的物理效应及检验方法

通过解析推导和数值计算的方法，得到了平衡态指向矢满足的微分方程和边界条件.研究了表面弹性能K13项对磁场作用下的弱锚定向列液晶盒Fréedericksz转变性质的影响.结果表明，表面弹性能K13项的存在对液晶系统的自由能有很大的影响，从而改变转变的性质，诱导液晶盒在阈值点发生一级Fréedericksz转变.给出了发生一级转变的物理条件，它除了与液晶的结构和材料有关外，还依赖于液晶表面弹性能K13项，同时给出了由此判断K13项是否存在的检验方法. 关键词： 表面弹性能K13项 弱锚定 Fréedericksz转变     

Compact Kähler Surfaces with Trivial Canonical Bundle

The classical conjectures of Weil on K3 surfaces – that the set of suchsurfaces is connected; that a version of the Torelli theorem holds; thateach such surface is Kähler; and that the period map issurjective – are reconsidered in the light of a generalisation of theNakai–Moishezon criterion, and short proofs of all the conjectures aregiven. Most of the proofs apply equally or with minor variation tocomplex 2-tori, the only other compact Kähler surfaces with trivialcanonical bundle.     

A theoretical analysis of the TiO2/Sn doped (1 1 0) surface properties

We have used the periodic quantum-mechanical method with density functional theory at the B3LYP level in order to study TiO₂/Sn doped (1 1 0) surfaces and have investigated the structural, electronic and energy band properties of these oxides. Our calculated relaxation directions for TiO₂ is the experimental one and is also in agreement with other theoretical results. We also observe for the doped systems relaxation of lattice positions of the atoms. Modification of Sn, O and Ti charges depend on the planes and positions of the substituted atoms. Doping can modify the Fermi levels, energy gaps as well as the localization and composition of both valence and conduction band main components. Doping can also modify the chemical, electronic and optical properties of these oxides surfaces increasing their suitability for use as gas sensors and optoelectronic devices.     

微型燃气轮机回热器换热表面的对比研究

采用高效紧凑式换热器是近年来微型燃气轮机发展取得成功的关键技术之一。本文在燃机参数给定情况下,通 过对三种换热表面进行热力计算和分析,结果表明,CC原表面在紧凑式换热器中具有较强的应用潜力。此外,还就温差 对压损的影响及燃气旁通量对回热度的影响进行了研究。     

Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

Ionic conductivity of epitactic MBE-grown BaF2 films

We studied parallel conductivities of pure BaF₂ films with thicknesses ranging from 35 to 300 nm, epitaxially grown on Al₂O₃(0 1 2) substrates by molecular beam epitaxy technique. The overall conductivities of the films are found to increase with decreasing thickness. The detailed investigation of the overall conductance as a function of the thickness permits the deconvolution of bulk and boundary effects, the latter being attributed to distinct space charge effects in the interface between BaF₂ film and Al₂O₃ substrate. The (extrinsic) Debye length (λ) is estimated to be about 8 nm at T=593 K, which corresponds to an impurity content of 10¹⁸/cm³ (singly ionized dopant assumed). This is consistent with the fact that we observed a constant boundary contribution for all investigated films (film thickness >4λ). It is also consistent with the Debye length observed in a previous report on CaF₂/BaF₂ heterolayers fabricated by the same technique, in which the low temperature enhancement was also attributed to space charges in BaF₂ [Nature 408 (2000) 946]. Only at low temperatures (below 370 °C), the conductance seems to be influenced by strain effect.     

Characteristics and structures of weak efficient surfaces of production possibility sets

This paper studies the characteristics and structure of the weak surface of the production possibility set. We apply techniques and methods of transferring a polyhedral cone from its intersection form to its sum form, identify an intersection representation of the production possibility set. We give the structure theorem of weak surface of the production possibility set, which includes three complementary slackness conditions. We define the input weak efficiency and output weak efficiency for different DEA models according to the representation of the intersection form. It investigates the characteristics of the weak surfaces, and proves the structure theorems of input weak DEA efficiency and output weak DEA efficiency. The structure theorems establish weighted combination of inputs and outputs that are weak DEA efficient. Numerical examples are provided for illustration.