Geometric analysis of anharmonic downward distortion following paths

A mathematical aspect of the anharmonic downward distortion following (ADDF) path is discussed. The ADDF method is utilized as an automated reaction path search method, which can explore transition state geometries on a potential energy surface from a potential minimum. We show that the maximum number of the ADD stationary paths intersecting the potential minimum is 2^{f + 1} ? 2 , where f denotes the degree of freedom of the system. We also show that the bifurcation of the ADD stationary path is essential to detect all the transition states connected from a given minimum. The ADDF computation is demonstrated for a H₂O molecule in which pitchfork bifurcation is observed.     

超浸润形状记忆海绵的制备及油-水分离性能

基于反式 1,4-聚异戊二烯(TPI)的形状记忆性能, 以聚氨酯海绵为基底, 包覆TPI制备出了一种具有疏水超亲油特性的三维多孔形状记忆海绵. 由于这种海绵具有良好的形状记忆特性, 可以通过反复按压/恢复过程, 实现对海绵孔径在微米尺寸(约875 μm)与纳米尺寸(约450 nm)间可逆调控. 利用材料特殊的浸润特征及其可控的孔尺寸, 进一步研究了其在油-水分离中的应用. 研究结果表明, 微米尺寸大孔径海绵有利于对不相溶油-水混合物进行快速高效分离, 而纳米尺寸小孔径海绵则有利于对乳液混合物进行分离, 实现了同一材料同时满足不相溶油-水混合物及乳液体系的分离要求.     

Click Chemistry in Ultra-high Vacuum – Tetrazine Coupling with Methyl Enol Ether Covalently Linked to Si(001)

The additive-free tetrazine/enol ether click reaction was performed in ultra-high vacuum (UHV) with an enol ether group covalently linked to a silicon surface: Dimethyl 1,2,4,5-tetrazine-3,6-dicarboxylate molecules were coupled to the enol ether group of a functionalized cyclooctyne which was adsorbed on the silicon (001) surface via the strained triple bond of cyclooctyne. The reaction was observed at a substrate temperature of 380 K by means of X-ray photoelectron spectroscopy (XPS). A moderate energy barrier was deduced for this click reaction in vacuum by means of density functional theory based calculations, in good agreement with the experimental results. This UHV-compatible click reaction thus opens a new, flexible route for synthesizing covalently bound organic architectures.     

Interaction of Hydrogen with Ceria: Hydroxylation,Reduction, and Hydride Formation on the Surface and in the Bulk

The study reports the first attempt to address the interplay between surface and bulk in hydride formation in ceria (CeO₂) by combining experiment, using surface sensitive and bulk sensitive spectroscopic techniques on the two sample systems, i.e., CeO₂(111) thin films and CeO₂ powders, and theoretical calculations of CeO₂(111) surfaces with oxygen vacancies (O_v) at the surface and in the bulk. We show that, on a stoichiometric CeO₂(111) surface, H₂ dissociates and forms surface hydroxyls (OH). On the pre-reduced CeO_2−x samples, both films and powders, hydroxyls and hydrides (Ce−H) are formed on the surface as well as in the bulk, accompanied by the Ce³⁺ ↔ Ce⁴⁺ redox reaction. As the O_v concentration increases, hydroxyl is destabilized and hydride becomes more stable. Surface hydroxyl is more stable than bulk hydroxyl, whereas bulk hydride is more stable than surface hydride. The surface hydride formation is the kinetically favorable process at relatively low temperatures, and the resulting surface hydride may diffuse into the bulk region and be stabilized therein. At higher temperatures, surface hydroxyls can react to produce water and create additional oxygen vacancies, increasing its concentration, which controls the H₂/CeO₂ interaction. The results demonstrate a large diversity of reaction pathways, which have to be taken into account for better understanding of reactivity of ceria-based catalysts in a hydrogen-rich atmosphere.     

石墨烯能带中的重叠矩阵效应:Tight-Binding方法在模拟中的研究

采用紧束缚方法计算了石墨烯的价带(π)和导带(π*),考虑了非正交基矢下重叠矩阵效应,重叠积分参量s越小,导带越靠近费米面,而价带越远离费米面.在重叠积分参量s≤0.1时,基本保持了原子在实际空间中重叠所引起的能带的改变,太大(s=0.4)则会导致物理上失效.计算了石墨烯的能态密度,在费米面ε=0处(对应Dirac点)的能态密度为零,并且在Dirac点附近呈线性变化.     

认知无线电网络中利用FEC和DE的多节点频谱感知算法

针对认知无线电网络(CRN)中空闲频谱感知困难的问题,本文提出了基于前向纠错和差分进化算法的多节点频谱感知算法。首先,利用基于差分进化算法的协同检测完成信号感知;然后,研究了信道噪声对频谱感知性能的影响;最后,分析了前向纠错技术在信道存在噪声时对频谱感知性能的影响。仿真实验将纠错和无纠错控制信道的不同信噪比作为依据,采用三种不同的检测方法评估了本文算法。仿真实验结果表明,在存在噪声的认知无线电网络中,本文算法提高了系统的性能和检测概率,且协同感知算法的性能随着节点数目的增加而提高,该算法适合应用于实时性要求较高的应用程序。     

微液滴在不同能量表面上润湿状态的分子动力学模拟

微小液滴在不同能量表面上的润湿状态对于准确预测非均相核化速率和揭示界面效应影响液滴增长微观机理具有重要意义. 通过分子动力学模拟, 研究了纳米级液滴在不同能量表面上的铺展过程和润湿形态. 结果表明, 固液界面自由能随固液作用强度增加而增加, 并呈现不同液滴铺展速率和润湿特性. 固液作用强度小于1.6的低能表面呈现疏水特征, 继续增强固液作用强度时表面变为亲水, 而固液作用强度大于3.5的高能表面上液体呈完全润湿特征. 受微尺度条件下非连续、非对称作用力影响, 微液滴气液界面存在明显波动, 呈现与宏观液滴不同的界面特征. 统计意义下, 微小液滴在不同能量表面上铺展后仍可以形成特定接触角, 该接触角随固液作用强度增加而线性减小, 模拟结果与经典润湿理论计算获得的结果呈现相似变化趋势. 模拟结果从分子尺度为核化理论中的毛细假设提供了理论支持, 揭示了液滴气液界面和接触角的波动现象, 为核化速率理论预测结果和实验测定结果之间的差异提供了定性解释.     

低As压退火对GaAs(001)表面形貌与重构的影响

在低As压条件下退火处理原子级平坦的GaAs(001) βup 2(2×4)重构表面. 利用扫描隧道显微镜对表面进行研究, 发现随着低As压退火时间的延长, 表面形貌与表面重构的演变同步进行. 表面形貌经历了从有序平坦转变为无序平坦, 然后逐渐恢复到有序平坦状态的过程. 表面重构则由βup 2(2×4)重构逐渐转变为(2×6)重构, 然后再转变为锯齿状的(2×6)重构, 并且表面形貌与表面重构的演变存在一定的相互关系.     

O(1D)和CD4反应的准经典轨线

在新的全域势能面上, 用准经典轨线方法细致地研究了O(¹D)+CD₄多通道化学反应的动力学．这个势能面是用交换不变多项式方法基于MRC+Q/aug-cc-pVTZ从头算点拟合得到的．通过计算得到了产物OD+CD₃、D+CD₂OD/CD₃O和D₂+DCOD/D₂CO的分支比、平动能分布以及角度分布,结果显示理论与实验吻合得较好, 从而说明了这个反应的同位素取代效应很小． 研究表明,O(¹D)+CD₄反应是经过陷入的抽取机理发生的： 最初主要通过D原子的抽取,并不是之前人们认为的直接C-D键的插入形成CD3OD中间物后再进而解离成各个产物通道．     

基于非同步替代光谱定标的地表下垫面影响分析

对760nm附近的氧气吸收带,选用植被、枯萎植被、人工地物、沙地和雪地五种典型地表类型,基于模拟数据进行非同步替代光谱定标方法的误差分析,比较不同地表类型得到的光谱定标准确度,为高光谱成像仪的非同步替代光谱定标提供定标图像选择策略.结果表明:运用两种光谱匹配方法——光谱角度匹配和欧氏距离法得到的定标误差基本一致;730~800nm的地表反射率曲线标准差在0.05nm以内时,定标误差集中在±0.5nm范围内;人工地物类型中个别地物如橄榄绿光泽涂料和植被大面积覆盖的图像数据不适合用于非同步替代光谱定标.