氢化物发生-银盐分光光度法测定中草药中砷的含量

采用氢化物发生-银盐分光光度法对中草药中溶解态砷的含量进行了测定。结果表明,砷标准曲线的回归方程为C=1．4474 A-0．0087,r=0．99,在0～0．4μg/mL的范围内,线性关系良好。对5种样品进行了回收实验,回收率为92．4％-102．6％,相对标准偏差为1．26％-2．43％。该法简单、快速、灵敏、准确。     

Flow injection hydride generation electrothermal atomic absorption spectrometric determination of toxicologically relevant arsenic in urine

Analytical procedure for the determination of toxicologically relevant arsenic (the sum of arsenite, arsenate, monomethylarsonate and dimethylarsinate) in urine by flow injection hydride generation and collection of generated inorganic and methylated hydrides on an integrated platform of a transverse-heated graphite atomizer for electrothermal atomic absorption spectrometric determination (ETAAS) is elaborated. Platforms are pre-treated with 2.7 μmol of zirconium and then with 0.10 μmol of iridium which serve both as an efficient hydride sequestration medium and permanent chemical modifier. Arsine, monomethylarsine and dimethylarsine are generated from diluted urine samples (10–25-fold) in the presence of 50 mmol L⁻¹ hydrochloric acid and 70 mmol L⁻¹ l-cysteine. Collection, pyrolysis and atomization temperatures are 450, 500, 2100 and 2150 °C, respectively. The characteristic mass, characteristic concentration and limit of detection (3σ) are 39 pg, 0.078 μg L⁻¹ and 0.038 μg L⁻¹ As, respectively. The limits of detection in urine are ca. 0.4 and 1 μg L⁻¹ with 10- and 25-fold dilutions. The sample throughput rate is 25 h⁻¹. Applications to several urine CRMs are given.     

微波辅助消解-原子荧光法测定玻璃中的镉砷铅

光学玻璃中的各种元素对玻璃的光学性能有不同的影响。如加入镉可以提高玻璃折射率;砷的引入能增加玻璃的透光度,含铅玻璃具有低成本、高折射性等优点。但是镉、砷、铅均为有毒元素,玻璃加工和处理过程以及毒废弃物的处理都可能引起水、土壤、大气的污染并给人体带来一定的危害     

Transient saturation absorption spectroscopy excited near the band gap at high excitation carrier density in GaAs

Transient saturation absorption spectroscopy in GaAs thin films was investigated using femtosecond pump and supercontinuum probe technique at excitation densities higher than 1×10^{19}cm^{-3}. The Coulomb enhancement factor of the electron－hole plasma results in a spectrum hole at the pump wavelength. Two distinct transmission peaks at two sides of the pump wavelength are observed, arising from the bleaching of transitions from the heavy- and light-hole bands to the conduction band. The dynamic process of the transient saturation absorption is fitted using a bi-exponential function. The fast decay process is dominated by the carrier-phonon scattering and the slow process may be attributed to the electron－hole recombination.     

Imaging theory of nonlinear second harmonic and third harmonic generations in confocal microscopy

ItisreportedrecentlythatnonlinearopticalphenomenonofSHGandTHGhasbeenobservedinmanybiologicaltissues[16].SHGandTHGhavebeenusedtoperformthethree-dimensionalimaginginlivingtissuesandhaveattractedmuchattentionrecently.TherearemanyadvantagesofusingSHGandTHGtoperformthethree-dimensionalimaginginlivingtissues,suchasnoninvasiveandnophotobleaching,inadditiontotheimagingpropertiesofmulti-photonfluorescenceimaging[7—9].Firstly,unlikeinthesingle-andmulti-photonfluorescenceprocesses,onlyvirtualstat…     

Actively mode-locked dual-wavelength fiber laser with close wavelength spacing using a fiber Bragg grating

A simple actively mode-locked fiber ring laser is proposed and successfully demonstrated to generate dual-wavelength picosecond pulses with close wavelength spacing using one Bragg grating in standard single-mode fiber. The proposed laser can be made to operate in stable dual-wavelength at room temperature, due to the birefringence characteristic of the FBG induced by transverse strain. Transverse strain loading on the FBG allows the wavelength spacing to be controlled. Generation of stable dual-wavelength pulses with a pulsewidth of 212–234 ps and a tunable wavelength separation from 0.2 to 0.44 nm at a pulse rate of 1.05 GHz was demonstrated.     

CdS/石墨烯复合材料的制备及其可见光催化分解水产氢性能

以氧化石墨烯和CdS为原料, 在乙醇水溶液中采用CdS光催化还原法制备了CdS/石墨烯复合光催化材料, 并用透射电子显微镜(TEM)、X射线衍射(XRD)、傅里叶变换红外(FTIR)光谱、X射线光电子能谱(XPS)和瞬态光电流等技术对复合材料的结构和光电性能进行了表征. 可见光照射下(λ≥420 nm), 研究了该复合材料光催化分解水产氢的性能. 结果表明, 可见光照射下CdS的光生电子可有效地还原氧化石墨烯, 得到CdS与石墨烯之间具有强相互作用力的CdS/石墨烯复合材料. 与CdS相比, 复合材料中石墨烯作为良好的电子受体和传递介质, 可明显加快CdS光生电子的迁移速率, 提高光生载流子的分离效率, 从而增强复合材料的光电性能和光催化分解水产氢的活性.     

Orientation Angle of Molecules at Hexadecane-Water Interface Studied with Total Internal Reflection Second Harmonic Generation

The orientation angle is an important parameter that reflects the structure of molecules at interfaces. In order to obtain this parameter, second order nonlinear spectroscopic techniques including second harmonic generation (SHG) and sum frequency generation-vibrational spectroscopy (SFG-VS) have been successfully applied through analysis of the nonlinear signal from various polarizations. In some SHG and SFG-VS experiments, total internal reflection (TIR) configuration has been adopted to get enhanced signals. However, the reports on the detailed procedure of the polarization analysis and the calculation of the orientation angle of interfacial molecules under TIR configuration are still very few. In this paper, we measured the orientation angles of two molecules at the hexadecane-water interface under TIR and Non-TIR experimental configurations. The results measured from polarization analysis in TIR configuration consist with those obtained from Non-TIR configuration. This work demonstrates the feasibility and accuracy of polarization analysis in the determination of the orientation angle of molecules at the interfaces under TIR-SHG configuration.     

Skeletal Ni Catalysts Prepared from Amorphous Ni–Zr Alloys: Enhanced Catalytic Performance for Hydrogen Generation from Ammonia Borane

Skeletal Ni catalysts were prepared from Ni–Zr alloys, which possess different chemical composition and atomic arrangements, by a combination of thermal treatment and treatment with aqueous HF. Hydrogen generation from ammonia borane over the skeletal Ni catalysts proceeded efficiently, whereas the amorphous Ni–Zr alloy was inactive. Skeletal Ni prepared from amorphous Ni₃₀Zr₇₀ alloy had a higher catalytic activity than that prepared from amorphous Ni₄₀Zr₆₀ and Ni₅₀Zr₅₀ alloys. The atomic arrangement of the Ni–Zr alloy also strongly affected the surface structure and catalytic activities. Thermal treatment of the amorphous Ni–Zr alloys at a temperature slightly lower than the crystallization temperature led to an increase of the number of surface‐exposed Ni atoms and an enhancement of the catalytic activities for hydrogen generation from ammonia borane. The skeletal Ni catalysts also showed excellent durability and recyclability.     

原子荧光光谱法测定镉锭中锡的含量

采用氢化物发生-原子荧光光谱法测定镉锭中锡含量,研究了基体镉对锡的干扰及消除方法,优化了氢化物的发生条件,建立了镉锭中锡含量的快速分析方法。实验证明,原子荧光光谱法对锡的检出限为0.08mg/kg,回收率为99.0%～104.0%,方法准确、可靠,用于日常样品分析,取得了很好的效果。