金属有机导体、半导体和超导体

本文综述了三类金属有机固体化合物的合成、结构与导电性能。这三类化合物是金属有机电荷转移盐,金属酞菁和会属卟啉络合物,以及金属有机夹层化合物。     

Ba-K-Bi-O和Ba-K-Pb-O氧化物的碘量滴定

本文提出了碘量法滴定Ba－K－Bi-O和Ba－K－Pb－O氧化物中Ba和Pb的名义价态，然后据此计算这些氧化物中K和Ba含量的方法。该法适用于正常条件下合成的具有ABO3型钙钛矿结构的Ba－K－Bi-O和Ba－K－Pb－O晶体。用本法的滴定结果表明，Tc为31K的Ba－K－Bi-O超导体的K含量为0．4，当K含量减少时，Tc随之下降。     

Correction procedure for the electron microprobe analysis of porous materials

A correction method is proposed for the quantitative determination of stoichiometric ratios in porous materials by electron microprobe analysis. Analysis of this kind of material is complicated by an imperfect surface that can only be improved to some extent. The correction is based on a linear dependence (different for each element) of the analyses on a sum of weight concentrations of oxides. With this correction it is possible to use analyses affected by the imperfection of the surface with much better confidence compared to common normalisation. An example is presented for a series of ceramic superconductors Bi_2.1(SrCa)_2.9Cu₂O₈₊.     

The decomposition of edta-gel precursors in the production of BSCCO superconductors

The decomposition of EDTA gel precursors for BSCCO superconductor manufacture has been studied using STA (TG/DTA) and dilatometry in conjunction with FTIR. The thermoanalytical data are discussed in relation to the sequence of phase formation necessary for the production of the 2223 BSCCO superconducting phase. The effects of substitution of Pb for Bi on the temperatures of formation of the superconducting phases is also discussed. STA has also been carried out under varying oxygen partial pressures to determine the effects of oxygen pressure on the formation and decomposition of the phases involved in the production of the 2223 compound.     

110K铋基超导相形成的组成条件

Bi-Sr-Ca-Cu-O超导材料中存在110K和80K2个超导相。其组成是Bi_2Sr_2Ca_2Cu_3O_y和Bi_2Sr_2CaCu_2O。但迄今为止,在按2223组成比合成的未掺杂Bi系超导材料中从未得到过纯的110K相,也未见过组成为2223,零电阻温度在100K以上材料的报道。为了探索形成110K相的最佳条件,本文以2223组成比为参考,合成了5个系列材料:Bi_xSr_2Ca_2Cu_3O_y,Bi_2Sr_xCa_2Cu_3O_y,Bi_2Sr_2Ca_xCu_3O_y,Bi_2Sr_2Ca_2Cu_xO_y,Bi_i Sr_uCa_yCu_wO_s。     

BiPbSbSrCaCuO的超导电性

据报,在BiPbSrCaCuO中加Sb形成BiPbSbSrCaCuO体系的T_c可达130K。但其组成、结构、性质等均未见详细报道。我们合成了一系列BiPbSbSrCaCuO,发现了一个具有2212相结构、但T_c却为～110K的超导相。 试样制备包括将Bi_2O_3,PbO,Sb_2O_3,SrCO_3,CaO和CuO(AR级)混匀、碾磨、于     

Systematic high-pressure synthesis of new filled skutterudites with heavy lanthanide, LnFe4P12 (Ln=heavy lanthanide, including Y)

New filled skutterudites with heavy lanthanide, LnFe₄P₁₂ (Ln=Tb, Dy, Ho, Er, Tm, Yb, Lu and Y) have systematically been prepared for the first time by the high-pressure technique. The relationship between lattice constants and atomic numbers of lanthanide (including Y) is established for LnFe₄P₁₂. Electrical and magnetic properties of several new filled skutterudites with heavy lanthanide have been studied at low temperatures; YFe₄P₁₂ shows a superconducting transition at around 7 K, and DyFe₄P₁₂ behaves as a ferromagnet below 10 K. Electrical and magnetic anomalies in DyFe₄P₁₂ and YFe₄P₁₂ are mainly discussed.     

Thermal and Microstructural Analysis of the Y–Ba–Cu–O/Ag Equilibrium Around the Critical Composition YBa2Cu3Ox/Ag 35 mass%

We studied the Y–Ba–Cu–O/Ag equilibrium diagram in oxygen atmosphere around the composition YBa₂Cu₃O_x/Ag35 mass%. We found a high thermal effect: the peritectic decomposition temperature of Y-123 phase is lowered from 1040 to 940°C. We demonstrate here that the nature of the phenomenon is not chemical. We explained it as the result of a mechanical segregation of Y-123 decomposition products from Y-123 phase, performed by silver. This revised version was published online in July 2006 with corrections to the Cover Date.     

Influence of vanadium doping on the behavior of YBa_2Cu_3O_7-y

YBa2Cu3-xVxO7-y(x=0, 0.1, 0.2, 0.3, 0.4, 0.5 and 0.6) superconductors have been prepared. X-ray diffraction shows that the system remains orthorhombic for all compositions studied, but for x > 0.4 V2O5 was detected as an impurity phase. Substitution of V5+ for Cu2+ occurs in the Cu(2) sites on the Cu(2)-O planes. The introduction of the high valence element, vanadium, produces the extra free-electrons. These electrons recombine with the positive carrier of the system. It makes depression of the mobility and the Hall number of YBa2Cu3-xVxO7-v and also results in a depression of TC.     

Optimization of the electrophoretic deposition of YBa2Cu3O7−x superconducting large area coatings

Large area coatings (>10cm²) of the high temperature superconductor YBa₂Cu₃O_7–x (x = 0.1 – 0.2) (YBCO) have been prepared by scale up an electrophoretic deposition technique using silver sheets and Si-wafers coated with Ag or Au as substrates. Several parameters, like the kind of the solvent, the applied voltage, the distance between the electrodes, the initial concentration of the suspension and the temperature during the electrophoresis were investigated in order to attain high deposition rates, as well as uniform YBCO coatings with the proper stoichiometry. To obtain a strongly adherent and dense coating a subsequent appropriate sintering and annealing procedure has been developed. The coatings obtained were characterized for their stoichiometry and superconducting properties by X-ray diffraction (XRD), Raman spectroscopy and magnetic measurements. The homogeneity and thickness of the films and the average grain size of the deposited particles have been investigated by optical and scanning electron microscopy (SEM).