60 MeV/u 18O离子同天然铀反应钡同位素截面的测定

通过60MeV/u18O离子照射天然铀靶产生Ba放射性同位素,使用BaCl2沉淀法从大量铀和其它反应产物混合物中分离出Ba.通过离线γ谱学方法测量了Ba样品的γ射线单谱,根据Ba同位素特征γ射线峰的强度及其它相关数据计算了Ba同位素的生成截面.发现在厚铀靶的情况下,缺中子Ba同位素仍有较高的截面. The radioactive Ba isotopes were produced by 60 MeV/u~(18)O ion bombardment of natural uranium. Ba was separated from U and the reaction product mixture by BaCl_(2) precipitation. The Ba fraction was measured by off-line γ-ray spectroscopy. The cross sections of the individual Ba isotope were calculation based on the intensities of the character γ-ray peaks of Ba isotopes and other relative information. It was found that the n-deficient Ba isotopes have higher cross sections using the thick uranium targets.     

试论湖北省洪涝的环流特征

通过对湖北省几个典型洪涝年的同期环流特征的分析，揭示了与湖北严重洪涝灾害密切联系的几种大气环流系统，并进行了分型．     

溶解-沉淀可逆的酶载体的合成及其应用

由丙烯酸、甲基丙烯酸甲酯和顺丁烯二酸酐共聚，合成了ｐＨ敏感的溶解－沉淀可逆的共聚物，并测试了共聚物溶解－沉淀相分离的临界ｐＨ值．以这种共聚物为载体，进行了木瓜蛋白酶的固定化．     

Synthesis,characterization, and influence of synthesis parameters on particle sizes of a new microgel family

Poly(p‐nitrophenylacrylate‐co‐methacrylamide) and poly(p‐Nitrophenylacrylate‐co‐N,N′‐isopropylacrylamide) reactive microgels were synthesized by precipitation polymerization. The process was followed qualitatively by infrared spectroscopy (ATR‐FTIR) and microgels composition was determined by nuclear magnetic resonance (¹H NMR). Scanning electron microscopy of obtained colloidal particles showed strictly spherical morphologies with a moderate polydispersity. The average hydrodynamic particle diameter and particle size distributions were measured by quasi‐elastic light scattering and the particle size distributions obtained ranged from 100 to 600 nm. Several synthetic parameters affect the particle size of these materials and thus, indirectly, their properties and future applications. In this article, we report the influence of different polymerization reaction conditions in the final microgel dimensions. For example, we observed that the different solvent‐comonomer affinity induced a significant change in swollen particle size of the copolymeric microgels. On the other hand, the crosslinking density limited the particle sizes, but an excess of crosslinker content in the reaction mixture resulted in the opposite effect. Finally, we also studied the influence of initiator content in the mean particle size. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3833–3842, 2007     

Mechanism of preparing monodisperse poly(acrylamide/methacrylic acid) microspheres in ethanol. I

The precipitation polymerization of acrylamide/methacrylic acid (AAm/MAA) in ethanol (EtOH) was thoroughly investigated from detecting the homogeneity of the initial solution prior to polymerizations to the final products of the polymerizations. Dynamic light scattering and scanning electron microscopy were employed for the investigations. The solutions of AAm and AAm/acrylic acid (AAm/AA) were homogeneous. However, the solutions of AAm/MAA, AAm/poly(MAA) (PMAA), and AAm/poly(AA) (PAA) were not homogeneous as they are usually considered to be: entities with size distributions of around 150, 40, and 17 nm, respectively, were detected at the polymerization temperature of 60 °C. Accordingly, analogous to the entities that are similar to the structure of micelles formed in the solutions of AAm/PMAA and AAm/PAA because of polymer–AAm interactions, it was suggested that the complexes of AAm/MAA stemming from the molecular interactions, particularly the (lypo‐) hydrophobic interaction, aggregated to form minimonomer droplets at 60 °C. The monodisperse microspheres were prepared only in the AAm/MAA‐EtOH systems, whereas the microspheres were not prepared in the homogeneous AAm‐EtOH systems despite the precipitation of PAAm. The results obtained from various polymerizations showed that the microspheres originated from the polymerization within the minimonomer droplets. A new mechanism was established that describes the processes for the formation of all products possibly generated in the AAm‐MAA‐EtOH polymerization system. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2823–2832, 2004     

AA 2037新型连铸铝合金热轧板退火的正电子湮没研究

应用正电子湮没等技术对AA 2037连铸铝合金热轧板不同温度退火下空位-溶质相互作用及沉淀相进行了研究， 研究表明：室温时效形成的主要是空位-铜复合体以及空位-镁-铜复合体；温度为200℃退火时由于过渡相的形成正电子平均寿命出现峰值，符合多普勒展宽谱的商谱中观察到锰信号的存在，表明形成了空位-镁-锰复合体或过渡相中可能存在锰；温度高于250℃时，随着过渡相变粗、溶解，锰信号消失，而铜信号增强，在350℃后铜信号达到饱和，温度为450℃左右时，稳定相形成. 关键词： 正电子湮没技术 空位-溶质复合体 沉淀 退火     

Sticking efficiency of nanoparticles in high-velocity collisions with various target materials

In order to find reliable collector surfaces for the Mesospheric Aerosol – Genesis, Interaction and Composition (MAGIC) sounding rocket experiment, intended to collect atmospheric nanoparticles, the sticking efficiency of nanoparticles was measured on several targets of different materials. The nanoparticles were generated by a molecular beam apparatus in Jena, Germany, by laser ablation (Al₂O₃ particles, diameter 5–50 nm) and by laser pyrolysis (carbon particles, diameter 10–20 nm). In a vacuum environment (>10⁻⁵ mbar) the particles condensed from the gas phase, formed a particle beam, and were accelerated to ∼ ∼1 km/s. The sticking efficiency on the target materials carbon, gold and grease was measured by a microbalance. Results demonstrate moderate to high sticking probabilities. Thus, the capture and retrieval of atmospheric nanoparticles was found to be quantitatively feasible.     

In‐Situ Determination of the Charging of Nanometer and Submicron Particles at High Temperatures

Thermal charging of submicron and nanometer particles has been studied for model aerosols of TiO₂ and SiO₂ as well as Al‐Si (aluminosilicate) at 1 000 °C with a new quasi in‐situ technique. The size dependence of the particle separation efficiency for electrostatic precipitation was determined. The charging state of the particles was obtained from evaluating the global Deutsch number for precipitation in an electric field applied to a laminar flow based on particle trajectory considerations.     

纳米氧化锌粉体的制备及发光性质的研究

采用沉淀法制备纳米ZnO粉体，探讨了晶粒尺寸与反应浓度和热处理温度的关系，并对所得到的纳米ZnO粉体的发光性质进行了研究，对不同温度热处理的样品的发光性质做了比较。ZnO的可见发光机制的解释一直未有定论。一部分作者认为绿光是由氧空位引起的；另一部分认为是锌空位造成的。本文的实验结果揭示了可见发光的内部过程，肯定了双声子参与的发光过程，支持了绿色是由锌空位造成的这一观点。此外，用230nm以下波长激发样品时，可见发光的行为明显不同于用325nm以上的波长去激发同一样品时的发光情形。实验表明高能激发，样品能发白光，因此，用ZnO做白光二极管是可能实现的。     

Effects of the reaction parameters on the properties of thermosensitive poly(N‐isopropylacrylamide) microspheres prepared by precipitation and dispersion polymerization

Poly(N‐isopropylacrylamide) (PNIPAAm)‐based microspheres were prepared by precipitation and dispersion polymerization. The effects of several reaction parameters, such as the type and concentration of the crosslinker (N,N′‐methylenebisacrylamide or ethylene dimethacrylate), medium polarity, concentration of the monomer and initiator, and polymerization temperature, on the properties were examined. The hydrogel microspheres were characterized in terms of their chemical structure, size and size distribution, and morphological and temperature‐induced swelling properties. A decrease in the particle size was observed with increasing polarity of the reaction medium or increasing concentration of poly(N‐vinylpyrrolidone) as a stabilizer in the dispersion polymerization. The higher the content was of the crosslinking agent, the lower the swelling ratio was. Too much crosslinker gave unstable dispersions. Although the solvency of the precipitation polymerization mixture controlled the PNIPAAm microsphere size in the range of 0.2–1 μm, a micrometer range was obtained in the Shellvis 50 and Kraton G 1650 stabilized dispersion polymerizations of N‐isopropylacrylamide in toluene/heptane. Typically, the particles had fairly narrow size distributions. Copolymerization with the functional glycidyl methacrylate monomer afforded microspheres with reactive oxirane groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 968–982, 2006