纳米锰基普鲁士白的制备及电化学储钠性能

采用高温共沉淀法制备锰基菱方相的普鲁士白正极材料,研究合成温度对产物微结构和电化学性能的影响。研究发现,随着合成温度的提高,产物的结晶度、颗粒尺寸和嵌钠容量明显提高。当合成温度为90℃时,产物在15 mA·g^-1下首次充放电容量分别达到142和139 mAh·g^-1。在30和50 mA·g^-1分别循环300和600次时,容量仍保持在111和89 mAh·g^-1。     

Three‐phase solvent bar liquid‐phase microextraction combined with high‐performance liquid chromatography to determine sarcosine in human urine

Sarcosine is a potential prostate cancer marker. In this study, we developed a method of three‐phase solvent bar liquid‐phase microextraction combined with high‐performance liquid chromatography to determine sarcosine after derivatization with 4‐dimethylarminoazobenzene‐4‐sulfonyl chloride from human urine. The effects of different extraction conditions on extraction efficiency were investigated and optimized. Under optimum experimental conditions, a calibration graph exhibited linearity over the range of 0.05–25 μmol/L with a correlation coefficient (r²) of 0.9990. The enrichment factor was 168, and the detection limit was 0.02 μmol/L. The method was successfully used to analyze sarcosine in human urine and non‐invasive detection, and good spiked recoveries ranging from 90.5 to 93.6% were obtained. The proposed method exhibited high sensitivity, high enrichment factor, good precision, and a simple setup. It may contribute to the early accurate diagnosis and the progression monitoring of prostatic carcinoma.     

What to Learn from a Comparative Genomic Sequence Analysis of <Emphasis Type="Italic">L</Emphasis>-Carnitine Dehydrogenase

Summary. In contrast to eukaryotic cells certain eubacterial strains have acquired the ability to utilize L-carnitine (R-(–)-3-hydroxy-4-(trimethylamino)butyrate) as sole source of energy, carbon and nitrogen. The first step of the L-carnitine degradation to glycine betaine is catalysed by L-carnitine dehydrogenase (L-CDH, EC 1.1.1.108) and results in the formation of the dehydrocarnitine. During the oxidation of L-carnitine a simultaneous conversion of the cofactor NAD⁺ to NADH takes place. This catabolic reaction has always been of keen interest, because it can be exploited for spectroscopic L-carnitine determination in biological fluids – a quantification method, which is developed in our lab – as well as L-carnitine production.Based on a cloned L-CDH sequence an expedition through the currently available prokaryotic genomic sequence space began to mine relevant information about bacterial L-carnitine metabolism hidden in the enormous amount of data stored in public sequence databases. Thus by means of homology-based and context-based protein function prediction is revealed that L-CDH exists in certain eubacterial genomes either as a protein of approximately 35 kDa or as a homologous fusion protein of approximately 54 kDa with an additional putative domain, which is predicted to possess a thioesterase activity. These two variants of the enzyme are found on one hand in the genome sequence of bacterial species, which were previously reported to decompose L-carnitine, and on the other hand in gram-positive bacteria, which were not known to express L-CDH. Furthermore we could not only discover that L-CDH is located in a conserved genetic entity, which genes are very likely involved in this L-carnitine catabolic pathway, but also pinpoint the exact genomic sequence position of several other enzymes, which play an essential role in the bacterial metabolism of L-carnitine precursors.     

中空纤维三相液相微萃取-高效液相色谱法测定水中的4种酚类化合物

建立了中空纤维液-液-液三相微萃取-高效液相色谱法测定水中4种酚类化合物的方法.实验系统地优化了影响萃取效率的因素(包括有机溶剂种类、接收相浓度、分散相pH值、加盐量、转速及萃取时间).得到的最佳萃取条件为:萃取剂为正辛醇,接收相NaOH溶液的浓度为0.09 mol/L,分散相的pH为4,萃取时间为40 min,搅拌速...     

悬浮固化-分散液液微萃取-液相色谱-串联质谱测定纺织废水中磷系阻燃剂

建立了悬浮固化-分散液液微萃取结合液相色谱-串联质谱测定纺织废水中5种痕量磷系阻燃剂的方法。通过对萃取过程中萃取剂、分散剂的种类与体积、盐浓度、溶液pH值等对萃取效率的影响因素优化,确立了最佳萃取条件。采用了密度小于水的十一烷醇(400μL)为萃取剂,甲醇(300μL)为分散剂,控制溶液pH值在6～9之间,NaCl添加量为2 g,萃取时间为涡旋2 min。在优化的萃取条件下,该方法在2～100μg/L均有良好的线性关系,相关系数大于0.995,除二(2,3-二溴丙基)磷酸酯(BIS)的检出限为5μg/L外,三(2-氯乙基)磷酸酯(TCEP)、三(1,3-二氯-异丙基)磷酸酯(TDCP)、三(1-氮丙啶基)氧化膦(TEPA)和三(2,3-二溴丙基)磷酸酯(TRIS)的检出限均为2μg/L。后整理、染色和印花等实际废水样品加标试验表明,方法的平均回收率为71.6%～114.5%, RSD为2.7%～11.2%(n=6)。对11个样品进行检测,其中3个废水样品检出TCEP与TDCP化合物,含量为2.6～3.4μg/L。本方法简单,快速,灵敏度好且环保绿色,能够对纺织废水中的5种痕量磷系阻燃剂...     

柱前衍生化-高效液相色谱法分析木糖结晶母液的单糖组成

采用1-苯基-甲基-吡唑啉酮(PMP)柱前衍生化-反相高效液相色谱(HPLC)法建立了8种常见单糖的分离模式,并用于木糖结晶母液单糖组成的定量分析.结果表明:木糖结晶母液至少由甘露糖、鼠李糖、纤维二糖、葡萄糖、半乳糖、木糖、阿拉伯糖及岩藻糖8种单糖组成,其中以葡萄糖、半乳糖、木糖和阿拉伯糖为主.以峰高定量,8种单糖的浓...     

Theoretical analysis of the onset of liquid entrainment for slots of finite width

The onset of liquid entrainment during discharge from large reservoirs containing a stratified mixture of two immiscible fluids through a side slot of a finite width is considered theoretically. A previously reported analysis in which the slot was approximated as a two-dimensional line sink has been extended to account for the finite width of the slot. The model resulting from the present analysis is expressed in terms of two simple algebraic equations suitable for hand calculations. According to the present results, the ratio of the critical height to the slot width is dependent only on the Froude number. Numerical results show that the present model approaches the correct physical limits at low Froude numbers and it converges to the predictions of the previously reported simple model at high Froude numbers.     

A novel Mo-based oxide β-SnMoO_4 as anode for lithium ion battery

Recently,the development of new electrode materials for lithium-ion batteries(LIBs)has received intensive attention.As an important family of inorganic materials,mixed Mo-based transition metal oxides system is focused as anode materials.In the present work,a simple route has been adopted for the synthesis of layered-flake-likeβ-SnMo04 Nano-assemblies,which have been explored as potential anode materials for the first time in lithium-ion battery(LIB).Overall,the current reports on metal molybdate as anode materials are still rarely.As the anode material for LIBs,it was observed that the fabricated anode is capable of delivering a steady state capacity of almost 400 mAh/g up to 300 cycles under the influence of200 mA/g current density.Further,the anode material is suitable for use as a rated capacity anode because of its high current density tolerance.The present study can be further extended for the generation of a wide variety of other novel materials for multidisciplinary energy related applications.     

氧化石墨烯调控钼酸铋在可见光下选择性光催化降解环境水中的抗生素

以氧化石墨烯(GO)作为增强光催化剂活性的调节剂, 采用一步水热法制备钼酸铋/氧化石墨烯(Bi₂MoO₆/GO)异质结光催化剂, 其可见光响应拓展至570 nm, 带隙能降至2.56 eV. 当m_Bi2MoO6/m_GO=100∶1时, Bi₂MoO₆/GO(100∶1)光催化剂在可见光的辐射下, 对水溶液中四环素和喹诺酮类抗生素选择性的高效催化降解去除能力为Bi₂MoO₆的2.1倍. Bi₂MoO₆/GO(100∶1)光催化剂活性的提高依赖于范德华力作用下的二维Bi₂MoO₆纳米片-二维GO纳米片界面的紧密接触. 有效的界面接触改善了光生电子的转移和光生载流子的分离. 自由基清除实验结果表明, ?OH起主要作用. 结合高效液相色谱-质谱(HPLC-MS)法对降解产物的分析, 提出了不同光催化剂催化降解恩诺沙星具有相似的降解途径和降解产物.     

固相萃取/高效液相色谱-串联质谱法测定黄瓜及土壤中的春雷霉素残留

建立了测定黄瓜和土壤中春雷霉素残留的固相萃取/高效液相色谱-串联质谱(SPE/HPLC-MS/MS)方法。黄瓜和土壤样品分别经1%甲酸的甲醇、0.5%甲酸水提取后,采用MCX固相萃取柱净化,以Waters Xbridge BEH Amide色谱柱分离,0.2%甲酸水-乙腈溶液进行梯度洗脱,电喷雾正离子(ESI+)模式电离,多反应监测(MRM)模式检测,基质匹配标准曲线外标法定量。该方法灵敏、准确、简单快速、重复性好,在2~250μg/L浓度范围内,不同基质中春雷霉素的线性相关系数均大于0.999,检出限为0.002 mg/kg,定量下限为0.008 mg/kg;在0.008、0.040、0.200、0.400 mg/kg 4个加标水平下,春雷霉素在黄瓜和土壤样品中的平均回收率为77.5%~97.0%,相对标准偏差为2.6%~10.7%,能够满足黄瓜及土壤中春雷霉素残留的检测需求。应用该法对田间样品进行检测,结果表明,春雷霉素在黄瓜中的残留量不超过0.053 mg/kg,小于我国规定的黄瓜中最大残留限量(0.2 mg/kg);土壤中春雷霉素的残留量不超过0.013 mg/kg。