Supersonic transverse rarefied gas flow past a strip

The supersonic flow of a monatomic gas consisting of hard spherical particles past a flat strip normal to the flow is investigated using the direct simulation Monte-Carlo (DSMC) method. The calculations are performed over the Knudsen and Mach number ranges 0.015–5 and 1.8–15, respectively. The structure of the compressed layer and the aerodynamic characteristics are systematically studied for the Mach number 5 and various Knudsen numbers. The dependences of the compressed-layer thickness in molecular free paths are found. The nonequilibrium processes in the neighborhood of the strip are described on the basis of the data on the temperature anisotropy with respect to three coordinates.__________Translated from Izvestiya Rossiiskoi Academii Nauk, Mekhanika Zhidkosti i Gaza, No. 1, 2005, pp. 159–167. Original Russian Text Copyright © 2005 by Maltsev and Rebrov.     

Griffith crack moving in a piezoelectric strip

Summary  The dynamic problem of an impermeable crack of constant length 2a propagating along a piezoelectric ceramic strip is considered under the action of uniform anti-plane shear stress and uniform electric field. The integral transform technique is employed to reduce the mixed-boundary-value problem to a singular integral equation. For the case of a crack moving in the mid-plane, explicit analytic expressions for the electroelastic field and the field intensity factors are obtained, while for an eccentric crack moving along a piezoelectric strip, numerical results are determined via the Lobatto–Chebyshev collocation method for solving a resulting singular integral equation. The results reveal that the electric-displacement intensity factor is independent of the crack velocity, while other field intensity factors depend on the crack velocity when referred to the moving coordinate system. If the crack velocity vanishes, the present results reduce to those for a stationary crack in a piezoelectric strip. In contrast to the results for a stationary crack, applied stress gives rise to a singular electric field and applied electric field results in a singular stress for a moving crack in a piezoelectric strip. Received 14 August 2001; accepted for publication 24 September 2002 The author is indebted to the AAM Reviewers for their helpful suggestions for improving this paper. The work was supported by the National Natural Science Foundation of China under Grant 70272043.     

Thermal analysis of the roll in the strip casting process

Coiled strip can be directly produced through the twin-roll strip casting process from the melt by incorporating casting and hot rolling together into a single step. In this unique process, the strip formation from the molten metal critically relies upon the casting rolls. Thus, the design of the rolls is extremely essential. The coupled heat transfer and deformation analysis of the casting roll is carried out in a two-dimensional numerical model, using a finite element program (MARC) to examine the thermal stress and displacement. The effects of several factors such as the nickel overlay thickness on the roll surface, the casting speed, and the roll diameter on thermal characteristics are investigated.     

Periodic vibro-impacts and their stability of a dual component system

The coexisting periodic impacting motions and their multiplicity of a kind of dual component systems under harmonic excitation are analytically derived. The stability condition of a periodic impacting motion is given by analyzing the propagation of small, arbitrary perturbation from that motion. In numerical simulations, the periodic impacting motions are classified according to the system states before and after an impact. The numerical results show that there exist many types of vibro-impacts and the bifurcation of periodic vibro-impacts is not smooth. Project supported in part by National Natural Science Foundation of China under the grant 59572024 and in part by Trans-century Training Program Foundation for the Talents by the State Education Commission of China     

A visual strip sensor for determination of iron

A visual strip has been developed for sensing iron in different aqueous samples like natural water and fruit juices. The sensor has been synthesized by UV-radiation induced graft polymerization of acrylamide monomer in microporous poly(propylene) base. For physical immobilization of iron selective reagent, the in situ polymerization of acrylamide has been carried out in the presence of 1,10-phenanthroline. The loaded strip on interaction with Fe(II) in aqueous solution turned into orange red color and the intensity of the color was found to be directly proportional to the amount of Fe(II) in the aqueous sample. The minimal sensor response with naked eye was found for 50 ng mL⁻¹ of Fe in 15 min of interaction. However, as low as 20 ng mL⁻¹ Fe could be quantified using a spectrophotometer. The detection limit calculated using the 3s/S criteria, where ‘s’ is the standard deviation of the absorbance of blank reagent loaded strip and ‘S’ is the slope of the linear calibration plot, was 1.0 ng mL⁻¹. The strip was applied to measure Fe in a variety of samples such as ground water and fruit juices.     

The multiplicity of abelian covers of splice quotient singularities

From a resolution graph with certain conditions, Neumann and Wahl constructed an equisingular family of surface singularities called splice quotients. For this class some fundamental analytic invariants have been computed from their resolution graph. In this paper we give a method to compute the multiplicity of an abelian covering of a splice quotient from its resolution graph and the Galois group.     

Bifurcation diagrams of a p-Laplacian Dirichlet problem with Allee effect and an application to a diffusive logistic equation with predation

We study bifurcation diagrams of positive solutions for the p-Laplacian Dirichlet problem

     

Anti-plane analysis of semi-infinite crack in piezoelectric strip

Using the complex variable function method and the technique of the conformal mapping, the fracture problem of a semi-infinite crack in a piezoelectric strip is studied under the anti-plane shear stress and the in-plane electric load. The analytic solutions of the field intensity factors and the mechanical strain energy release rate are presented under the assumption that the surface of the crack is electrically impermeable. When the height of the strip tends to infinity, the analytic solutions of an infinitely large piezoelectric solid with a semi-infinite crack are obtained. Moreover, the present results can be reduced to the well-known solutions for a purely elastic material in the absence of the electric loading. In addition, numerical examples are given to show the influences of the loaded crack length, the height of the strip, and the applied mechanical/electric loads on the mechanical strain energy release rate.     

Existence and multiplicity of positive solutions for an elastic beam equation

This paper investigates the boundary value problem for elastic beam equation of the form

M/M/1算子的其它特征值

证明对一切θ∈（0,1）,θ（2（λμ）~（1/2）-λ-μ）都是偏微分方程形式的M/M/1排队模型主算子的几何重数为1的特征值.