Modelling and experimental characterisation of the Lüders strain in complex loaded ferritic steel compact tension specimens

The use of 3D digital image correlation (DIC) has been used to capture the Lüders strains in a low carbon ferritic steel. Results were used to calibrate and compare with finite element (FE) results based on a constitutive plasticity model, capable of yield drop behaviour and therefore Lüders strains, by Zhang et al. (2001). Tensile tests were carried out at several strain rates to characterise the material behaviour. The results of these tests were used to fit parameters in the constitutive plasticity model. The FE model was then tested on a complex loading situation of in-plane compression of a compact tension (CT) specimen. The FE model predicts the shape and formation of the Lüders bands well. This FE model, using Zhang’s constitutive plasticity model, was used to predict the residual stress profile to compare with standard elastic–plastic isotropic hardening models with no yield point. The yield point reduced both the predicted peak tensile stress, at the notch root, and the amount of plastic strain. In regions where the plastic strain was of a similar size to the Lüders strain the stress profiles were perturbed from flat profiles predicted by the standard elastic–plastic hardening models.     

大阻尼高灵敏度复合地震检波器的研究

研制了一种新型高灵敏度、大阻尼、低输出阻抗复合型地震检波器,并通过利用微电子技术增大检波器阻尼比系数的方法,实现检波器主频区频率特性改造,使速度检波器在有效使用频带内达到加速度特性.现场试验结果表明,该检波器单显记录信噪比较高,视频率高,能量强,具有拓宽地震子波频带和提高主频的能力,适合于高分辨率地震勘探使用.     

超晶格材料光电性能及其相关力学问题研究进展

超晶格材料是由两种或两种以上性质不同的薄膜交替生长而形成的人工周期性结构材料.超晶格材料中具有连续介质力学``小尺度效应'和量子力学``大尺寸量子效应'并存的现象.阐述了超晶格材料周期结构特征和制备技术,介绍了超晶格材料量子化能带结构及其奇异的光电特性.探讨了超晶格材料微观结构及其变形机理,归纳了超晶格材料量子化电子结构的几种常用计算方法,如紧束缚方法、赝势方法和k$ \cdot $p微扰方法等.重点介绍了外力场和应变对超晶格材料量子化电子结构及其光电性质影响,包括作者所在研究小组近期在端部摩擦、点载荷、有限界面和各向异性等对超晶格微观变形及其量子化电子结构影响的跨尺度一体化研究方面的最新工作进展.      

矩形槽内水体大幅晃动分析中截断误差影响范围判断方法探讨

液体大幅晃动是目前CFD研究中一个热点。在CFD中,偏微分方程离散所产生的截断误差是主要的误差来源,且与网格尺度密切相关。本文首先从理论上介绍了截断误差的产生过程,由此过程可知截断误差与物理粘性的作用具有类似性。以此概念为基础,根据液体晃动动力响应的特点提出了在液体大幅晃动分析中,如何通过对物理粘性系数的参数敏感性分析,判断截断误差的作用范围从而判断计算精度是否满足要求的方法,最后与现有试验资料进行对比校核,验证了该方法的实用性。     

Creep deformation measurement using quartz optical fiber

This paper describes an optical system for high temperature creep strain measurement using quartz optical fiber, super long working distance microscope and digital image processing techniques. In this system one end of the quartz optical fibers is arrayed in a small area on the specimen surface and the other end is illuminated by a laser beam. The fiber ends on the specimen surface form the spot array. The small optical spots on the specimen are tracked by a CCD camera and the images are processed by digital image processing software. The diameter of each quartz fiber is 100 μm and the fibers can be arrayed in a small area. The local strains are determined by measuring the variety of relative distance between two spots. Experimental results of local creep strain on the welding joints of 15CrMo and HK40 at 850°C are obtained.     

部分剪力连接钢—砼组合梁的滑移及曲率分析

对受均布荷载作用的简支部分剪力连接钢－砼组合梁的滑移应变和滑移的分布规律进行了理论分析,得出部分剪力连接钢－砼组合梁的剪力连接程度系数与滑移应变和滑移的关系。分析了考虑滑移效应的梁的曲率及其与剪力连接程度系数之间的关系。结果与结构在弹性阶段的实验相当吻合,对组合梁挠度的精确计算有指导意义。     

极低风速下热线测量的方向特性

在风速为6～30m/s的范围内,许多研究表明可近似认为热线探针的偏角因子K1和倾角因子K2不随风速变化,倾角θ对K1及偏角ψ对K2也近似认为没有影响,一般采用k1≈0.2,K2≈1.02.然而在极低风速下,特别是1m/s以下,由于热线的传热机理发生变化,所以K1和K2也出现了显著的变化.本文对单丝探针和双丝探针方向特性进行了探讨性的研究,实验表明,风速小于3m/s时,K1和K2随速度发生变化,且θ对K1以及ψ对K2都有影响.当取ψ和θ为90°时,K1和K2在整个角度范围内计算速度的误差较小.     

Monte Carlo simulation of radon SSNT detectors

A Monte Carlo based software for the computation of the sensitivity of etched radon track detectors was developed. It can be applied to the measurement of radon and radon daughters in free air or inside of a measurement chamber. LR 115 and CR-39 detectors, with or without an attenuator, are specifically addressed. Various etching conditions and observation criteria for counting the track density may be specified. The latent track formation and the etching process are realistically modelled. The dependence of the etch-rate ratio on the energy is taken into account. The plate-out phenomenon is included in the model. An inhomogeneous source distribution in the detector cup can be considered.     

大分子单体聚N-乙烯甲酰胺与苯乙烯共聚合成热敏性功能高分子微球

用自由基聚合法合成了大分子单体聚N 乙烯甲酰胺和功能高分子微球 .用GPC、分光光度仪和扫描电子显微镜等对合成的聚合物进行了表征 .研究结果表明 ,大分子单体聚N 乙烯甲酰胺和功能高分子微球具有明显的热敏性特性 ,且合成的功能高分子微球具有单分散性 ,粒径在 1～ 5 μm之间