Quasi-classical Trajectory Study of F-I-H20→HF-I-OH Reaction： Influence of Barrier Height,Reactant Rotational Excitation,and Isotopic Substitution

The reaction dynamics of the F＋H20/D20→HF/DF＋OH/OD are investigated on an accurate potential energy surface （PES） using a quasi-classical trajectory method. For both isotopomers, the hydrogen/deuterium abstraction reaction is dominated by a direct rebound mechanism over a very low ＂reactant-like＂ barrier, which leads to a vibrationally hot HF/DF product with an internally cold OH/OD companion. It is shown that the lowered reaction barrier on this PES, as suggested by high-level ab initio calculations, leads to a much better agreement with the experimental reaction cross section, but has little impact on the product state distributions and mode selectivity. Our results further indicate that rotational excitation of the H20 reactant leads to significant enhancement of the reactivity, suggesting a strong coupling with the reaction coordinate.     

Diketopyrrolopyrrole?Thiophene‐Based Acceptor–Donor–Acceptor Conjugated Materials for High‐Performance Field‐Effect Transistors

We report the synthesis, morphology, and field‐effect‐transistor (FET) characteristics of new acceptor–donor–acceptor conjugated materials that consist of diketopyrrolopyrrole (DPP) acceptor groups and one of four different thiophene moieties, that is, dithiophene (2T), thieno[3,2‐b]‐thiophene (TT), dithieno[3,2‐b:2′,3′‐d]‐thiophene (DTT), and 5,5′′′‐di‐(2‐ethylhexyl)‐[2,3′;5′,2′′;4′′,2′′′]quaterthiophene (4T). The optical band gaps of the as‐prepared materials are smaller than 1.7 eV, which is attributed to the strong intramolecular charge transfer and the backbone coplanarity of the thiophene moieties. The order of both crystallinity and FET mobility (×10^?2–×10^?4 cm² V^?1 s^?1) is TT2DPP > 4T2DPP > 2T2DPP >DTT2DP, which differ in the structure of the π‐conjugated cores and core symmetry. Well‐ordered intermolecular chain packing was confirmed by the GIXD and AFM results. In particular, the FET hole mobility of TT2DPP was further improved to 0.1 cm² V^?1 s^?1, which was attributed to the well‐interconnected structure through solution‐shearing. These experimental results suggest the potential applications of the new DPP? thiophene? DPP conjugated materials for organic electronic devices.     

Promotion effect of adsorbed water/OH on the catalytic performance of Ag/activated carbon catalysts for CO preferential oxidation in excess H2

Activated carbon (AC) supported silver catalysts were prepared by incipient wetness impregnation method and their catalytic performance for CO preferential oxidation (PROX) in excess H₂ was evaluated. Ag/AC catalysts, after reduction in H₂ at low temperatures (≤200 °C) following heat treatment in He at 200 °C (He200H200), exhibited the best catalytic properties. Temperature-programmed desorption (TPD), X-ray diffraction (XRD) and temperature-programmed reduction (TPR) results indicated that silver oxides were produced during heat treatment in He at 200 °C which were reduced to metal silver nanoparticles in H₂ at low temperatures (≤200 °C), simultaneously generating the adsorbed water/OH. CO conversion was enhanced 40% after water treatment following heat treatment in He at 600 °C. These results imply that the metal silver nanoparticles are the active species and the adsorbed water/OH has noticeable promotion effects on CO oxidation. However, the promotion effect is still limited compared to gold catalysts under the similar conditions, which may be the reason of low selectivity to CO oxidation in PROX over silver catalysts. The reported Ag/AC-S-He catalyst after He200H₂00 treatment displayed similar PROX of CO reaction properties to Ag/SiO₂. This means that Ag/AC catalyst is also an efficient low-temperature CO oxidation catalyst.     

Coffee-ring effects in laser desorption/ionization mass spectrometry

This report focuses on the heterogeneous distribution of small molecules (e.g. metabolites) within dry deposits of suspensions and solutions of inorganic and organic compounds with implications for chemical analysis of small molecules by laser desorption/ionization (LDI) mass spectrometry (MS). Taking advantage of the imaging capabilities of a modern mass spectrometer, we have investigated the occurrence of “coffee rings” in matrix-assisted laser desorption/ionization (MALDI) and surface-assisted laser desorption/ionization (SALDI) sample spots. It is seen that the “coffee-ring effect” in MALDI/SALDI samples can be both beneficial and disadvantageous. For example, formation of the coffee rings gives rise to heterogeneous distribution of analytes and matrices, thus compromising analytical performance and reproducibility of the mass spectrometric analysis. On the other hand, the coffee-ring effect can also be advantageous because it enables partial separation of analytes from some of the interfering molecules present in the sample. We report a “hidden coffee-ring effect” where under certain conditions the sample/matrix deposit appears relatively homogeneous when inspected by optical microscopy. Even in such cases, hidden coffee rings can still be found by implementing the MALDI-MS imaging technique. We have also found that to some extent, the coffee-ring effect can be suppressed during SALDI sample preparation.     

Development of a Sensitive Method for the Determination of 4‐(Methylnitrosamino)‐1‐(3‐pyridyl)‐1‐butanol in Human Urine Using Solid‐phase Extraction Combined with Ultrasound‐assisted Dispersive Liquid–liquid Microextraction and LC‐MS/MS Detection

An efficient and sensitive analytical method based on molecularly imprinted solid‐phase extraction (MISPE) and reverse‐phase ultrasound‐assisted dispersive liquid–liquid microextraction (USA‐DLLME) coupled with LC–MS/MS detection was developed and validated for the analysis of urinary 4‐(methylnitrosamino)‐1‐(3‐pyridyl)‐1‐butanol (NNAL), a tobacco‐specific nitrosamine metabolite. The extraction performances of NNAL on three different solid‐phase extraction (SPE) sorbents including the hydrophilic‐lipophilic balanced sorbent HLB, the mixed mode cationic MCX sorbent and the molecularly imprinted polymers (MIP) sorbent were evaluated. Experimental results showed that the analyte was well retained with the highest extraction recovery and the optimum purification effect on MIP. Under the optimized conditions of MIP and USA‐DLLME, an enrichment factor of 23 was obtained. Good linearity relationship was obtained in the range of 5‐1200 pg/mL with a correlation coefficient of 0.9953. The limit of detection (LOD) was 0.35 pg/mL. The recoveries at three spiked levels ranged between 88.5% and 93.7%. Intra‐ and inter‐day relative standard deviations varied from 3.6% to 7.4% and from 5.4% to 9.7%, respectively. The developed method combing the advantages of MISPE and DLLME significantly improves the purification and enrichment of the analyte and can be used as an effective approach for the determination of ultra‐trace NNAL in complex biological matrices.     

Influence of cellulose nanofibers on the curing behavior of epoxy/amine systems

Epoxy composites were prepared using diglycidyl ether bisphenol F and water-dilutable diglycidyl ether bisphenol A with curing agents, polyoxypropylenediamine and diethylmethylbenzenediamine, in water or dimethylformamide as a solvent. The influence of cellulose nanofibers and solvents on curing kinetics of epoxy composites was investigated. Curing kinetic parameters were calculated using the model-fitting methods and the isoconversional method. Among these, the Sestak–Berggren equation best fit the experimental data. Results indicated that dimethylformamide decreased the reaction rate, whereas water revealed the opposite pattern. Cellulose nanofibers catalyzed the reaction between bisphenol F resins and the aromatic curing agent.     

Enantioselective synthesis of spiro[4H-pyran-3,3′-oxindole] derivatives catalyzed by cinchona alkaloid thioureas: Significant water effects on the enantioselectivity

An efficient stereoselective three-component reaction for the synthesis of functionalized spiro[4H-pyran-3,3′-oxindole] derivatives was realized through an organocatalyzed domino Knoevenagel/Michael/cyclization reaction using a cinchonidine-derived thiourea as the catalyst. Using water as the additive was found to improve the product ee values significantly. Under the optimized conditions, the reactions between isatins, malononitrile, and 1,3-dicarbonyl compounds yield the desired spirooxindole products in good yields (71–92%) and moderate to high ee values (up to 87% ee).     

New N-Substituted (E)-4-Arylidene Isoquinoline-1,3-dione Derivatives: NMR Spectroscopic Investigation and Antibacterial Activity

Abstract

New N-substituted 4-arylidene-isoquinoline-1,3-dione derivatives were obtained as one geometrical isomer by aldol condensation of the appropriate aldehyde and the corresponding N-substituted homophthalimides. The structural elucidation of compounds 3a–h was established by infrared and NMR spectroscopy including ¹ Dimmock , J. R. ; Wong , M. L. C. Bioactivities and potential uses in drug design of acyclic α,β-unsaturated ketones . Can. J. Pharm. Sci. 1976 , 11 , 35 – 53 .[Web of Science ®] , [Google Scholar]H, ¹³ Perjési , P. ; Szabó , D. ; Batta , G. ; Földesi , A. The stereochemistry of reaction of 2-benzylidenecyclohexanone with dithiocarbamic acid . Tetrahedron Lett. 1987 , 28 , 571 . [Google Scholar]C, CH CORR, and distortionless enhancement by polarization transfer measurements. Compounds 3d–h were evaluated for their antibacterial activity against some strains of bacteria using the disc diffusion method and microdilution tests.     

Simple One-Pot Synthesis of New Derivatives of the Macrocyclic Aminal 1,3,7,9,13,15,19,21-Octaazapentacyclo-[19.3.1.13,7.19,13.115,19]octacosane (OAPO)

A series of 2,2′-(dihydropyrimidine-1,3(2H,4H)-diyldimethanediyl)bis(substituted-phenols) was synthesized using a Mannich-type reaction between the macrocyclic aminal 1,3,7,9,13,15,19,21-octaazapentacyclo[19.3.1.1^3,7.1^9,13.1^15,19]octacosane (OAPO) (1) and substituted phenols in basic media. These previously unreported compounds were separated from the reaction mixture by column chromatography in highly pure form with 25–75% yields. The most stable conformer was predicted using AM1-type semiempirical quantum chemical calculations.     

Theoretical study of electronic structure of rhodium mononitride and interpretation of experimental spectra

Potential energy curves of 22 electronic states of RhN have been calculated by the complete active space second‐order perturbation theory method. The X¹Σ₀⁺ is assigned as the ground state, and the first excited state a³Π₀+ is 978 cm^?1 higher. The ¹Δ(I) and B¹Σ⁺ states are located at 9521 and 13,046 cm^?1 above the ground state, respectively. The B¹Σ⁺ state should be the excited state located 12,300 cm^?1 above the ground state in the experimental study. Moreover, two excited states, C¹Π and b³Σ⁺, are found 14,963 and 15,082 cm^?1 above the X¹Σ⁺ state, respectively. The transition C¹Π₁–X¹Σ₀⁺ may contribute to the experimentally observed bands headed at 15,071 cm^?1. There are two excited states, D¹Δ and E¹Σ⁺, situate at 20,715 and 23,145 cm^?1 above the X¹Σ⁺ state. The visible bands near 20,000 cm^?1 could be generated by the electronic transitions D¹Δ₂–a³Π₁ and E¹Σ⁺₀–X¹Σ⁺₀ because of the spin–orbit coupling effect. © 2013 Wiley Periodicals, Inc.