Dynamic Surface Elasticity of Polyelectrolyte/Surfactant Adsorption Films at the Air/Water Interface: Carboxylmethylchitosan and Cetyltrimethylammonium Bromide

The dynamic surface elasticity of the solution of carboxymethylchitosan (CMCH) and cetyltrimethylammonium bromide (C₁₆TAB) was measured as a function of the surfactant concentration and the surface age by the oscillating drop method. The results showed that the surface layer of the CMCH/C₁₆TAB solution transformed from loose to structured with the increase in the surfactant concentration. The surface elasticity versus the surface pressure curve during the adsorption showed different features at different surfactant concentration ranges, which was connected with the structural transformation of the surface layer. Our results show that the measurement of dynamic surface dilational properties is a powerful tool for studying the surface kinetics, which is helpful for dealing non-equilibrium systems in industry.     

Mechanism and Influencing Factors of Wettability Alteration of Water-Wet Sandstone Surface by CTAB

Different experimental methods including ellipsometry, zeta potential measurements, imbibition studies, and contact angle measurements were used to study the mechanism and influencing factors of wettability alteration of water-wet sandstone surface caused by CTAB (hexadecyl trimethyl ammonium bromide). Results show that when the concentration of CTAB reaches a certain level (below CMC), due to the electrostatic attraction between the positively charged head groups of CTAB and the negatively charged sandstone surface, the monolayer of CTAB is formed and hydrophobic chains of CTAB molecules are toward the aqueous phase, making the solid surface oil-wet. When the concentration of CTAB continues to increase (above CMC), due to the hydrophobic interaction, the compact bilayer of CTAB is formed and hydrophilic head groups of CTAB molecules are toward the aqueous phase, rendering the solid surface water-wet. The contact angles between the oil–water interface and the surface treated with CTAB increase with the increase of the concentration of NaCl and CaCl_2. Compared to NaCl, the inorganic salt CaCl₂ has a greater impact on the contact angle. In addition, the contact angles increase with the increase of temperature and decrease with the increase of pH value of the aqueous solution.     

Surface and Catalytic Properties of K/V Catalysts Coating on Porous Al2O3 Substrate

The morphology of different ratio K/V catalysts supported on porous α‐alumina substrate was investigated by atomic force microscopy (AFM). Changes in the particle size distribution, pore size distribution were analyzed respectively using AFM software. In addition, their catalytic activities and compositions for carbon oxidation were studied by x‐ray diffraction (XRD), differential scanning calorimetry (DSC), and temperature‐programmed reactions (TPR). As a result, with the increase of K concentration, the mean particle size gradually increased and the mean pore size decreased. According to the catalytic activity studies, the catalytic activity of the KVO₃ and K₃V₅O₁₄ phases are more effective than KCl.     

Mono- and Di-valent Salts as Modifiers of PEO-PPO-PEO Block Copolymer Interactions with Silica Nanoparticles in Aqueous Dispersions

Colloidal stabilization of nanoparticle dispersions is central to applications including coatings, mineral extraction, and dispersion of oil spills in oceanic environments, which often involves oil-mineral-aggregates (OMAs). We have an ongoing interest in the modulation of amphiphile micellization and adsorption behavior in aqueous colloidal dispersions in the presence of various additives. Here we evaluate the effect of added salts CaCl₂, MgCl₂, and NaCl on the micellization and adsorption behavior of the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer Pluronic P105 (EO₃₇PO₅₆EO₃₇). In 0.10 wt% silica nanoparticle (10.6 nm average diameter) dispersion, adsorbed block copolymer layer formation begins at a critical surface micelle concentration (csmc) of 0.02 wt%, well below the critical micellization concentration of Pluronic P105 in water. Dye solubilization experiments demonstrate an increase in the csmc upon addition of each salt. Each added salt reaches a level of maximum effectiveness in its ability to disfavor Pluronic P105 adsorption at the silica surface. These peak levels occur at concentrations of 0.005, 0.03, and 0.05 M for CaCl₂, MgCl₂, and NaCl, respectively, in the presence of 0.10 wt% silica nanoparticles. We explain these results in the context of an electrostatic displacer mechanism and discuss possible connections to OMA-dispersant formation.     

Interaction of Sodium Dodecyl Sulfate with Poly(ethyleneimine) in Bulk Solution and at the Air-Solution Interface

Interaction of sodium dodecyl sulfate (SDS) with the cationic polyelectrolyte poly(ethyleneimine) (PEI) was investigated in this study. Turbidity measurements were performed in order to analyze the interaction and complex formation in bulk solution as a function of polymer concentration and pH. Surface tension measurements were made to investigate the properties of SDS/PEI/water mixtures at air/solution interface. Results revealed that SDS/PEI complexes form in solution depending on the surfactant and polymer concentration. A decrease was observed in surface tension values in the presence of SDS/PEI mixtures compared to the values of pure SDS solutions. Both solution and interfacial properties exhibited pH dependent behavior. A shift was seen in the critical micelle concentration of SDS solutions as a function of PEI concentration and solution pH. Monovalent and divalent salt additions showed some influence on the interfacial properties of SDS solutions in the presence of PEI.     

Synthesis and Characterization of Functionalized Polyorganosiloxanes Containing Amino and Fluorocarbon Side Chains

A series of functional polyorganosiloxanes containing fluorocarbon side chain and amino groups had been synthesized by ring-opening polymerization. The raw materials used were Octamethyl cyclotetrasiloxane (D₄), dodecafluoroheptyl-propyl-trimethoxylsilane (502) and γ-aminopropyltriethoxylsilane (550), respectively. FTIR, ¹H-NMR, ¹³C-NMR, and ¹⁹F-NMR were used to characterize the copolymer structures. The surface properties of the functional polyorganosiloxanes emulsions were discussed. The results showed that the functional polyorganosiloxanes containing fluorocarbon and amino side chains had low surface tension and excellent water repellency.     

Effect of Discrete Macroion Charge Distributions on Electric Double Layer of a Spherical Macroion

The effect of replacing the conventional uniform macroion surface charge density with discrete macroion charge distributions on the structure of electric double layer (EDL) of a spherical macroion has been investigated by Monte Carlo (MC) simulations. Two discrete models have been investigated in addition to the central macroion charge: point charges localized on the macroion surface and finite-sized charges protruding into the solution. Both models have been studied with fixed and mobile macroion charges. The radial functions of local densities and electrostatic potential in EDL, are calculated and compared to the results obtained for the central macroion charge distribution. It is concluded that the model of charge distribution significantly affects the EDL structure close to the macroion, while the effect is much weaker at larger distances. With point charges localized on the macroion surface, counterions become stronger accumulated to the macroion, as a result the absolute values of surface potential ?₀ and zeta ξ potential are decreased. With protruding charges, the excluded volume effect dominates over the increased correlation ability; hence the counterions are less accumulated near the macroions and the absolute values of ?₀ and ξ potentials are increased.     

Surface Properties and Solubility of Simvastatin in the Micelles of Polyglycerol Diisostearate Ethoxylates

A series of polyglycerol diisostearate ethoxylates with two hydrophobic chains were prepared by the reaction of polyglycerol diisostearate with ethylene oxide. Surface properties including water solubility, cloud temperature, critical micelle concentration, emulsification, and the solubilizing capacity of polyglycerol diisostearate ethoxylates for simvastatin were investigated in comparison with those of Tween‐80. The critical micelle concentrations of all polyglycerol diisostearate ethoxylates are less than 0.01 mmol l^?1, which is one order of magnitude lower than that of Tween‐80. Polyglycerol diisostearate ethoxylates show better emulsification than Tween‐80. For enhancing the solubility of simvastatin in micelles, polyglycerol diisostearate ethoxylates also are superior to Tween‐80.     

Antibacterial and Antifungal Activities—Surface Active Properties Relation of Novel Dischiff Base Cationic Gemini Amphiphiles Bearing Homogeneous Hydrophobes

A novel series of cationic Gemini amphiphiles containing Dischiff base species were synthesized and their chemical structures were determined using different analytical tools. Their surface properties were determined using surface tension measurements. The adsorption and micellization thermodynamic parameters were calculated using Gibb's equations at 25°C. The surface parameters were also determined including critical micelle concentration, effectiveness, efficiency, maximum surface excess, minimum surface area, interfacial tension, and emulsification power. The synthesized cationic Gemini surfactants were evaluated as bactericides for gram negative and gram positive bacteria and also against sulfur reducing bacteria (SRB). The results of the cytotoxicity of the synthesized compounds against the targeted bacterial strains were promising and completely dependent on the surface activity of these compounds.     

Synthesis of Amphoteric Surfactants via Esterification Process

This article describes the synthesis of a novel amphoteric surfactant through esterification of 2‐hydroxy‐N,N,N‐trimethylethanaminium chloride with maleic acid alkyl ester of C₈, C₁₀, and C₁₂ chain length in the presence of base. Maleic acid alkyl esters were synthesized by the reaction of maleic anhydride with alkyl alcohol. Surface‐active properties were studied by different techniques such as surface tension and foaming property. Critical micelle concentrations (CMCs) were found by using surface tension values to learn the effect of chain length on CMC of synthesized surfactants. The best result obtained has minimal coproducts, an environmentally safer route, and a very good CMC value of surfactants.