电流并联负反馈放大器实验的研究

用实验的方法，研究电流并联负反馈对放大器性能的改善，提出电流型、并联型负反馈放大器性能参数的测量方法。     

Separate Polarization Modes Synchronization and Synchronization Switches between Vertical-Cavity Surface-Emitting Lasers

For vertical-cavity surface-emitting lasers (VCSELs) with polarization-rotated feedback, there exist several synchronization types such as synchronizations between total powers and synchronizations between separate polarization modes. Based on the two-mode rate equations, we study and compare numerically the performances of different synchronization types. Our results show that three synchronization types exhibit good performances when their synchronization conditions are satisfied. They are the complete synchronization between total powers, complete synchronization between x-polarized modes, and generalized synchronization between x-polarized and y-polarized modes. The former two types are sensitive to the injection rate and spontaneous emission, while the third type is contrary. Synchronization type with the best performance may switch from one to another, with changing of injection rate and spontaneous emission factor.     

增强型延迟反馈法控制低维混沌系统的解析研究

基于时间延迟反馈控制混沌系统的方法,提出一种增强型控制方案,并利用分析延迟系统产生Hopf分支条件的方法,给出这种方案控制低维连续自治混沌系统时,在达到控制目标的条件下,控制参数的一般解析关系.将这一方案和分析方法应用到两个混沌模型中,结果表明:采用修正的方案可以明显地改善控制混沌的效果和质量;解析分析的结果与实际数值计算的结果一致. 关键词： 延迟反馈 混沌控制 Hopf分支     

机器人头部的视觉跟踪系统研究

对运动目标进行识别和跟踪是机器人视觉的一项关键技术。提出了一种可以快速跟踪运动目标的系统设计方案,采用了双计算机处理和Memolink通信方式的机器人控制结构,以图像处理为基础,在图像经过校正之后,通过区域分割和目标识别两个步骤来确定目标的位置,并控制机器人对目标进行跟踪。实验表明,该方法具有较高的速度和准确性。     

浅谈防空夜视装备的发展

针对我军现代夜间反空袭作战的制约瓶颈——缺乏夜视装备，提出在预警领域采用被动红外周视扫描系统，在先进的火控领域采用制冷式红外热成像系统．在老式的防空火控系统上利用微光和非制冷红外技术进行改造的方案比较符合我国国情，也是比较现实和可行的。     

Submicrometric Displacement and Vibration Measurement Using Optical Feedback in a Fiber Laser

A very simple and efficient technique for the remote sensing of a noncooperative target is presented. This technique is based on the frequency-shifted reinjection of light in a class B laser. Ytterbium- and erbium-doped fiber lasers have both been used to measure displacements with a submicrometric resolution and the vibration power spectrum of an object.     

一种控制掺铒光纤激光器超混沌的方法——非线性延时反馈参数调制法

提出一种非线性延时反馈参数调制法来控制混沌/超混沌，给出了利用这种方法控制处于超混沌状态的双环掺铒光纤激光器的方案.数值模拟表明，只要延时时间和反馈强度合适就可以把双环掺铒光纤激光器从超混沌状态成功地控制到不同的周期状态. 关键词： 掺铒光纤激光器 超混沌 非线性延时反馈参数调制 混沌控制     

Non-linearity of the interactions between bottom-up and top-down signals in multistable visual perception

Summary Both bottom-up sensory information and top-down influences contribute to the perception processes. We studied the perceptual alternations of a multistable ambiguous pattern. We observed that it is possible to interfere on the process of the perception alternance by means of subliminal visual stimuli, which either contrast or second the previous perception. We investigated also the effect of the top-down volitional factor on the perceptual alternation. By using a combination of such top-down factor and bottom-up stimulation, we ascertained that a non-linear type of interaction occurs between the two above factors. Paper presented at the International Workshop ?Fluctuations in Physics and Biology: Stochastic Resonance, Signal Processing and Related Phenomena?, Elba, 5–10 June 1994.     

HL—1装置等离子体密度反馈实验

本文叙述HL-1装置用反馈脉冲补充送气方式控制等离子体密度的方法及实验结果。给出了在固有的物理实验条件下的最佳反馈方式,实现了对密度的有效控制及反馈。讨论了在不同密度条件下的几种反馈方式及反馈系统尚存在的不足之处。     

基于机器视觉的离散傅里叶变换目标识别方法

提出了一种基于机器视觉与离散傅里叶变换的目标特征识别方法。利用计算机图像技术采集和处理图像信号;利用离散的傅里叶变换对图像数据提取特征,能够更好的辨别数据细节,从而可通过图像的比对来实现目标的识别。该方法在对实际的静止图像进行处理与计算后,能够很好的对图像的细节变化进行识别。